Dear coreboot folks,
In #coreboot@irc.libera.chat a user reported, that flashing coreboot built from master (commit aa8b1f8b38 (mb/system76: Configure I2C HID IRQs as level triggered)) to SPI2 does not boot.
Display black but lit, no display output. I don't have coreboot logs. Blinking power button + micmute button.
Unfortunately, the user does not have any equipment to get any logs, and SPI flash console is not supported.
Could somebody with such equipment please verify, and provide the logs?
Kind regards,
Paul
PS: `defconfig`:
``` CONFIG_VENDOR_LENOVO=y CONFIG_CBFS_SIZE=0x400000 CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=1600 CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=2560 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_HAVE_IFD_BIN=y CONFIG_PCIEXP_HOTPLUG_BUSES=8 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000 CONFIG_BOARD_LENOVO_X230=y CONFIG_UART_PCI_ADDR=0x0 CONFIG_VALIDATE_INTEL_DESCRIPTOR=y CONFIG_H8_SUPPORT_BT_ON_WIFI=y CONFIG_HAVE_ME_BIN=y CONFIG_CHECK_ME=y CONFIG_USE_ME_CLEANER=y CONFIG_HAVE_GBE_BIN=y CONFIG_LOCK_MANAGEMENT_ENGINE=y CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y CONFIG_PCIEXP_HOTPLUG_IO=0x2000 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 CONFIG_POST_IO_PORT=0x80 CONFIG_PAYLOAD_GRUB2=y CONFIG_GRUB2_REVISION=y CONFIG_GRUB2_REVISION_ID="grub-2.06" CONFIG_GRUB2_EXTRA_MODULES="nativedisk crypto cryptodisk luks luks2 gcry_serpent gcry_twofish gcry_rijndael gcry_sha1 gcry_sha256 gcry_sha512 gcry_crc password_pbkdf2 part_gpt btrfs cat bsd png gfxterm_background all_video usbserial_ftdi usbserial_pl2303" CONFIG_COREINFO_SECONDARY_PAYLOAD=y CONFIG_MEMTEST_SECONDARY_PAYLOAD=y CONFIG_NVRAMCUI_SECONDARY_PAYLOAD=y ```