Hi,
With no working power button or LEDs, I would suspect an EC issue. Have you examined what the dumps contained?

Cleaning ME doesn't help (I found that out too). I'm also going to assume that your laptop has neither Boot Guard nor HP SureStart (as I understand, Boot Guard implemented in the EC?)

On Mon., Mar. 16, 2020, 8:18 a.m. Evgenii Moz. via coreboot, <coreboot@coreboot.org> wrote:
Hello.
For some time now I've been trying to port my laptop with no luck, yet.
Here's what I did:
• I recovered all the log's from the system, as per Motherboard_Porting_Guide and coreboot-collector.
• Took apart my laptop and dumped eeproms via soldering off, it appears I have w25q80dv - 8mbit and w25q64fv - 64mbit. I made sure the dumps are valid, doublechecked via diff and purged the eeproms, system booted normally when I flashed the dumps back.
• I made an amature coreboot config based on Mimoja's Razer Blade Stealth (2016) H2U which is now merged. I failed in adapting devicetree.cb and left it as is. The laptop showed no signs of life (dead PB and no lights) after externally flashing w25q64fv - 64mbit with coreboot combined with original Descriptor and stripped down ME via nconfig (probably should not have done that for 1st boot). Flashed the dumps back, no bork just yet =)
• I have yet to create a position on Gerrit.
P.S. not including the eeprom dumps, too heavy for a public mailing list. Will send on demand.

I would be glad to receive any help, please do guide me.
-- 

Mozhaaak
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-leave@coreboot.org