Is there a good link to this tool chain?
 
I was useing a mother board with the Intel 810 chipset. But I have other projects I plan on using...I have a board with an FPGA that I plan on using too. But I need something to strat with as a Bootloader, so this is why I want to use Coreboot.
 
> Date: Sun, 29 May 2011 20:05:47 +0300
> From: cristi.magherusan@net.utcluj.ro
> To: r_boulware@hotmail.com
> CC: neverforget_2002@163.com; vidwer@gmail.com; coreboot@coreboot.org
> Subject: Re: [coreboot] haveing troubling building core boot!
>
> Īn Vin, Mai 27, 2011 16:11, Raleigh Boulware a scris:
> >
>
> > How do I get the latest binutils? can someone send me a link?
> >
> >
> Hello,
>
> As said before by someone else, the recommended procedure is to use the
> cross-compiler toolchain.
> In order to get this toolchain installed, I suggest you use 'make
> crossgcc'. It will take a while to finish, but then the coreboot code
> should compile properly.
>
> I'm just curious, on which motherboard do you plan to use coreboot?
>
> Cheers,
> Cristi
>
>
> --
> coreboot mailing list: coreboot@coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot