Hi,

This may be a very basic simple question, but I do not know a very good answer/solution

to do this.

If I want to burn LinuxBIOS, I can use the burn_mtd script , it may write it

successfully as well, but if linuxbios is not correctly built. I cannot get the

any O.S started on this machine, which means I would need to replace the

BIOS FLASH ROM with a one with proper BIOS and bring up the machine.

Is there a way I can re-program the old BIOS on to the corrupted FLASH ROMS.

Please note,I do not have a PLC or any kind of FLASH programmer with me. Can

I do without it.

If there are any suggestions, please let me know.

Thanks and Regards

Deepak