Re: [coreboot] thinkpad t430s bios eeprom location

[Zaolin]

Hi,

I did that more than 2 times with different Thinkpads. Just flash coreboot
in order to access the EEPROM via i2c in operating system (see. i2c-tools).
That's the easiest way I guess.

Best Regards
Zaolin

On 06/11/2016 10:15 PM, Peter Stuge wrote:
> Anthony Martin wrote:
> > what's the best way to attach to the WSON without desoldering it?
> > I don't really want to remove it but I will if necessary.
>
> Try soldering wires to the pads on the mainboard, but be prepared that it
> might not really work out.
>
> The WSON packages usually have an exposed center pad, so you'll need
> quite a bit of heat to get it off. Probably easiest with hot air.
>
> //Peter