Hi,
I have coreboot running on my Denverton C3538 platform with Grub2 payload and the boot up log is as attached file. But whatever configuration I have changed in coreboot or FITC, the USB interfaces
always cannot work. I have verified my hardware by BIOS code and it is ok. So I guess maybe I have incorrect setting somewhere in coreboot or grub2. In grub prompt, I only can see following but no plugged in USB dongle:
grub> ls
(memdisk) (cbfsdisk)
grub>
By the way, the reference configuration is Harcuvar CRB.
I would be grateful if someone can help.
-Hilbert
From: Hilbert Tu(杜睿哲_Pegatron)
Sent: Tuesday, August 07, 2018 1:57 PM
To: coreboot@coreboot.org
Subject: RE: Denverton FSP usage
I found the related setting under “Generic Drivers” -> “Use FSP TempRamInit & TempRamExit APIs”. Ha.
-Hilbert
From: Hilbert Tu(杜睿哲_Pegatron)
Sent: Monday, August 06, 2018 6:21 PM
To: coreboot@coreboot.org
Subject: Denverton FSP usage
Hi,
I have an Intel Denverton (C3538) CPU board and try to use coreboot 4.8 to boot it up. The FSP I have consisted of 3 parts as FSP-T, FSP-M, FSP-S, but I don’t see the settings for specifying FSP-T in coreboot’s menuconfig.
From the debug output, I got error code 2526 and I doubt it is due to lack of including FSP-T. Is there anyone can tell how to correctly use FSP-T? Thanks.
-Hilbert