Well. well, well... We have here major architectural break?! It seems that IFWI is after all replacing FSP (as clean cut first stage boot-loader)???

FSP is going to slip to oblivion, don't you all think?

It seems that we have here new, two stage boot-loader approach, with MBR sector, containing booting U-Boot data in-between! ;-)

Very interesting observation, I should say. Waiting for unwinding the ball.

Zoran

---------- Forwarded message ----------
From: Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com>
Date: Thu, Oct 5, 2017 at 1:27 PM
Subject: Re: [U-Boot] Broadwell-DE bare metal
To: Bin Meng <bmeng.cn@gmail.com>
Cc: vnktux <vnktux@protonmail.com>, "u-boot@lists.denx.de" <u-boot@lists.denx.de>

> So far Broadwell-DE is not supported in U-Boot. However it is on my todo list.

Excellent thread! Just what I needed, and was thinking to enter! ;-)

What will be the architecture of this porting effort? The same question as I have asked an hour ago for ATOM E3900/APL-I.

Thank you in advance,

Zoran Stojsavljevic
_______

On Thu, Oct 5, 2017 at 1:21 PM, Bin Meng <bmeng.cn@gmail.com> wrote:

Hi,

On Thu, Oct 5, 2017 at 5:43 PM, vnktux <vnktux@protonmail.com> wrote:
> Hi Bin,
>
> Thanks a lot for the reply. Is there something I can do to help you? I mean
> that's my graduation project and I will have to work on it either I succed
> or not, and here I have available hardware aswell.
>

If you can't wait, you can start trying to port U-Boot on your
Broadwell-DE board, and I can help review. Thanks!

Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot