Hi!

No, “sensors-detect” founds my SuperIO and needed kernel module is installed in system correctly.

The problem is in “sensors” command. It displays all voltages and pch temperatures correctly, except of PECI temperature from CPU, PECI agent temp is always zero.

From: Pierre P [mailto:ppz@outlook.fr]
Sent: Monday, January 23, 2017 6:02 PM
To: coreboot@coreboot.org; Аладышев Константин
Subject: Re: [coreboot] PECI temperature in lm-sensors

Hi,

Had a similar issue on a KCMA-D8. When running sensors-detect you have to force probing of i2c chips (default choice is "NO" if you just press enter when asked) then hopefully with one of them it will detect other sensors.

Hope this helps

Pierre

---

From: coreboot <coreboot-bounces@coreboot.org> on behalf of Аладышев Константин <aladyshev@nicevt.ru>
Sent: Monday, January 23, 2017 3:17 PM
To: coreboot@coreboot.org
Subject: [coreboot] PECI temperature in lm-sensors

Does someone have any experience with enabling PECI monitoring on nuvoton
SuperIOs ?

I'm trying to enable it on board with Haswell+Lynxpoint CPU and  NCT6776
SuperIO.

But all I see in lm-sensors output for now is zero temperature for PECI
Agent.

Does coreboot have any SuperIO chips/Intel CPUs/motherboards, that have this
functional enabled? What is usually need to be done to enable PECI
monitoring?




--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot