On Wed, Dec 24, 2008 at 12:14 AM, Corey Osgood <corey.osgood@gmail.com> wrote:

> *phew* I was worried that was how v3 was always going to run. As for those
> times Ron, stage0 takes <1 second, initram is ~5 seconds,

the initram seems way too long. But that stage 2 tells me you have
some real problems with your dram setup.

It could have been less, timing output from a serial port with a stopwatch isn't very exact. I don't think there's anything wrong with the dram setup, I ran memtest86 overnight without any errors.

I know nothing about this part. I wonder if you could dump your mtrr
settings and let us see them.

Sure, what point do you want them from? End of stage1?

-Corey