Linux version 2.6.21 (2.6.21-4) (root@flashgordon) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Sat Jun 16 10:16:51 CEST 2007
Command line: root=/dev/sda2 ro console=ttyS0,115200
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
 BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Entering add_active_range(0, 1, 160) 0 entries of 3200 used
Entering add_active_range(0, 192, 240) 1 entries of 3200 used
Entering add_active_range(0, 256, 786432) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 3 entries of 3200 used
end_pfn_map = 1310720
DMI not present or invalid.
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 0000000140000000
Entering add_active_range(0, 1, 160) 0 entries of 3200 used
Entering add_active_range(0, 192, 240) 1 entries of 3200 used
Entering add_active_range(0, 256, 786432) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 3 entries of 3200 used
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-0000000140000000
Zone PFN ranges:
  DMA             1 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1310720
early_node_map[4] active PFN ranges
    0:        1 ->      160
    0:      192 ->      240
    0:      256 ->   786432
    0:  1048576 ->  1310720
On node 0 totalpages: 1048527
  DMA zone: 55 pages used for memmap
  DMA zone: 1077 pages reserved
  DMA zone: 2915 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 768056 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI       MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #2 at 0xF6144000.
Setting APIC routing to physical flat
Processors: 2
Nosave address range: 00000000000a0000 - 00000000000c0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000c0000000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:40000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37504 bytes of per cpu data
Built 1 zonelists.  Total pages: 1029531
Kernel command line: root=/dev/sda2 ro console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2400.010 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ f0000000 size 64 MB
Memory: 4111716k/5242880k available (2225k kernel code, 82392k reserved, 1064k data, 312k init)
Calibrating delay using timer specific routine.. 4803.84 BogoMIPS (lpj=9607687)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
Using local APIC timer interrupts.
result 12500068
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.26 BogoMIPS (lpj=9600526)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
Brought up 2 CPUs
migration_cost=191
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:07:00.0
PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 17
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
  IO window: 1000-1fff
  MEM window: f4000000-f60fffff
  PREFETCH window: e0000000-efffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1182444404.356:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
sata_nv 0000:00:05.0: version 3.3
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 20
ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 20
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013017
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
PCI: Setting latency timer of device 0000:00:05.1 to 64
ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 23
ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 23
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013027
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013037
PCI: Setting latency timer of device 0000:00:05.2 to 64
ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21
ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21
scsi4 : sata_nv
ata5: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013047
scsi5 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013057
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 312k freed
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2c40
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2c80
input: PC Speaker as /class/input/input1
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf614a000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
PCI: Setting latency timer of device 0000:00:04.0 to 64
    ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6145000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
PCI: Setting latency timer of device 0000:00:06.1 to 64
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usb 2-10: new low speed USB device using ohci_hcd and address 2
usb 2-10: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 1241:1166 as /class/input/input2
input: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-10
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Adding 7815580k swap on /dev/sda1.  Priority:-1 extents:1 across:7815580k
EXT3 FS on sda2, internal journal
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
powernow_k8: Unknown symbol acpi_processor_notify_smm
powernow_k8: Unknown symbol acpi_processor_unregister_performance
powernow_k8: Unknown symbol acpi_processor_register_performance
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=2056012kB.
it87: Found IT8716F chip at 0x290, revision 0
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
eth2: no IPv6 routers present