We have a kernel patch which adds pinctrl/GPIO support for Intel Denverton SoC (https://patchwork.kernel.org/patch/9879473/ ) to make possible to access the GPIO from user space (via sysfs, i.e. /sys/kernel/debug/pinctrl/), however this patch is expects a "INTC3000" GPIO controller definition in the ACPI tables.I want to add/implement the INTC3000 in the ASL code, but since I don´t want to reinvent the wheel I´m asking if such ASL code is already available somewhere (at least in the Intel Pine Lake CRB there´s no such reference to INTC3000 in the ACPI tables).I have a set of patches that still need some work (https://review.coreboot.org/c/coreboot/+/24928 ) that enable some shared code for GPIO; following I also have more patches to use the ACPI code from common block too (not published yet). I didn’t check but probably apollolake or cannonlake has the ACPI code for GPIO (using common block).If you are interested I can probably work on adding the ACPI implementation to Gerrit sooner.Best Regards,Julien--Thanks,Sumo
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot --Julien Viard de Galbert - jviarddegalbert@online.netOnline / Scaleway
Looking for an amazing job? Join us NOW ! https://careers.scaleway.com/