Thanks.

It works and I can see something (just splash of colors) on my CRT.
The screen, though it is not usable,  is brought up by original VGABIOS using ADLO.

Heechul.

> -----Original Message-----
> From: Andrew Ip [mailto:aip@cwlinux.com]
> Sent: Monday, March 17, 2003 3:28 PM
> To: hcyun@etri.re.kr
> Cc: linuxbios@clustermatic.org
> Subject: Re: ADLO for EPIA
>
>
> Heechul,
>
> > With current linuxbios for EPIA, I found that  internel
> graphic device (bus
> > 1, dev 0 ) is not visible in the pci configuration space. I
> have tried to
> > enable this by setting PP_Rx3E and RxA9 registers, but with failed.
> > Do you know how to make it visible?
> Including this setup will enable the vga device.  Hope this help.
>
> -Andrew
>
> --
> Andrew Ip
> Email:  aip@cwlinux.com
> Tel:    (852) 2542 2046
> Fax:    (852) 2542 2036
> Mobile: (852) 9201 9866
>
> Cwlinux Limited
> Unit 202B 2/F Lai Cheong Factory Building,
> 479-479A Castle Peak Road,
> Lai Chi Kok, Kowloon,
> Hong Kong.
>
> Tel: (852)2542 2046
> Fax: (852)2542 2036
>
> For public pgp key, please obtain it from http://www.keyserver.net/en.
>