It works and I can see something (just splash of colors) on my CRT. The screen, though it is not usable, is brought up by original VGABIOS using ADLO.
-----Original Message----- From: Andrew Ip [mailto:email@example.com] Sent: Monday, March 17, 2003 3:28 PM To: firstname.lastname@example.org Cc: email@example.com Subject: Re: ADLO for EPIA
With current linuxbios for EPIA, I found that internel
graphic device (bus
1, dev 0 ) is not visible in the pci configuration space. I
have tried to
enable this by setting PP_Rx3E and RxA9 registers, but with failed. Do you know how to make it visible?
Including this setup will enable the vga device. Hope this help.
-- Andrew Ip Email: firstname.lastname@example.org Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866
Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong.
Tel: (852)2542 2046 Fax: (852)2542 2036
For public pgp key, please obtain it from http://www.keyserver.net/en.