Dear Corebootmembers,
herewith I submit outputs of flasrom, dmidecode, lspci and superiotool for my motherboards at hand. { flashrom -V > flashrom-V.txt lspci -nnvvvxxxx > lspci-nnvvvxxxx.txt superiotool -edV > superiotool-edV.txt dmidecode > dmidecode.txt }
Is there any database|wiki which stores this data? Is an automatic system to gather and show these data useful? [Motherboard|Chipsets|IO|whatever needed]
I'm splitting the information over seperate emails.
Regards, Joachim Ernst
# dmidecode 2.9 SMBIOS 2.3 present. 49 structures occupying 1397 bytes. Table at 0x000F2940.
Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: Award Software, Inc. Version: ASUS A7V133-C ACPI BIOS Revision 1010 Beta 001-B Release Date: 02/11/2003 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 256 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported
Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: System Manufacturer Product Name: System Name Version: System Version Serial Number: SYS-1234567890 UUID: Not Settable Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: A7V133-C Version: REV 1.xx Serial Number: xxxxxxxxxxx
Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Chassis Manufacture Type: Tower Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Asset-1234567890 Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: Unknown OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 32 bytes Processor Information Socket Designation: SOCKET A Type: Central Processor Family: Other Manufacturer: AuthenticAMD ID: 62 06 00 00 FF F9 83 03 Signature: Family 6, Model 6, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD Athlon(TM) XP Processor Voltage: 1.7 V External Clock: 100 MHz Max Speed: 1800 MHz Current Speed: 1100 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0009 L2 Cache Handle: 0x000A L3 Cache Handle: Not Provided
Handle 0x0005, DMI type 5, 22 bytes Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 3072 MB Supported Speeds: Other Supported Memory Types: Other DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 3 0x0006 0x0007 0x0008 Enabled Error Correcting Capabilities: Unknown
Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM 1 Bank Connections: 0 1 Current Speed: Unknown Type: Other DIMM SDRAM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM 2 Bank Connections: 2 3 Current Speed: Unknown Type: Other DIMM SDRAM Installed Size: 128 MB (Single-bank Connection) Enabled Size: 128 MB (Single-bank Connection) Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM 3 Bank Connections: 4 5 Current Speed: Unknown Type: Other DIMM SDRAM Installed Size: 256 MB (Single-bank Connection) Enabled Size: 256 MB (Single-bank Connection) Error Status: OK
Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Data Associativity: 4-way Set-associative
Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 256 KB Maximum Size: 8192 KB Supported SRAM Types: Pipeline Burst Synchronous Installed SRAM Type: Pipeline Burst Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Data Associativity: 4-way Set-associative
Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE/HDD Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: None
Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE/HDD Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: None
Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: None
Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Access Bus (USB) Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: PS/2 Keybaord External Connector Type: PS/2 Port Type: Keyboard Port
Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: PS/2 Port Type: Mouse Port
Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Parallel Port External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP
Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Serial Port 1 External Connector Type: DB-9 male Port Type: Serial Port 16550 Compatible
Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Serial Port 2 External Connector Type: DB-9 male Port Type: Serial Port 16550 Compatible
Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Joystick Port External Connector Type: DB-15 female Port Type: Joystick Port
Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: MIDI Port External Connector Type: DB-15 female Port Type: MIDI Port
Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Line In Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port
Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Video Port External Connector Type: Mini Jack (headphones) Port Type: Video Port
Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: PCI 1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported
Handle 0x001C, DMI type 9, 13 bytes System Slot Information Designation: PCI 2 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported
Handle 0x001D, DMI type 9, 13 bytes System Slot Information Designation: PCI 3 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported
Handle 0x001E, DMI type 9, 13 bytes System Slot Information Designation: PCI 4 Type: 32-bit PCI Current Usage: Available Length: Short ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported
Handle 0x001F, DMI type 9, 13 bytes System Slot Information Designation: PCI 5 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit AGP 4x Current Usage: In Use Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided
Handle 0x0021, DMI type 9, 13 bytes System Slot Information Designation: AMR Type: 32-bit I/O Riser Card Current Usage: In Use Length: Long Characteristics: 5.0 V is provided 3.3 V is provided
Handle 0x0022, DMI type 10, 6 bytes On Board Device Information Type: Other Status: Disabled Description: Promise PDC20265
Handle 0x0023, DMI type 11, 5 bytes OEM Strings String 1: 0 String 2: 0
Handle 0x0024, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1
Handle 0x0025, DMI type 14, 14 bytes Group Associations Name: Cpu Module Items: 3 0x0004 (Processor) 0x0009 (Cache) 0x000A (Cache)
Handle 0x0026, DMI type 14, 29 bytes Group Associations Name: Memory Module Set Items: 8 0x0027 (Physical Memory Array) 0x0028 (Memory Device) 0x002C (Memory Device Mapped Address) 0x0029 (Memory Device) 0x002D (Memory Device Mapped Address) 0x002A (Memory Device) 0x002E (Memory Device Mapped Address) 0x002B (Memory Array Mapped Address)
Handle 0x0027, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1536 MB Error Information Handle: Not Provided Number Of Devices: 3
Handle 0x0028, DMI type 17, 23 bytes Memory Device Array Handle: 0x0027 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: DIMM 1 Bank Locator: Not Specified Type: DRAM Type Detail: Synchronous Speed: Unknown
Handle 0x0029, DMI type 17, 23 bytes Memory Device Array Handle: 0x0027 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 128 MB Form Factor: DIMM Set: 2 Locator: DIMM 2 Bank Locator: Not Specified Type: DRAM Type Detail: Synchronous Speed: Unknown
Handle 0x002A, DMI type 17, 23 bytes Memory Device Array Handle: 0x0027 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 256 MB Form Factor: DIMM Set: 3 Locator: DIMM 3 Bank Locator: Not Specified Type: DRAM Type Detail: Synchronous Speed: Unknown
Handle 0x002B, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x060000003FF Range Size: 402653185 kB Physical Array Handle: 0x0027 Partition Width: 0
Handle 0x002C, DMI type 126, 19 bytes Inactive
Handle 0x002D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x00007FFFFFF Range Size: 128 MB Physical Device Handle: 0x0029 Memory Array Mapped Address Handle: 0x002B Partition Row Position: 2
Handle 0x002E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00008000000 Ending Address: 0x00017FFFFFF Range Size: 256 MB Physical Device Handle: 0x002A Memory Array Mapped Address Handle: 0x002B Partition Row Position: 3
Handle 0x002F, DMI type 32, 11 bytes System Boot Information Status: No errors detected
Handle 0x0030, DMI type 127, 4 bytes End Of Table
Calibrating delay loop... 389M loops per second, 100 myus = 199 us. OK. No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x24, id2 0x8 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x24, id2 0x8 Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Atmel AT25DF021, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF081, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321A, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF641, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25F512B, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF041, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF081A, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26F004, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Atmel AT45CS1282, 16896 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB011D, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB021D, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB041D, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB081D, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB161D, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321C, 4224 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321D, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB642D, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x24, id2 0x8 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x24, id2 0x8 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x24, id2 0x8 Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x24, id2 0x8 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L2005, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x24, id2 0x8 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x24, id2 0x8 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0x24, id2 0x8 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x24, id2 0x8 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9b, id2 0x36 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x24, id2 0x8 Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapping detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x24, id2 0x8 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x24, id2 0x8 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x24, id2 0x8 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x24, id2 0x8 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x24, id2 0x8 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x20, id2 0xe2 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x24, id2 0x8, id1 parity violation Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x24, did 0x8 Probing for Atmel unknown Atmel SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8042] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 8 Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00: 06 11 05 03 06 00 10 a2 03 00 00 06 00 08 00 00 10: 08 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 80 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 16 f4 6b b4 07 09 18 18 08 e0 00 00 08 08 18 18 60: 3c aa 03 b0 e4 62 52 00 44 1c 60 2f 08 3f 00 00 70: c8 80 cc 0d 0e a1 d2 00 01 b4 09 02 00 00 00 00 80: 0f 40 00 00 c0 00 00 00 03 00 b6 16 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 c0 20 00 07 02 00 1f 00 00 00 00 6e 02 04 00 b0: 5a ec 80 05 32 33 28 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 84 66 00 00 00 00 00 91 06
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d6000000-d7dfffff Prefetchable memory behind bridge: d7f00000-e3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: shpchp 00: 06 11 05 83 07 00 30 22 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 20: 00 d6 d0 d7 f0 d7 f0 e3 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 08 00 40: c8 cd 18 44 27 72 05 83 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 22 02 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40) Subsystem: ASUSTeK Computer Inc. Device [1043:8042] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: parport_pc Kernel modules: parport_pc 00: 06 11 86 06 87 00 10 02 40 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 09 41 00 c0 00 80 62 ee 01 01 44 00 00 00 00 f3 50: 0e 76 34 00 00 00 b0 50 00 04 ff 08 80 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 25 08 40 82 04 e4 00 00 00 00 00 00 80: 01 00 00 00 00 0d 00 00 00 60 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 41 00 00 00 00 00 00 00 00 00
00:04.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 0b c2 09 3a 1c 10 c0 00 20 99 20 99 dd 00 20 20 50: 17 17 e4 07 14 00 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00 80: 00 80 f8 15 00 00 00 00 00 90 f8 15 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 06 00 71 05 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) Subsystem: First International Computer, Inc. Device [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 17 00 10 02 16 00 03 0c 08 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 25 09 34 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 04 00 00 40: 00 12 03 00 c6 00 36 f4 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) Subsystem: First International Computer, Inc. Device [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 17 00 10 02 16 00 03 0c 08 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 25 09 34 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 04 00 00 40: 00 12 03 00 c2 00 30 cc 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40) Subsystem: ASUSTeK Computer Inc. Device [1043:8042] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: via686a, i2c-viapro 00: 06 11 57 30 00 00 90 02 40 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 80 30: 00 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00 40: 20 80 49 00 1a 10 00 00 01 e4 00 00 48 10 00 00 50: 00 ff ff 04 90 04 00 00 00 ff ff 00 43 10 42 80 60: 00 00 00 00 00 00 00 00 01 00 02 00 00 00 00 00 70: 01 e2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 40 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at a400 [size=256] Region 1: Memory at d5800000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 69 81 17 00 b0 02 10 00 00 02 08 40 00 00 10: 01 a4 00 00 00 00 80 d5 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 69 81 30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 76 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04) Subsystem: Creative Labs Device [1102:1002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: EMU10K1_Audigy Kernel modules: snd-emu10k1 00: 02 11 04 00 05 00 90 02 04 00 01 04 00 20 80 00 10: 01 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 02 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 02 14 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00 50: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04) Subsystem: Creative Labs Device [1102:0060] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: I/O ports at 9800 [size=8] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Emu10k1_gameport Kernel modules: emu10k1-gp 00: 02 11 03 70 05 00 90 02 04 00 80 09 00 20 80 00 10: 01 98 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 60 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10) Subsystem: Creative Labs Device [1102:0010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d4800000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 00: 02 11 01 40 16 00 10 02 04 10 00 0c 08 20 80 00 10: 00 00 00 d5 00 00 80 d4 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 10 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 02 02 04 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 10 04 00 00 84 10 00 00 02 11 10 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) Subsystem: Elsa AG Device [1048:0c64] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at d7ff0000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel modules: nvidiafb, rivafb 00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 40 00 00 10: 00 00 00 d6 08 00 00 d8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 10 64 0c 30: 00 00 ff d7 60 00 00 00 00 00 00 00 0b 01 05 01 40: 48 10 64 0c 02 00 20 00 17 00 00 1f 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
superiotool r3695 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff No Super I/O found