Sorry I meant v36_15_0_1091 (x86) which is the latest on the Intel website that I can find.
I cannot find v188.8.131.527.
I am quite sure the driver is OK but that there is something else fundamental causing the BSOD. I have used it on another system (non coreboot) with an E3845 processor.
From: Zoran Stojsavljevic [mailto:email@example.com]
Sent: Tuesday, 7 June 2016 12:52 PM
To: Naveed Ghori
Subject: Re: [coreboot] BSOD Win7 x86 for Baytrail E3845 Dsplay Driver
Little bit of google searching:
As I understood, you are using 184.108.40.206 (x86 aka 32b). This is very old one.
The latest to use is: 220.127.116.117 for x86 and 18.104.22.1687 for x86_64. Please, contact INTEL for these EMGD based WIN7/WIN 8.1 GFX drivers.
On Tue, Jun 7, 2016 at 5:16 AM, Naveed Ghori <firstname.lastname@example.org> wrote:
I have Windows Embedded Standard 7 x86 working in with SeaBIOS. If I install the graphics driver for it however I get a BSOD while Windows is booting up (screen flashes before the BSOD)
As a Coreboot newbie it would be good to get an idea as to what may cause this. I am thinking video memory allocation.
The error is below:
*** STOP: 0x0000007E (0xC0000005, 0x8D58B437, 0x92717C04, 0x927177E0)
*** igdkmd32.sys – Address 8D58B437 base at 8D423000, DateStamp, 53ac9002
The driver version is the Intel EMGD v 22.214.171.124.
Thanks in advance.
Naveed Ghori | Lead Firmware & Driver Engineer
DTI Group Ltd | Transit Security & Surveillance
31 Affleck Road, Perth Airport, Western Australia 6105, AU
Visit our website www.dti.com.au
The information contained in this email is confidential. If you receive this email in error, please inform DTI Group Ltd via the above contact details. If you are not the intended recipient, you may not use or disclose the information contained in this email or attachments.
coreboot mailing list: email@example.com