Hey,
I extracted 906 from original BIOS.
But it still hangs on after POST 0x92 the same with 907.
Aren't there any possibilities to get more debug information out of FSP?
Best Regards
Michael
> /proc/cpuinfo tells me that the original image is using microcode: 0x906
> but where can I find it?
I do not have 0x906. Please, try 0x907 (attached .inc).
Good Luck!
Zoran
On Sat, Dec 16, 2017 at 2:49 PM, Michael Graichen <michael.graichen@hotmail.com> wrote:
Hey Zoran,
thanks for your help!
Is there some place to look up the connection between CPUID and microcode?
I tested M0130679905.inc but still with the same effect.
So I flashed the original Image and booted Linux.
/proc/cpuinfo tells me that the original image is using microcode: 0x906but where can I find it?
Best Regards
Michael
Am 14.12.2017 um 20:25 schrieb Zoran Stojsavljevic:
> for a E3845 Family: 0x06 Model:0x37 Stepping: 0x09...
This is CPUID 0x30679, which uses MCU M0130679901.h (ONLY this one).
You can also try the following MCU: M0130679905.inc (attached). You need to convert it to .h
Zoran
_______
On Thu, Dec 14, 2017 at 6:15 PM, Michael Graichen <michael.graichen@hotmail.com> wrote:
Hey Piotr,
I'm glad to read that somebody else is working on the Atoms as well.
I'm not sure about my ucode config. At the moment I'm using 5 include files:
M0130673322.h
M0130678806.h
M0130678817.h
M0130679901.h and
M0230672228.h
for a E3845 Family: 0x06 Model:0x37 Stepping: 0x09.
I copied the includes from various FSP's and the FSP_GOLD packages.
I tried other combinations before but then i had no output on the serial
line so I ended up using these five.
What is your Familly/Model/Stepping and what are you using for ucode?
Best Regards
Michael
Am 14.12.2017 um 00:04 schrieb Piotr Król:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA512
>
>
>
> On 12/13/2017 07:29 PM, Michael Graichen wrote:
>> Hey,
> Hi Michael,
>
>> I've bought a Minnowboard Turbot (quad core / E3845) to start
>> developing on the Atom's.
>>
>> I was hopping that it has support like the Minnowboard Max but it
>> get stuck right after FspInitApi(&FspInitParams); in
>> coreboot/src/drivers/intel/fsp1_0/fsp_util.c. The last output i can
>> see is "POST: 0x92" which comes from
>> post_code(POST_FSP_MEMORY_INIT); right before
>> FspInitApi(&FspInitParams);
> I'm not expert in MinnowBoard Turbot, but I play recently with E3826
> and saw similar behavior when incorrect microcode was used (or no
> microcode). What are your ucode configuration ?
>
> Best Regards,
> - --
> Piotr Król
> Embedded Systems Consultant
> https://3mdeb.com | @3mdeb_com
> -----BEGIN PGP SIGNATURE-----
>
> iQIzBAEBCgAdFiEE4DCbLYWmfoRjKeNLsu5x6WeqnkwFAloxsggACgkQsu5x 6Weq
> nkzfPg/+PM8fk80pbmexWQw5IO4LbDOX4vw5LYkrkeTxh/ 3T6hAAjBt7KJ6OA4Ft
> vW8d/Ll37/r7zutrOXemXZRtxulHy4FL/7aGcDdu8JPxnO4ysLGM0fOZxkZt uyNA
> WYI7nS5mYcVdA69driI3rW0cSuGVAy7LiOBIzzV5Z8iWjQXop56cMJiP6In7 zayr
> 7B5XZ6Ix934AzYihK6hZ5Rz5jZyouKb0NJRQLnRB+MljuL4sLa18bnX5NUBq gDxu
> cbw54UYgkgd6CsrbGw3XIGB63k7jYYOUayZwBaqg4QYIxPs798pX5MTe7VMJ neFc
> kmg+t8HHZxQkaF9YjoVwyS5y4/24FgwQ5bROo/ztNqZMz2q0nK6jd7vQjobF KTVb
> Hc7w0jQIY37z3ZConHj9hHeVQ4AILFgpUl+NJj04hekcs4aAwJhbMun7YEAm chkp
> cCsv+WvXmOUZwTZR+CoH1xTYSMIX6JkMDZlmlhR/UGlAdpIkxMKQ6MezJXgy ihvn
> rBBAMDKGvNxeZ00Cf35d+tI9OwDWw/YxYDMV3nx5MzeIkvho4Umg6ey824Ql qxBF
> D+3wYuiB4ZO/uEViYkW62jFOMHxeTZ9lBNdigPsnuclDiXhvAoA1uImsaLHj NHpQ
> xndtfh+FPE3kB6c4koorgXxa3OZacd+4pGDmyjOy7Vl+TZk5hkA=
> =r1Ls
> -----END PGP SIGNATURE-----
>
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot