Cristian Craciunescu wrote:
> I've compiled suport for j8f9 board from jetw. using as template other LX
> mainboard. The system is booting with coreboot/seabios however the serial
> does not seam to work in kernel. GRUB bootloader works ok over serial but as
> soon as the linux kernel finish booting it does not respond over serial but
> it can send messages to serial. Although the IRQs are detected correctly
> when the serial has input I can not see any irq messages incrementing in
> /proc/interrupts. Any hint?Something is wrong with the interrupt setup in coreboot if they are
not being delivered to the kernel.Are you using the internal UART in CS5536 or do you have a superio?
Which board did you use as template?
Can you post a patch with your code so far?
//Peter