Hello Marek,
nice to hear that you're interested in coreboot development. You should ask
your questions on the coreboot mailinglist (coreboot@coreboot.org). Just
forward your original message there, or reply to this mail, adding the
coreboot mailinglist (don't forget to attach your logs).
Am 15.11.2013 17:49, schrieb Marek Doležel:
> Hello there,This really depends on your experience / programming skills and what
>
> I have noticed that you commited some patches for roda rk9. I would like to
> port coreboot to thinkpad r400. I have no previous bios development
> experience. Could you please tell me how hard for beginner should this be?
needs to be done (see below).
Your dmidecode.log shows that you have DDR2 memory. Sadly, our current
> I have attached some interesting dumps. I don't mind working 3 moths to get
> just error message from coreboot during early init.
GM45 chipset code does only support DDR3 (which is used in the Roda
RK9). If this isn't a fault in your DMI tables and you really have DDR2
memory, porting coreboot will be especially hard (some more month of extra
work). OTOH, all other chips (southbridge, super i/o, embedded controller)
might already be supported.
Good luck,
Nico
--
M. Sc. Nico Huber
Berater, SINA-Softwareentwicklung
Public Sector
secunet Security Networks AG
Tel.: +49-201-5454-3635, Fax: +49-201-5454-1325
E-Mail: nico.huber@secunet.com
Mergenthalerallee 77, 65760 Eschborn, Deutschland
www.secunet.com
______________________________________________________________________
Sitz: Kronprinzenstraße 30, 45128 Essen, Deutschland
Amtsgericht Essen HRB 13615
Vorstand: Dr. Rainer Baumgart (Vors.), Willem Bulthuis, Thomas Pleines
Aufsichtsratsvorsitzender: Dr. Peter Zattler
______________________________________________________________________