On Tue, Jul 28, 2009 at 9:17 AM, Jason Wang<wangqingpei(a)gmail.com> wrote:
the attach file is the whole log
On Tue, Jul 28, 2009 at 7:32 AM, Kevin O'Connor <kevin(a)koconnor.net> wrote:
> On Mon, Jul 27, 2009 at 11:42:18PM +0800, Jason Wang wrote:
> > Hi all,
> > Since DBM690T does not have UHCI controller, i bought an PCI-USB card
> > which contained two UHCI controller.
It seems your card(surely) has a single UHCI controller, but (maybe) 2
USB ports(I say based on you log output).
> > But It always caused rebooting when
> > the
> > option rom try to initialize the controller. I attached all of the
> > messages,
> > and looking for some help.
I feel it`s stranger to not see any message during the UHCI
initialization, but reboot is normal, if the option ROM don`t do
anything it will fallback to BIOS. I mean by "don`t do anything" if it
doesn`t load the boot sector and/or start executing something when it
finishes the Host Controller initialization.
Your log makes me think you don`t have a MSC device attached to any of
the ports. So I have attached a patch to see if the Root Hub
initialization has successfully finished, could you apply the attached
patch to libpayload and show the output?
Until now my doubt is the real bus/dev/func is
06/05/01, but while
search it as 00/05/01.
Please post a log with the seabios debug level set to 6.
(°= Leandro Dorileo
//\ ldorileo(a)gmail.com - http://www.dorilex.net
V_/ Software is a matter of freedom.