21 Oct
2009
21 Oct
'09
6:32 p.m.
Attached is a patch that contains the extra debug statements I added. Below is the new output:
before scan bus of PCI: 00:18.0 In scan bus of PCI: 00:18.0
--
Hugh Greenberg
Myles Watson wrote:
>
>
> On Wed, Oct 21, 2009 at 9:31 AM, Hugh Greenberg <hng@lanl.gov
> mailto:hng@lanl.gov> wrote:
>
>
> PCI: 00:1f.0, bad id 0xffffffff
> POST: 0x25
> scan bus of PCI: 00:18.0
>
> While we're doing this part only the last few lines (or the new lines
> since the last time) really matter.
>
> It looks like it gets stuck in scan_bus. Try adding print statements
> 1. after scan_bus just in case.
> 2. inside scan_bus in src/devices/device.c
>
> Print out which functions are being called and we'll narrow this down.
>
> When I get back to the lab I can start comparing to SimNOW again.
>
> Thanks,
> Myles