Hi,

I also tried

- config_intel_harcuvar config

- Built complete image with Intel flash image tool

Still not able to see anything on UART. Please some one help with some pointers here.

Thanks,

Tirumalesh.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, February 1, 2021 12:02 PM, Tirumalesh via coreboot <coreboot@coreboot.org> wrote:

Hi,

I am trying to boot Coreboot on Intel Harcuvar CRB.

The steps I tried
-> make menuconfig
selected Intel->Harcuvar
->make (got coreboot.rom 16MB)

-> split –b 8M –a 1 –d coreboot.rom coreboot
with dediprog programmed last 8M with coreboot1 (file generated with Split)

Not able to see any output on UART. please let me know if Sam missing any configs/steps here.
Any help is greatly appreciated.

Thanks,
Tirumalesh.