Knut Kujat escribió:

Myles Watson escribió:

do_pci_scan_bridge returns max 1
do_pci_scan_bridge for PCI: 00:02.0
PCI: pci_scan_bus for bus 02
POST: 0x24
malloc Enter, size 1092, free_mem_ptr 0014bffc
Error! malloc: Out of memory (free_mem_ptr >= free_mem_end_ptr)POST: 0xff

Try increasing the heap size in Kconfig.

Thanks,
Myles

Morning :)

Yip pushing the heap size to 0x40000 made the difference. But it still not booting :( Now it stucks at:
POST: 0x88
Enabling resources...
PCI: 00:18.0 cmd <- 00
PCI: 00:00.0 subsystem <- 00/00
PCI: 00:00.0 cmd <- 06
PCI: 00:00.1 cmd <- 06
PCI: 00:00.2 cmd <- 06
PCI: 00:00.3 cmd <- 06
PCI: 00:00.4 cmd <- 06
PCI: 00:00.5 cmd <- 06
PCI: 00:00.7 cmd <- 06
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 07
PCI: 00:02.0 bridge ctrl <- 000b
PCI: 00:02.0 cmd <- 07 <<<< Here it just stops and does nothing!

according to lspci PCI: 00:02.0 is the K8T890 PCI to PCI Bridge Controller. Any hints?

Hi again,

It solves itself don't know how?! I just cleaned up some printfs recompiled and it started working till:
POST: 0x89
Initializing CBMEM area to 0x7fff0000 (65536 bytes)
Adding CBMEM entry as no. 1
Moving GDT to 7fff0200...ok
High Tables Base is 7fff0000.
POST: 0x9c
Adding CBMEM entry as no. 2
ACPI: Writing ACPI tables at 7fff0400...
ACPI:     * FACS
ACPI:     * DSDT @ 7fff0508 Length 44e
ACPI:     * FADT
ACPI: added table 1/32 Length now 40
ACPI:    * MADT
ACPI: added table 2/32 Length now 44
ACPI:    * MCFG
PCI: 00:00.5 missing resource: 61
POST: 0xff

POST: 0xff is a bad thing right? So how do I fix this?

THX,
Knut Kujat