I just noticed I've attached the old version of the schematic. Thus
a freshly generated schema.
Oliver
On 03/22/12 01:58, Oliver Schinagl wrote:
On
03/21/12 04:42, Peter Stuge wrote:
Oliver Schinagl wrote:
I've attached a more or less 'complete'
render
Please just send the .pcb so that I can open it. Also, the
schematic
is not very clear.
//Peter
I've attached the .pcb and a more clear version of the schematic.
I was just dabbling with geda's schematic editor and first wired
everything together. It got very messy so decided to just put the
net definitions directly on the pins. This is still the case, but
with proper input/output markers hopefully.
Oliver