[ 0.000000] Linux version 2.6.20.1 (root@neuromancer) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #5 SMP PREEMPT Tue Mar 6 18:51:53 EST 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000001000 size: 000000000009f000 end: 00000000000a0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 00000000000c0000 size: 0000000000030000 end: 00000000000f0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() lies in range... [ 0.000000] copy_e820_map() end <= 0x100000ULL [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007ff00000 end: 0000000080000000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] 1152MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 00000010 [ 0.000000] Entering add_active_range(0, 0, 524288) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524288 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524288 [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2304 pages used for memmap [ 0.000000] HighMem zone: 292608 pages, LIFO batch:31 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: Unable to locate RSDP [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: GIGABYTE Product ID: M57SLI APIC at: 0xFEE00000 [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] I/O APIC #2 Version 17 at 0xF6144000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) [ 0.000000] Detected 2000.008 MHz processor. [ 29.098708] Built 1 zonelists. Total pages: 520192 [ 29.098710] Kernel command line: root=/dev/sda1 ro acpi_use_timer_override console=tty0 console=ttyS0,115200 [ 29.098864] mapped APIC to ffffd000 (fee00000) [ 29.098866] mapped IOAPIC to ffffc000 (f6144000) [ 29.098868] Enabling fast FPU save and restore... done. [ 29.098870] Enabling unmasked SIMD FPU exception support... done. [ 29.098876] Initializing CPU#0 [ 29.098930] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 29.100284] Console: colour VGA+ 80x25 [ 29.319567] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.326967] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.387287] Memory: 2074536k/2097152k available (2580k kernel code, 21460k reserved, 831k data, 352k init, 1179648k highmem) [ 29.398535] virtual kernel memory layout: [ 29.398536] fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) [ 29.398537] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 29.398538] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 29.398539] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 29.398541] .init : 0xc045c000 - 0xc04b4000 ( 352 kB) [ 29.398542] .data : 0xc0385191 - 0xc0454f30 ( 831 kB) [ 29.398543] .text : 0xc0100000 - 0xc0385191 (2580 kB) [ 29.442976] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.530117] Calibrating delay using timer specific routine.. 4003.22 BogoMIPS (lpj=8006442) [ 29.538580] Security Framework v1.0.0 initialized [ 29.543324] SELinux: Disabled at boot. [ 29.547205] Mount-cache hash table entries: 512 [ 29.551852] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 29.551859] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.559023] CPU: L2 Cache: 512K (64 bytes/line) [ 29.563587] CPU 0(2) -> Core 0 [ 29.566682] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 29.566690] Compat vDSO mapped to ffffe000. [ 29.570911] Checking 'hlt' instruction... OK. [ 29.590603] Freeing SMP alternatives: 12k freed [ 29.595187] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 29.602384] Booting processor 1/1 eip 2000 [ 29.616677] Initializing CPU#1 [ 29.693805] Calibrating delay using timer specific routine.. 4000.28 BogoMIPS (lpj=8000576) [ 29.693811] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 29.693817] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.693819] CPU: L2 Cache: 512K (64 bytes/line) [ 29.693821] CPU 1(2) -> Core 1 [ 29.693822] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 29.693940] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 29.727398] Total of 2 processors activated (8003.50 BogoMIPS). [ 29.733486] ENABLING IO-APIC IRQs [ 29.737039] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 29.889444] checking TSC synchronization across 2 CPUs: passed. [ 0.002822] Brought up 2 CPUs [ 0.031100] migration_cost=181 [ 0.034550] NET: Registered protocol family 16 [ 0.039091] EISA bus registered [ 0.042625] PCI: Using configuration type 1 [ 0.046838] Setting up standard PCI resources [ 0.051954] ACPI: Interpreter disabled. [ 0.055829] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.061522] pnp: PnP ACPI: disabled [ 0.065046] PnPBIOS: Scanning system for PnP BIOS support... [ 0.070751] PnPBIOS: PnP BIOS support was not detected. [ 0.076097] SCSI subsystem initialized [ 0.079903] libata version 2.00 loaded. [ 0.079920] PCI: Probing PCI hardware [ 0.083618] PCI: Probing PCI hardware (bus 00) [ 0.084234] Boot video device is 0000:02:00.0 [ 0.084315] PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0 [ 0.091630] PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0 [ 0.098958] PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0 [ 0.106261] PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0 [ 0.113561] PCI: Unable to handle 64-bit address space for bridge 0000:00:0f.0 [ 0.121461] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0 [ 0.127941] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 [ 0.133808] PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10 [ 0.139668] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22 [ 0.145533] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23 [ 0.151396] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20 [ 0.157261] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23 [ 0.163126] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21 [ 0.168991] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23 [ 0.174855] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 [ 0.180723] PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16 [ 0.186820] PCI: Bridge: 0000:00:06.0 [ 0.190518] IO window: disabled. [ 0.193952] MEM window: disabled. [ 0.197483] PREFETCH window: disabled. [ 0.201447] PCI: Bridge: 0000:00:0a.0 [ 0.205146] IO window: 1000-1fff [ 0.208580] MEM window: f4000000-f60fffff [ 0.212792] PREFETCH window: e0000000-efffffff [ 0.217446] PCI: Bridge: 0000:00:0b.0 [ 0.221147] IO window: disabled. [ 0.224580] MEM window: disabled. [ 0.228101] PREFETCH window: disabled. [ 0.232915] PCI: Bridge: 0000:00:0c.0 [ 0.236611] IO window: disabled. [ 0.240046] MEM window: disabled. [ 0.243567] PREFETCH window: disabled. [ 0.247519] PCI: Bridge: 0000:00:0d.0 [ 0.251213] IO window: disabled. [ 0.254647] MEM window: disabled. [ 0.258166] PREFETCH window: disabled. [ 0.262121] PCI: Bridge: 0000:00:0e.0 [ 0.265812] IO window: disabled. [ 0.269247] MEM window: disabled. [ 0.272769] PREFETCH window: disabled. [ 0.276721] PCI: Bridge: 0000:00:0f.0 [ 0.280415] IO window: disabled. [ 0.283848] MEM window: disabled. [ 0.287369] PREFETCH window: disabled. [ 0.291331] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.291338] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.291344] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.291350] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.291356] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.291362] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.291367] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.291406] NET: Registered protocol family 2 [ 0.330229] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.337501] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.345669] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.352691] TCP: Hash tables configured (established 131072 bind 65536) [ 0.359331] TCP reno registered [ 0.768000] audit: initializing netlink socket (disabled) [ 0.772000] audit(1186249525.956:1): initialized [ 0.776000] highmem bounce pool size: 64 pages [ 0.780000] VFS: Disk quotas dquot_6.5.1 [ 0.784000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.792000] io scheduler noop registered [ 0.796000] io scheduler anticipatory registered (default) [ 0.800000] io scheduler deadline registered [ 0.804000] io scheduler cfq registered [ 0.808000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.808000] assign_interrupt_mode Found MSI capability [ 0.816000] Allocate Port Service[0000:00:0a.0:pcie00] [ 0.816000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.816000] assign_interrupt_mode Found MSI capability [ 0.820000] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.820000] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.820000] assign_interrupt_mode Found MSI capability [ 0.824000] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.824000] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.824000] assign_interrupt_mode Found MSI capability [ 0.832000] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.832000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.832000] assign_interrupt_mode Found MSI capability [ 0.836000] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.836000] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.836000] assign_interrupt_mode Found MSI capability [ 0.840000] Allocate Port Service[0000:00:0f.0:pcie00] [ 0.840000] isapnp: Scanning for PnP cards... [ 1.200000] isapnp: No Plug & Play device found [ 1.224000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.232000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.236000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.244000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 1.252000] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 1.252000] forcedeth: using HIGHDMA [ 1.780000] eth0: forcedeth.c: subsystem: 01458:2b80 bound to 0000:00:08.0 [ 1.784000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.792000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.800000] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 1.804000] NFORCE-MCP55: chipset revision 161 [ 1.812000] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 1.816000] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 1.824000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 1.824000] ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio [ 1.832000] Probing IDE interface ide0... [ 2.236000] hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive [ 2.916000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.920000] Probing IDE interface ide1... [ 3.488000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) [ 3.496000] Uniform CD-ROM driver Revision: 3.20 [ 3.520000] sata_nv 0000:00:05.0: version 3.2 [ 3.520000] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 3.520000] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq 20 [ 3.524000] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq 20 [ 3.532000] scsi0 : sata_nv [ 4.004000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.020000] ata1.00: ATA-7, max UDMA/100, 488397168 sectors: LBA48 NCQ (depth 0/32) [ 4.028000] ata1.00: ata1: dev 0 multi count 0 [ 4.044000] ata1.00: configured for UDMA/100 [ 4.052000] scsi1 : sata_nv [ 4.364000] ata2: SATA link down (SStatus 0 SControl 300) [ 4.380000] ATA: abnormal status 0x7F on port 0x3017 [ 4.388000] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5 [ 4.396000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 4.400000] sda: Write Protect is off [ 4.404000] sda: Mode Sense: 00 3a 00 00 [ 4.404000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.416000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 4.420000] sda: Write Protect is off [ 4.424000] sda: Mode Sense: 00 3a 00 00 [ 4.424000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.432000] sda: sda1 sda2 < sda5 > [ 4.476000] sd 0:0:0:0: Attached scsi disk sda [ 4.480000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.484000] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 4.484000] ata3: SATA max UDMA/133 cmd 0x3020 ctl 0x3092 bmdma 0x2CE0 irq 23 [ 4.492000] ata4: SATA max UDMA/133 cmd 0x3030 ctl 0x30A2 bmdma 0x2CE8 irq 23 [ 4.500000] scsi2 : sata_nv [ 4.816000] ata3: SATA link down (SStatus 0 SControl 300) [ 4.832000] ATA: abnormal status 0x7F on port 0x3027 [ 4.840000] scsi3 : sata_nv [ 5.152000] ata4: SATA link down (SStatus 0 SControl 300) [ 5.168000] ATA: abnormal status 0x7F on port 0x3037 [ 5.176000] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 5.176000] ata5: SATA max UDMA/133 cmd 0x3040 ctl 0x30B2 bmdma 0x2CF0 irq 21 [ 5.180000] ata6: SATA max UDMA/133 cmd 0x3050 ctl 0x30C2 bmdma 0x2CF8 irq 21 [ 5.188000] scsi4 : sata_nv [ 5.504000] ata5: SATA link down (SStatus 0 SControl 300) [ 5.520000] ATA: abnormal status 0x7F on port 0x3047 [ 5.528000] scsi5 : sata_nv [ 5.840000] ata6: SATA link down (SStatus 0 SControl 300) [ 5.856000] ATA: abnormal status 0x7F on port 0x3057 [ 5.864000] PNP: No PS/2 controller found. Probing ports directly. [ 5.868000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.872000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.876000] mice: PS/2 mouse device common for all mice [ 5.900000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 5.908000] md: raid1 personality registered for level 1 [ 5.912000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 5.916000] EISA: Probing bus 0 at eisa.0 [ 5.920000] Cannot allocate resource for EISA slot 1 [ 5.924000] Cannot allocate resource for EISA slot 2 [ 5.928000] Cannot allocate resource for EISA slot 3 [ 5.932000] EISA: Detected 0 cards. [ 5.936000] TCP cubic registered [ 5.940000] NET: Registered protocol family 1 [ 5.944000] NET: Registered protocol family 8 [ 5.948000] NET: Registered protocol family 20 [ 5.952000] Starting balanced_irq [ 5.956000] Using IPI Shortcut mode [ 6.616000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 [ 6.688000] md: Autodetecting RAID arrays. [ 6.692000] md: autorun ... [ 6.696000] md: ... autorun DONE. [ 6.716000] kjournald starting. Commit interval 5 seconds [ 6.720000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.724000] VFS: Mounted root (ext3 filesystem) readonly. [ 6.728000] Freeing unused kernel memory: 352k freed [ 12.772000] NET: Registered protocol family 10 [ 12.776000] lo: Disabled Privacy Extensions [ 13.216000] usbcore: registered new interface driver usbfs [ 13.220000] usbcore: registered new interface driver hub [ 13.224000] usbcore: registered new device driver usb [ 13.328000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.340000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.376000] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 13.376000] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 13.384000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 13.388000] ehci_hcd 0000:00:02.1: debug port 1 [ 13.392000] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 13.392000] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf614a000 [ 13.396000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 13.404000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.412000] usb usb1: configuration #1 chosen from 1 choice [ 13.416000] hub 1-0:1.0: USB hub found [ 13.420000] hub 1-0:1.0: 10 ports detected [ 13.436000] input: PC Speaker as /class/input/input2 [ 13.528000] i2c_adapter i2c-0: adapter [SMBus nForce2 adapter at 2c40] registered [ 13.528000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2c40 [ 13.532000] i2c_adapter i2c-1: adapter [SMBus nForce2 adapter at 2c80] registered [ 13.532000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2c80 [ 13.536000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 13.536000] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 13.544000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 13.552000] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6145000 [ 13.616000] usb usb2: configuration #1 chosen from 1 choice [ 13.620000] hub 2-0:1.0: USB hub found [ 13.628000] hub 2-0:1.0: 10 ports detected [ 13.844000] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 14.052000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 14.432000] Intel ISA PCIC probe: not found. [ 14.536000] Intel ISA PCIC probe: not found. [ 14.580000] ieee1394: Initialized config rom entry `ip1394' [ 14.656000] Adding 6080560k swap on /dev/sda5. Priority:-1 extents:1 across:6080560k [ 14.708000] EXT3 FS on sda1, internal journal [ 17.384000] NET: Registered protocol family 17 [ 21.928000] powernow_k8: Unknown symbol acpi_processor_notify_smm [ 21.928000] powernow_k8: Unknown symbol acpi_processor_unregister_performance [ 21.928000] powernow_k8: Unknown symbol acpi_processor_register_performance [ 21.956000] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 21.956000] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 21.956000] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 21.956000] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 23.472000] eth0: no IPv6 routers present [ 24.848000] apm: BIOS not found. [ 27.608000] Bluetooth: Core ver 2.11 [ 27.608000] NET: Registered protocol family 31 [ 27.612000] Bluetooth: HCI device and connection manager initialized [ 27.616000] Bluetooth: HCI socket layer initialized [ 27.656000] Bluetooth: L2CAP ver 2.8 [ 27.660000] Bluetooth: L2CAP socket layer initialized [ 27.712000] Bluetooth: RFCOMM socket layer initialized [ 27.716000] Bluetooth: RFCOMM TTY layer initialized [ 27.720000] Bluetooth: RFCOMM ver 1.8