RE: How to use Filo as a payload ?

[Peter Fox]

I don't think so. It is the 486 core in an stpc elite.
It just claims Industry standard 486 compatibility.

In their published instruction set summary, which
appears to be in alphabetical order, there is
RCR, then REP INS.

-- 
Peter Fox <[e-mail]>     Aeroflex Test Solutions
Principal Design Engineer                            Stevenage
Any opinions expressed above are      http://www.aeroflex.com/
not necessarily those of Aeroflex.   Tel: + 44 (0) 1438 742200

  -----Original Message-----
  From: Takeshi Sone [mailto:[e-mail]]
  Sent: 10 November 2003 12:27
  To: Peter Fox
  Cc: Linuxbios
  Subject: Re: How to use Filo as a payload ?
  
  
  On Mon, Nov 10, 2003 at 12:16:11PM -0000, Peter Fox wrote:
> relocate: Current location: 0x100000-0x123fdf
> relocate: Relocating to 0x1fdc020-0x1ffffff... ok
>
> LinuxBIOS-1.0.0 Mon Nov 10 12:08:12 GMT 2003 starting...
> Copying LinuxBIOS to ram.

Does your CPU have RDTSC instruction?
  FILO uses it for timing.
  
  -- 
  Takeshi