On 05.03.2008 18:13, Marc Jones wrote:
ron minnich wrote:
One thing I plan to change pretty soon: power button control can move from stage1 to stage2, and power button control will be managed in dts (another dts setting we would NOT want visible in Kconfig; you could render a board totally unbootable and unrepairable with the wrong setting. Kconfig should be for settings that are safe to change).
This would be great. It should be easy to add a dts item and call cs5536_setup_power_button or not. Moving it to stage 2 should be fine BUT until the power button is setup it won't work. Some people might not like that if you hang or delay somewhere prior to it being setup.
Can we set up the power button in a way that makes it work always, then change the setup in stage2?
msr = rdmsr(GLCP_SYS_RSTPLL); if (msr.lo & (0x3f << 26)) { /* PLL is already set and we are reboot from PLL reset. */ return; } cs5536_setup_idsel();Need this to do stage2. Without it the 5536 won't decode PCI.
Did you mean stage1?
Regards, Carl-Daniel