Calibrating timer since microsleep sucks ... takes a second
Setting up microsecond timing loop
OK, calibrated, now do the deed
Trying Am29F040B, 512 KB
probe_29f040b: id1 0xff, id2 0xff
Trying At29C040A, 512 KB
probe_jedec: id1 0xff, id2 0xff
Trying Mx29f002, 256 KB
probe_29f002: id1 255, id2 255
Trying SST29EE020A, 256 KB
probe_jedec: id1 0xff, id2 0xff
Trying SST28SF040A, 512 KB
probe_28sf040: id1 0xff, id2 0xff
Trying SST39SF020A, 256 KB
probe_39sf020: id1 0xff, id2 0xff
Trying SST39VF020, 256 KB
probe_39sf020: id1 0xff, id2 0xff
Trying W29C011, 128 KB
probe_jedec: id1 0xff, id2 0xff
Trying W29C020C, 256 KB
probe_jedec: id1 0xff, id2 0xff
Trying W49F002U, 256 KB
probe_49f002: id1 0xff, id2 0xff
Trying M29F400BT, 512 KB
probe_m29f400bt: id1 0xff, id2 0xff
Trying 82802ab, 512 KB
probe_82802ab: id1 0xff, id2 0xff
Trying 82802ac, 1024 KB
probe_82802ab: id1 0xff, id2 0xff
Trying MD-2802 (M-Systems DiskOnChip Millennium Module), 8 KB
probe_md2802:
probe_md2802: *******************************
probe_md2802: * THIS IS A PRE ALPHA VERSION *
probe_md2802: * IN THE DEVELOPEMENT *********
probe_md2802: * PROCESS RIGHT NOW. **********
probe_md2802: *******************************
probe_md2802: * IF YOU ARE NOT A DEVELOPER **
probe_md2802: * THEN DO NOT TRY TO READ OR **
probe_md2802: * WRITE TO THIS DEVICE ********
probe_md2802: *******************************
probe_md2802:
probe_md2802: switching off reset mode ...
probe_md2802: switching off reset mode ... done
probe_md2802:
probe_md2802: switching off write protection ...
probe_md2802: switching off write protection ... done
probe_md2802:
probe_md2802: IPL_0x0000: 0xff
probe_md2802: IPL_0x0001: 0xff
probe_md2802: IPL_0x0002: 0xff
probe_md2802: IPL_0x0003: 0xff
probe_md2802:
probe_md2802: ChipID: 0xff
probe_md2802: DOCStatus: 0xff
probe_md2802: FloorSelect: 0xff
probe_md2802: CDSNControl: 0xff
probe_md2802: CDSNDeviceSelect: 0xff
probe_md2802: ECCConfiguration: 0xff
probe_md2802: CDSNSlowIO: 0xff
probe_md2802: ECCSyndrome0: 0xff
probe_md2802: ECCSyndrome1: 0xff
probe_md2802: ECCSyndrome2: 0xff
probe_md2802: ECCSyndrome3: 0xff
probe_md2802: ECCSyndrome4: 0xff
probe_md2802: ECCSyndrome5: 0xff
probe_md2802: AliasResolution: 0xff
probe_md2802: ConfigurationInput: 0xff
probe_md2802: ReadPipelineInitialization: 0xff
probe_md2802: LastDataRead: 0xff
probe_md2802:
probe_md2802: checking ECCConfiguration toggle bit
probe_md2802: 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
probe_md2802: toggle result: 5/5
EEPROM not found