[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.5-gentoo (root@urd) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #8 SMP Mon Dec 12 22:01:19 CET 2011 [ 0.000000] Command line: BOOT_IMAGE=/kernel-3.1.5-gentoo root=/dev/sda3 ro video=uvesafb:1280x800-32,mtrr:3,ywrap console=ttyS0,115200 console=tty0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] BIOS-e820: 000000006fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: ASUS M4A78LT-M, BIOS 4.0-1914-g66ebaa9-dirty 12/19/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000070000000 mask FFFFF0000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000006fff0000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 006fe00000 page 2M [ 0.000000] 006fe00000 - 006fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 6fff0000 @ 1fffd000-20000000 [ 0.000000] ACPI: RSDP 00000000000fd960 00014 (v00 CORE ) [ 0.000000] ACPI: RSDT 000000006fff2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: HPET 000000006fff24c8 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC 000000006fff2500 0005C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SRAT 000000006fff2560 000A0 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SLIT 000000006fff2600 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SSDT 000000006fff2630 00635 (v01 AMD-FA AMD-ACPI 06040000 INTL 20110922) [ 0.000000] ACPI: FACP 000000006fff5638 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: DSDT 000000006fff2c68 0298C (v02 ASUS M4A78LT- 00010001 INTL 20110922) [ 0.000000] ACPI: FACS 000000006fff55f8 00040 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006fff0 [ 0.000000] On node 0 totalpages: 458623 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7104 pages used for memmap [ 0.000000] DMA32 zone: 447536 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x818 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] setup_percpu: NR_CPUS:5 nr_cpumask_bits:5 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006fc00000 s73280 r8192 d20928 u1048576 [ 0.000000] pcpu-alloc: s73280 r8192 d20928 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 451450 [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.1.5-gentoo root=/dev/sda3 ro video=uvesafb:1280x800-32,mtrr:3,ywrap console=ttyS0,115200 console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ dc000000 size 64 MB [ 0.000000] Memory: 1794872k/1834944k available (4299k kernel code, 452k absent, 39620k reserved, 1909k data, 572k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:416 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2907.439 MHz processor. [ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5814.87 BogoMIPS (lpj=2907439) [ 0.005002] pid_max: default: 32768 minimum: 301 [ 0.006041] Mount-cache hash table entries: 256 [ 0.007124] Initializing cgroup subsys cpuacct [ 0.008007] Initializing cgroup subsys devices [ 0.009002] Initializing cgroup subsys freezer [ 0.010019] tseg: 0000000000 [ 0.010026] CPU: Physical Processor ID: 0 [ 0.011002] CPU: Processor Core ID: 0 [ 0.012001] mce: CPU supports 6 MCE banks [ 0.013036] ACPI: Core revision 20110623 [ 0.016172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.027168] CPU0: AMD Athlon(tm) II X2 245e Processor stepping 03 [ 0.030997] Performance Events: AMD PMU driver. [ 0.031999] ... version: 0 [ 0.032998] ... bit width: 48 [ 0.033998] ... generic registers: 4 [ 0.034998] ... value mask: 0000ffffffffffff [ 0.035998] ... max period: 00007fffffffffff [ 0.036998] ... fixed-purpose events: 0 [ 0.037998] ... event mask: 000000000000000f [ 0.039095] MCE: In-kernel MCE decoding enabled. [ 0.040046] Booting Node 0, Processors #1 Ok. [ 0.041799] smpboot cpu 1: start_ip = 9a000 [ 0.112993] Brought up 2 CPUs [ 0.113991] Total of 2 processors activated (11629.04 BogoMIPS). [ 0.115340] RTC time: 17:38:02, date: 12/19/11 [ 0.120023] NET: Registered protocol family 16 [ 0.124018] node 0 link 0: io port [1000, 3fff] [ 0.124018] TOM: 0000000080000000 aka 2048M [ 0.128990] Fam 10h mmconf [e0000000, efffffff] [ 0.128992] node 0 link 0: mmio [d4000000, d83fffff] [ 0.128994] node 0 link 0: mmio [c0000000, d01fffff] [ 0.128996] bus: [00, 03] on node 0 link 0 [ 0.128998] bus: 00 index 0 [io 0x0000-0xffff] [ 0.128999] bus: 00 index 1 [mem 0xd0200000-0xdfffffff] [ 0.129001] bus: 00 index 2 [mem 0x80000000-0xd01fffff] [ 0.129002] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.129015] Extended Config Space enabled on 1 nodes [ 0.134015] ACPI: bus type pci registered [ 0.138013] PCI: Using configuration type 1 for base access [ 0.142989] PCI: Using configuration type 1 for extended access [ 0.148999] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.154986] mtrr: probably your BIOS does not setup all CPUs. [ 0.160984] mtrr: corrected configuration. [ 0.167009] bio: create slab at 0 [ 0.172004] ACPI: Added _OSI(Module Device) [ 0.172984] ACPI: Added _OSI(Processor Device) [ 0.173983] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.174983] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177230] ACPI: EC: Look up EC in DSDT [ 0.177631] ACPI: Executed 2 blocks of module-level executable AML code [ 0.180569] ACPI: Interpreter enabled [ 0.180983] ACPI: (supports S0 S1 S2 S3 S5) [ 0.183266] ACPI: BIOS offers _BFS [ 0.183981] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org [ 0.184981] ACPI: Using IOAPIC for interrupt routing [ 0.191024] ACPI: Power Resource [PFN0] (on) [ 0.192031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193057] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.195980] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536) [ 0.200982] [Firmware Bug]: ACPI: no secondary bus range in _CRS [ 0.201984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.203025] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.206978] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536) [ 0.211997] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.212081] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.212993] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.213044] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.213047] pci 0000:00:0a.0: PME# disabled [ 0.213088] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.213115] pci 0000:00:11.0: reg 10: [io 0x3020-0x3027] [ 0.213128] pci 0000:00:11.0: reg 14: [io 0x3040-0x3043] [ 0.213141] pci 0000:00:11.0: reg 18: [io 0x3028-0x302f] [ 0.213154] pci 0000:00:11.0: reg 1c: [io 0x3044-0x3047] [ 0.213167] pci 0000:00:11.0: reg 20: [io 0x3000-0x300f] [ 0.213180] pci 0000:00:11.0: reg 24: [mem 0xd8309000-0xd83093ff] [ 0.213208] pci 0000:00:11.0: set SATA to AHCI mode [ 0.214028] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.214046] pci 0000:00:12.0: reg 10: [mem 0xd8304000-0xd8304fff] [ 0.214133] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.214151] pci 0000:00:12.1: reg 10: [mem 0xd8305000-0xd8305fff] [ 0.214247] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.214273] pci 0000:00:12.2: reg 10: [mem 0xd8309400-0xd83094ff] [ 0.214372] pci 0000:00:12.2: supports D1 D2 [ 0.214374] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.214378] pci 0000:00:12.2: PME# disabled [ 0.214406] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.214424] pci 0000:00:13.0: reg 10: [mem 0xd8306000-0xd8306fff] [ 0.214512] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.214530] pci 0000:00:13.1: reg 10: [mem 0xd8307000-0xd8307fff] [ 0.214625] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.214651] pci 0000:00:13.2: reg 10: [mem 0xd8309500-0xd83095ff] [ 0.214750] pci 0000:00:13.2: supports D1 D2 [ 0.214751] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.214756] pci 0000:00:13.2: PME# disabled [ 0.214788] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.215014] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.215032] pci 0000:00:14.1: reg 10: [io 0x3030-0x3037] [ 0.215045] pci 0000:00:14.1: reg 14: [io 0x3048-0x304b] [ 0.215057] pci 0000:00:14.1: reg 18: [io 0x3038-0x303f] [ 0.215070] pci 0000:00:14.1: reg 1c: [io 0x304c-0x304f] [ 0.215083] pci 0000:00:14.1: reg 20: [io 0x3010-0x301f] [ 0.215133] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.215162] pci 0000:00:14.2: reg 10: [mem 0xd8300000-0xd8303fff 64bit] [ 0.215243] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.215248] pci 0000:00:14.2: PME# disabled [ 0.215264] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.215367] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.215422] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.215440] pci 0000:00:14.5: reg 10: [mem 0xd8308000-0xd8308fff] [ 0.215531] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.215542] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.215552] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.215562] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.215575] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.215638] pci 0000:01:05.0: [1002:9616] type 0 class 0x000300 [ 0.215654] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.215663] pci 0000:01:05.0: reg 14: [io 0x1000-0x10ff] [ 0.215671] pci 0000:01:05.0: reg 18: [mem 0xd8100000-0xd810ffff] [ 0.215692] pci 0000:01:05.0: reg 24: [mem 0xd8000000-0xd80fffff] [ 0.215718] pci 0000:01:05.0: supports D1 D2 [ 0.215737] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403 [ 0.215753] pci 0000:01:05.1: reg 10: [mem 0xd8110000-0xd8113fff] [ 0.215812] pci 0000:01:05.1: supports D1 D2 [ 0.215868] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.215980] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.215984] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd81fffff] [ 0.215989] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.216053] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.216071] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.216100] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.216119] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.216132] pci 0000:02:00.0: reg 30: [mem 0xd8200000-0xd820ffff pref] [ 0.216172] pci 0000:02:00.0: supports D1 D2 [ 0.216174] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216178] pci 0000:02:00.0: PME# disabled [ 0.217989] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.218980] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff] [ 0.218984] pci 0000:00:0a.0: bridge window [mem 0xd8200000-0xd82fffff] [ 0.218989] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.219026] pci 0000:03:06.0: [1822:4e35] type 0 class 0x000480 [ 0.219047] pci 0000:03:06.0: reg 10: [mem 0xd0100000-0xd0100fff pref] [ 0.219193] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.219986] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd01fffff pref] [ 0.220003] pci_bus 0000:00: on NUMA node 0 [ 0.220005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.220052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.220071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBRA._PRT] [ 0.220088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.220141] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.220977] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.221976] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.226994] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.232002] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.237003] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.241999] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.247197] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.252195] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.255195] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.259191] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.263184] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.263971] vgaarb: loaded [ 0.264969] vgaarb: bridge control possible 0000:01:05.0 [ 0.266016] SCSI subsystem initialized [ 0.266984] libata version 3.00 loaded. [ 0.266987] PCI: Using ACPI for IRQ routing [ 0.267974] PCI: pci_cache_line_size set to 64 bytes [ 0.267977] pci 0000:00:01.0: no compatible bridge window for [io 0x1000-0x1fff] [ 0.268969] pci 0000:00:01.0: no compatible bridge window for [mem 0xd8000000-0xd81fffff] [ 0.269969] pci 0000:00:01.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.270969] pci 0000:00:0a.0: no compatible bridge window for [io 0x2000-0x2fff] [ 0.271969] pci 0000:00:0a.0: no compatible bridge window for [mem 0xd8200000-0xd82fffff] [ 0.272969] pci 0000:00:0a.0: no compatible bridge window for [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.273968] pci 0000:00:14.4: no compatible bridge window for [mem 0xd0100000-0xd01fffff pref] [ 0.274975] pci 0000:00:11.0: no compatible bridge window for [io 0x3020-0x3027] [ 0.275975] pci 0000:00:11.0: no compatible bridge window for [io 0x3040-0x3043] [ 0.276968] pci 0000:00:11.0: no compatible bridge window for [io 0x3028-0x302f] [ 0.277968] pci 0000:00:11.0: no compatible bridge window for [io 0x3044-0x3047] [ 0.278967] pci 0000:00:11.0: no compatible bridge window for [io 0x3000-0x300f] [ 0.279968] pci 0000:00:11.0: no compatible bridge window for [mem 0xd8309000-0xd83093ff] [ 0.280970] pci 0000:00:12.0: no compatible bridge window for [mem 0xd8304000-0xd8304fff] [ 0.281970] pci 0000:00:12.1: no compatible bridge window for [mem 0xd8305000-0xd8305fff] [ 0.282969] pci 0000:00:12.2: no compatible bridge window for [mem 0xd8309400-0xd83094ff] [ 0.283969] pci 0000:00:13.0: no compatible bridge window for [mem 0xd8306000-0xd8306fff] [ 0.284969] pci 0000:00:13.1: no compatible bridge window for [mem 0xd8307000-0xd8307fff] [ 0.285969] pci 0000:00:13.2: no compatible bridge window for [mem 0xd8309500-0xd83095ff] [ 0.286970] pci 0000:00:14.1: no compatible bridge window for [io 0x01f0-0x01f7] [ 0.287966] pci 0000:00:14.1: no compatible bridge window for [io 0x03f6] [ 0.288966] pci 0000:00:14.1: no compatible bridge window for [io 0x0170-0x0177] [ 0.289966] pci 0000:00:14.1: no compatible bridge window for [io 0x0376] [ 0.290966] pci 0000:00:14.1: no compatible bridge window for [io 0x3010-0x301f] [ 0.291968] pci 0000:00:14.2: no compatible bridge window for [mem 0xd8300000-0xd8303fff 64bit] [ 0.292972] pci 0000:00:14.5: no compatible bridge window for [mem 0xd8308000-0xd8308fff] [ 0.293970] pci 0000:01:05.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff pref] [ 0.294965] pci 0000:01:05.0: no compatible bridge window for [io 0x1000-0x10ff] [ 0.295965] pci 0000:01:05.0: no compatible bridge window for [mem 0xd8100000-0xd810ffff] [ 0.296965] pci 0000:01:05.0: no compatible bridge window for [mem 0xd8000000-0xd80fffff] [ 0.297966] pci 0000:01:05.1: no compatible bridge window for [mem 0xd8110000-0xd8113fff] [ 0.298966] pci 0000:02:00.0: no compatible bridge window for [io 0x2000-0x20ff] [ 0.299965] pci 0000:02:00.0: no compatible bridge window for [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.300964] pci 0000:02:00.0: no compatible bridge window for [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.301967] pci 0000:03:06.0: no compatible bridge window for [mem 0xd0100000-0xd0100fff pref] [ 0.303004] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.303006] reserve RAM buffer: 000000006fff0000 - 000000006fffffff [ 0.307003] pnp: PnP ACPI init [ 0.307987] ACPI: bus type pnp registered [ 0.309129] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.312962] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536) [ 0.317998] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.318052] pnp 00:01: [irq 8] [ 0.318053] pnp 00:01: [io 0x0070-0x0071] [ 0.318072] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.318072] pnp 00:02: [io 0x0061] [ 0.318072] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.318072] pnp 00:03: [dma 4] [ 0.318072] pnp 00:03: [io 0x0000-0x000f] [ 0.318072] pnp 00:03: [io 0x0081-0x0083] [ 0.318072] pnp 00:03: [io 0x0087] [ 0.318072] pnp 00:03: [io 0x0089-0x008b] [ 0.318072] pnp 00:03: [io 0x008f] [ 0.318072] pnp 00:03: [io 0x00c0-0x00df] [ 0.318978] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.318984] pnp 00:04: [io 0x00f0-0x00ff] [ 0.318991] pnp 00:04: [irq 13] [ 0.319010] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.319010] pnp 00:05: [mem 0xfed00000-0xfed003ff] [ 0.319010] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.319010] pnp: PnP ACPI: found 6 devices [ 0.319968] ACPI: ACPI bus type pnp unregistered [ 0.326398] Switching to clocksource acpi_pm [ 0.326983] pci 0000:02:00.0: no compatible bridge window for [mem 0xd8200000-0xd820ffff pref] [ 0.327386] Switched to NOHz mode on CPU #1 [ 0.339744] Switched to NOHz mode on CPU #0 [ 0.343943] PCI: max bus depth: 1 pci_try_num: 2 [ 0.343971] pci 0000:00:01.0: BAR 15: can't assign mem pref (size 0x10000000) [ 0.351096] pci 0000:00:01.0: BAR 14: can't assign mem (size 0x200000) [ 0.357613] pci 0000:00:0a.0: BAR 15: can't assign mem pref (size 0x100000) [ 0.364565] pci 0000:00:14.4: BAR 15: can't assign mem pref (size 0x100000) [ 0.371514] pci 0000:00:14.2: BAR 0: can't assign mem (size 0x4000) [ 0.377772] pci 0000:00:14.2: BAR 0: trying firmware assignment [mem 0xd8300000-0xd8303fff 64bit] [ 0.386625] pci 0000:00:14.2: BAR 0: assigned [mem 0xd8300000-0xd8303fff 64bit] [ 0.393935] pci 0000:00:14.2: BAR 0: set to [mem 0xd8300000-0xd8303fff 64bit] (PCI address [0xd8300000-0xd8303fff]) [ 0.404344] pci 0000:00:01.0: BAR 13: can't assign io (size 0x1000) [ 0.410602] pci 0000:00:0a.0: BAR 13: can't assign io (size 0x1000) [ 0.416860] pci 0000:00:12.0: BAR 0: can't assign mem (size 0x1000) [ 0.423117] pci 0000:00:12.0: BAR 0: trying firmware assignment [mem 0xd8304000-0xd8304fff] [ 0.431451] pci 0000:00:12.0: BAR 0: assigned [mem 0xd8304000-0xd8304fff] [ 0.438233] pci 0000:00:12.0: BAR 0: set to [mem 0xd8304000-0xd8304fff] (PCI address [0xd8304000-0xd8304fff]) [ 0.448128] pci 0000:00:12.1: BAR 0: can't assign mem (size 0x1000) [ 0.454385] pci 0000:00:12.1: BAR 0: trying firmware assignment [mem 0xd8305000-0xd8305fff] [ 0.462718] pci 0000:00:12.1: BAR 0: assigned [mem 0xd8305000-0xd8305fff] [ 0.469501] pci 0000:00:12.1: BAR 0: set to [mem 0xd8305000-0xd8305fff] (PCI address [0xd8305000-0xd8305fff]) [ 0.479394] pci 0000:00:13.0: BAR 0: can't assign mem (size 0x1000) [ 0.485652] pci 0000:00:13.0: BAR 0: trying firmware assignment [mem 0xd8306000-0xd8306fff] [ 0.493986] pci 0000:00:13.0: BAR 0: assigned [mem 0xd8306000-0xd8306fff] [ 0.500765] pci 0000:00:13.0: BAR 0: set to [mem 0xd8306000-0xd8306fff] (PCI address [0xd8306000-0xd8306fff]) [ 0.510662] pci 0000:00:13.1: BAR 0: can't assign mem (size 0x1000) [ 0.516919] pci 0000:00:13.1: BAR 0: trying firmware assignment [mem 0xd8307000-0xd8307fff] [ 0.525254] pci 0000:00:13.1: BAR 0: assigned [mem 0xd8307000-0xd8307fff] [ 0.532033] pci 0000:00:13.1: BAR 0: set to [mem 0xd8307000-0xd8307fff] (PCI address [0xd8307000-0xd8307fff]) [ 0.541929] pci 0000:00:14.5: BAR 0: can't assign mem (size 0x1000) [ 0.548187] pci 0000:00:14.5: BAR 0: trying firmware assignment [mem 0xd8308000-0xd8308fff] [ 0.556519] pci 0000:00:14.5: BAR 0: assigned [mem 0xd8308000-0xd8308fff] [ 0.563300] pci 0000:00:14.5: BAR 0: set to [mem 0xd8308000-0xd8308fff] (PCI address [0xd8308000-0xd8308fff]) [ 0.573193] pci 0000:00:11.0: BAR 5: can't assign mem (size 0x400) [ 0.579367] pci 0000:00:11.0: BAR 5: trying firmware assignment [mem 0xd8309000-0xd83093ff] [ 0.587700] pci 0000:00:11.0: BAR 5: assigned [mem 0xd8309000-0xd83093ff] [ 0.594482] pci 0000:00:11.0: BAR 5: set to [mem 0xd8309000-0xd83093ff] (PCI address [0xd8309000-0xd83093ff]) [ 0.604375] pci 0000:00:12.2: BAR 0: can't assign mem (size 0x100) [ 0.610548] pci 0000:00:12.2: BAR 0: trying firmware assignment [mem 0xd8309400-0xd83094ff] [ 0.618880] pci 0000:00:12.2: BAR 0: assigned [mem 0xd8309400-0xd83094ff] [ 0.625660] pci 0000:00:12.2: BAR 0: set to [mem 0xd8309400-0xd83094ff] (PCI address [0xd8309400-0xd83094ff]) [ 0.635554] pci 0000:00:13.2: BAR 0: can't assign mem (size 0x100) [ 0.641727] pci 0000:00:13.2: BAR 0: trying firmware assignment [mem 0xd8309500-0xd83095ff] [ 0.650060] pci 0000:00:13.2: BAR 0: assigned [mem 0xd8309500-0xd83095ff] [ 0.656842] pci 0000:00:13.2: BAR 0: set to [mem 0xd8309500-0xd83095ff] (PCI address [0xd8309500-0xd83095ff]) [ 0.666736] pci 0000:00:11.0: BAR 4: can't assign io (size 0x10) [ 0.672737] pci 0000:00:11.0: BAR 4: trying firmware assignment [io 0x3000-0x300f] [ 0.680388] pci 0000:00:11.0: BAR 4: assigned [io 0x3000-0x300f] [ 0.686474] pci 0000:00:11.0: BAR 4: set to [io 0x3000-0x300f] (PCI address [0x3000-0x300f]) [ 0.694985] pci 0000:00:14.1: BAR 4: can't assign io (size 0x10) [ 0.700986] pci 0000:00:14.1: BAR 4: trying firmware assignment [io 0x3010-0x301f] [ 0.708628] pci 0000:00:14.1: BAR 4: assigned [io 0x3010-0x301f] [ 0.714715] pci 0000:00:14.1: BAR 4: set to [io 0x3010-0x301f] (PCI address [0x3010-0x301f]) [ 0.723219] pci 0000:00:11.0: BAR 0: can't assign io (size 0x8) [ 0.729132] pci 0000:00:11.0: BAR 0: trying firmware assignment [io 0x3020-0x3027] [ 0.736774] pci 0000:00:11.0: BAR 0: assigned [io 0x3020-0x3027] [ 0.742862] pci 0000:00:11.0: BAR 0: set to [io 0x3020-0x3027] (PCI address [0x3020-0x3027]) [ 0.751375] pci 0000:00:11.0: BAR 2: can't assign io (size 0x8) [ 0.757285] pci 0000:00:11.0: BAR 2: trying firmware assignment [io 0x3028-0x302f] [ 0.764929] pci 0000:00:11.0: BAR 2: assigned [io 0x3028-0x302f] [ 0.771018] pci 0000:00:11.0: BAR 2: set to [io 0x3028-0x302f] (PCI address [0x3028-0x302f]) [ 0.779530] pci 0000:00:11.0: BAR 1: can't assign io (size 0x4) [ 0.785441] pci 0000:00:11.0: BAR 1: trying firmware assignment [io 0x3040-0x3043] [ 0.793083] pci 0000:00:11.0: BAR 1: assigned [io 0x3040-0x3043] [ 0.799171] pci 0000:00:11.0: BAR 1: set to [io 0x3040-0x3043] (PCI address [0x3040-0x3043]) [ 0.807674] pci 0000:00:11.0: BAR 3: can't assign io (size 0x4) [ 0.813588] pci 0000:00:11.0: BAR 3: trying firmware assignment [io 0x3044-0x3047] [ 0.821230] pci 0000:00:11.0: BAR 3: assigned [io 0x3044-0x3047] [ 0.827318] pci 0000:00:11.0: BAR 3: set to [io 0x3044-0x3047] (PCI address [0x3044-0x3047]) [ 0.835832] pci 0000:01:05.0: BAR 0: can't assign mem pref (size 0x10000000) [ 0.842869] pci 0000:01:05.0: BAR 0: trying firmware assignment [mem 0xc0000000-0xcfffffff pref] [ 0.851632] pci 0000:01:05.0: BAR 0: assigned [mem 0xc0000000-0xcfffffff pref] [ 0.858845] pci 0000:01:05.0: BAR 0: set to [mem 0xc0000000-0xcfffffff pref] (PCI address [0xc0000000-0xcfffffff]) [ 0.869171] pci 0000:01:05.0: BAR 5: can't assign mem (size 0x100000) [ 0.875606] pci 0000:01:05.0: BAR 5: trying firmware assignment [mem 0xd8000000-0xd80fffff] [ 0.883936] pci 0000:01:05.0: BAR 5: assigned [mem 0xd8000000-0xd80fffff] [ 0.890715] pci 0000:01:05.0: BAR 5: set to [mem 0xd8000000-0xd80fffff] (PCI address [0xd8000000-0xd80fffff]) [ 0.900605] pci 0000:01:05.0: BAR 2: can't assign mem (size 0x10000) [ 0.906951] pci 0000:01:05.0: BAR 2: trying firmware assignment [mem 0xd8100000-0xd810ffff] [ 0.915290] pci 0000:01:05.0: BAR 2: assigned [mem 0xd8100000-0xd810ffff] [ 0.922069] pci 0000:01:05.0: BAR 2: set to [mem 0xd8100000-0xd810ffff] (PCI address [0xd8100000-0xd810ffff]) [ 0.931958] pci 0000:01:05.1: BAR 0: can't assign mem (size 0x4000) [ 0.938218] pci 0000:01:05.1: BAR 0: trying firmware assignment [mem 0xd8110000-0xd8113fff] [ 0.946557] pci 0000:01:05.1: BAR 0: assigned [mem 0xd8110000-0xd8113fff] [ 0.953338] pci 0000:01:05.1: BAR 0: set to [mem 0xd8110000-0xd8113fff] (PCI address [0xd8110000-0xd8113fff]) [ 0.963234] pci 0000:01:05.0: BAR 1: can't assign io (size 0x100) [ 0.969320] pci 0000:01:05.0: BAR 1: trying firmware assignment [io 0x1000-0x10ff] [ 0.976960] pci 0000:01:05.0: BAR 1: assigned [io 0x1000-0x10ff] [ 0.983049] pci 0000:01:05.0: BAR 1: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff]) [ 0.991562] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.996791] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x10000) [ 1.003571] pci 0000:02:00.0: BAR 4: can't assign mem pref (size 0x4000) [ 1.010271] pci 0000:02:00.0: BAR 4: trying firmware assignment [mem 0xd0000000-0xd0003fff 64bit pref] [ 1.019559] pci 0000:02:00.0: BAR 4: assigned [mem 0xd0000000-0xd0003fff 64bit pref] [ 1.027296] pci 0000:02:00.0: BAR 4: set to [mem 0xd0000000-0xd0003fff 64bit pref] (PCI address [0xd0000000-0xd0003fff]) [ 1.038137] pci 0000:02:00.0: BAR 2: can't assign mem pref (size 0x1000) [ 1.044827] pci 0000:02:00.0: BAR 2: trying firmware assignment [mem 0xd0004000-0xd0004fff 64bit pref] [ 1.054114] pci 0000:02:00.0: BAR 2: assigned [mem 0xd0004000-0xd0004fff 64bit pref] [ 1.061847] pci 0000:02:00.0: BAR 2: set to [mem 0xd0004000-0xd0004fff 64bit pref] (PCI address [0xd0004000-0xd0004fff]) [ 1.072689] pci 0000:02:00.0: BAR 0: can't assign io (size 0x100) [ 1.078774] pci 0000:02:00.0: BAR 0: trying firmware assignment [io 0x2000-0x20ff] [ 1.086415] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 1.092506] pci 0000:02:00.0: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]) [ 1.101018] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.106247] pci 0000:03:06.0: BAR 0: can't assign mem pref (size 0x1000) [ 1.112939] pci 0000:03:06.0: BAR 0: trying firmware assignment [mem 0xd0100000-0xd0100fff pref] [ 1.121702] pci 0000:03:06.0: BAR 0: assigned [mem 0xd0100000-0xd0100fff pref] [ 1.128916] pci 0000:03:06.0: BAR 0: set to [mem 0xd0100000-0xd0100fff pref] (PCI address [0xd0100000-0xd0100fff]) [ 1.139244] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 1.144487] pci 0000:00:0a.0: setting latency timer to 64 [ 1.144525] NET: Registered protocol family 2 [ 1.148922] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.156306] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.165050] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.172085] TCP: Hash tables configured (established 262144 bind 65536) [ 1.178698] TCP reno registered [ 1.181846] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.187853] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.194353] NET: Registered protocol family 1 [ 1.198718] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.205702] pci 0000:01:05.0: Boot video device [ 1.205712] PCI: CLS 64 bytes, default 64 [ 1.207635] audit: initializing netlink socket (disabled) [ 1.213044] type=2000 audit(1324316282.212:1): initialized [ 1.222504] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.233657] msgmni has been set to 3505 [ 1.237959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.245364] io scheduler noop registered [ 1.249303] io scheduler deadline registered [ 1.253662] io scheduler cfq registered (default) [ 1.258471] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.258515] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X [ 1.258859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.530157] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.593350] hpet_acpi_add: no address or irqs in _CRS [ 1.598467] Linux agpgart interface v0.103 [ 1.603069] uvesafb: Getting VBE info block failed (eax=0x4f00, err=0) [ 1.609598] uvesafb: vbe_init() failed with -22 [ 1.614129] uvesafb: probe of uvesafb.0 failed with error -22 [ 1.619953] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.628117] ACPI: Power Button [PWRB] [ 1.631853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.639243] ACPI: Power Button [PWRF] [ 1.643069] ACPI: Fan [FAN0] (on) [ 1.646441] ACPI: acpi_idle registered with cpuidle [ 1.667058] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.672724] ACPI: Thermal Zone [TZ00] (40 C) [ 1.679331] brd: module loaded [ 1.683619] loop: module loaded [ 1.687135] ahci 0000:00:11.0: version 3.0 [ 1.687151] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.694036] ahci 0000:00:11.0: irq 41 for MSI/MSI-X [ 1.694136] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.702217] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.711610] scsi0 : ahci [ 1.714329] scsi1 : ahci [ 1.717052] scsi2 : ahci [ 1.719739] scsi3 : ahci [ 1.722460] ata1: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309100 irq 41 [ 1.729846] ata2: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309180 irq 41 [ 1.737234] ata3: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309200 irq 41 [ 1.744618] ata4: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309280 irq 41 [ 1.752431] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.759652] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.764624] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.769797] mousedev: PS/2 mouse device common for all mice [ 1.775618] rtc_cmos 00:01: RTC can wake from S4 [ 1.780393] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.786517] rtc0: alarms up to one day, 114 bytes nvram [ 1.791787] i2c /dev entries driver [ 1.791930] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.804087] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 1.812649] cpuidle: using governor ladder [ 1.816750] cpuidle: using governor menu [ 1.820900] TCP cubic registered [ 1.824484] NET: Registered protocol family 10 [ 1.829207] IPv6 over IPv4 tunneling driver [ 1.833780] NET: Registered protocol family 17 [ 1.838423] registered taskstats version 1 [ 1.842746] Magic number: 7:848:643 [ 1.846464] powernow-k8: Found 1 AMD Athlon(tm) II X2 245e Processor (2 cpu cores) (version 2.20.00) [ 1.855605] powernow-k8: 0 : pstate 0 (2900 MHz) [ 1.860482] powernow-k8: 1 : pstate 1 (2100 MHz) [ 2.067051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.073261] ata4: SATA link down (SStatus 0 SControl 300) [ 2.078703] ata2: SATA link down (SStatus 0 SControl 300) [ 2.084159] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.090933] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 2.097548] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.104700] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB03, max UDMA/33 [ 2.111306] ata3.00: applying bridge limits [ 2.117600] ata1.00: configured for UDMA/133 [ 2.121883] ata3.00: configured for UDMA/33 [ 2.121960] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5 [ 2.134396] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.142038] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.142092] sd 0:0:0:0: [sda] Write Protect is off [ 2.142095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.142108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.161181] sda: sda1 sda2 sda3 sda4 [ 2.165394] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.165682] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB03 PQ: 0 ANSI: 5 [ 2.174083] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.174086] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.174201] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.174275] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.201794] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) [ 2.208053] Refined TSC clocksource calibration: 2907.446 MHz. [ 2.208057] Switching to clocksource tsc [ 2.224131] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 2.259299] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.266951] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.274518] Freeing unused kernel memory: 572k freed [ 3.733179] udev[3812]: starting version 164 [ 3.851917] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 3.851921] Disabling lock debugging due to kernel taint [ 3.875637] usbcore: registered new interface driver usbfs [ 3.875648] usbcore: registered new interface driver hub [ 3.881843] usbcore: registered new device driver usb [ 3.885042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.885070] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.885092] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default [ 3.895287] r8169 0000:02:00.0: setting latency timer to 64 [ 3.895361] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 3.896221] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000061c000, ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 42 [ 3.905050] IR NEC protocol handler initialized [ 3.914830] IR RC5(x) protocol handler initialized [ 3.918190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.918225] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.918245] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 3.918252] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 3.918264] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.918294] ehci_hcd 0000:00:12.2: debug port 1 [ 3.918328] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd8309400 [ 3.920248] Mantis 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.921382] DVB: registering new adapter (Mantis DVB adapter) [ 3.923183] IR RC6 protocol handler initialized [ 3.924028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.924053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.924056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.924058] usb usb1: Product: EHCI Host Controller [ 3.924060] usb usb1: Manufacturer: Linux 3.1.5-gentoo ehci_hcd [ 3.924062] usb usb1: SerialNumber: 0000:00:12.2 [ 3.924144] hub 1-0:1.0: USB hub found [ 3.924148] hub 1-0:1.0: 6 ports detected [ 3.924235] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.924256] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 3.924262] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.924273] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.924300] ehci_hcd 0000:00:13.2: debug port 1 [ 3.924335] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd8309500 [ 3.930015] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.930145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.930148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.930151] usb usb2: Product: EHCI Host Controller [ 3.930153] usb usb2: Manufacturer: Linux 3.1.5-gentoo ehci_hcd [ 3.930155] usb usb2: SerialNumber: 0000:00:13.2 [ 3.936309] hub 2-0:1.0: USB hub found [ 3.936315] hub 2-0:1.0: 6 ports detected [ 3.941542] [fglrx] Maximum main memory to use for locked dma buffers: 1638 MBytes. [ 3.941610] [fglrx] vendor: 1002 device: 9616 count: 1 [ 3.942075] [fglrx] ioport: bar 1, base 0x1000, size: 0x100 [ 3.942097] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.942104] pci 0000:01:05.0: setting latency timer to 64 [ 3.942527] [fglrx] Kernel PAT support is enabled [ 3.942545] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors [ 3.943460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.943489] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.943510] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.943517] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 3.943556] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd8304000 [ 3.998045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.998049] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.998052] usb usb3: Product: OHCI Host Controller [ 3.998054] usb usb3: Manufacturer: Linux 3.1.5-gentoo ohci_hcd [ 3.998055] usb usb3: SerialNumber: 0000:00:12.0 [ 3.998142] hub 3-0:1.0: USB hub found [ 3.998150] hub 3-0:1.0: 3 ports detected [ 3.998220] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.998245] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 3.998250] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 3.998273] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd8305000 [ 4.053037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.053040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.053042] usb usb4: Product: OHCI Host Controller [ 4.053044] usb usb4: Manufacturer: Linux 3.1.5-gentoo ohci_hcd [ 4.053046] usb usb4: SerialNumber: 0000:00:12.1 [ 4.053103] hub 4-0:1.0: USB hub found [ 4.053110] hub 4-0:1.0: 3 ports detected [ 4.053165] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.053176] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 4.053181] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 4.053212] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd8306000 [ 4.101710] IR JVC protocol handler initialized [ 4.108053] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.108056] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.108059] usb usb5: Product: OHCI Host Controller [ 4.108061] usb usb5: Manufacturer: Linux 3.1.5-gentoo ohci_hcd [ 4.108062] usb usb5: SerialNumber: 0000:00:13.0 [ 4.108151] hub 5-0:1.0: USB hub found [ 4.108158] hub 5-0:1.0: 3 ports detected [ 4.108231] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.108252] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.108258] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 4.108280] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd8307000 [ 4.163040] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.163043] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.163045] usb usb6: Product: OHCI Host Controller [ 4.163047] usb usb6: Manufacturer: Linux 3.1.5-gentoo ohci_hcd [ 4.163049] usb usb6: SerialNumber: 0000:00:13.1 [ 4.163111] hub 6-0:1.0: USB hub found [ 4.163118] hub 6-0:1.0: 3 ports detected [ 4.163177] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.163188] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 4.163193] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 4.163210] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd8308000 [ 4.218037] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.218040] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.218042] usb usb7: Product: OHCI Host Controller [ 4.218045] usb usb7: Manufacturer: Linux 3.1.5-gentoo ohci_hcd [ 4.218047] usb usb7: SerialNumber: 0000:00:14.5 [ 4.218106] hub 7-0:1.0: USB hub found [ 4.218113] hub 7-0:1.0: 2 ports detected [ 4.245919] IR Sony protocol handler initialized [ 4.248212] IR MCE Keyboard/mouse protocol handler initialized [ 4.486008] usb 6-2: new low speed USB device number 2 using ohci_hcd [ 4.495977] lirc_dev: IR Remote Control driver registered, major 250 [ 4.496305] IR LIRC bridge handler initialized [ 4.630842] usb 6-2: New USB device found, idVendor=15c2, idProduct=0038 [ 4.630845] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.635303] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3 [ 4.667006] Registered IR keymap rc-imon-pad [ 4.667089] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/rc/rc0/input4 [ 4.667121] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/rc/rc0 [ 4.672036] imon 6-2:1.0: iMON device (15c2:0038, intf0) on usb<6:2> initialized [ 4.672052] imon 6-2:1.1: iMON device (15c2:0038, intf1) on usb<6:2> initialized [ 4.672065] usbcore: registered new interface driver imon [ 4.672227] usbcore: registered new interface driver usbhid [ 4.672230] usbhid: USB HID core driver [ 4.779439] tda10021_attach: driver disabled by Kconfig [ 4.780649] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 6.910203] EXT4-fs (sda3): re-mounted. Opts: (null) [ 6.979135] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 6.982838] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 7.007573] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.038870] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem [ 7.043705] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null) [ 7.062363] EXT4-fs (dm-2): mounting ext2 file system using the ext4 subsystem [ 7.067086] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null) [ 7.102780] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 7.125005] EXT4-fs (dm-4): mounting ext2 file system using the ext4 subsystem [ 7.129718] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null) [ 7.165591] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 7.465589] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k [ 8.750766] syslog-ng (5061): Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). [ 23.555634] NVRM: No NVIDIA graphics adapter found! [ 28.171160] NVRM: No NVIDIA graphics adapter found!