fixup patch from ticket #152 for coreboot trunk
(http://tracker.coreboot.org/trac/coreboot/ticket/152)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>

Index: src/southbridge/amd/cs5536/cs5536_early_setup.c
===================================================================
--- src/southbridge/amd/cs5536/cs5536_early_setup.c	(revision 4967)
+++ src/southbridge/amd/cs5536/cs5536_early_setup.c	(working copy)
@@ -172,6 +172,7 @@
 	outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE);
 	/* Set: OUTAUX1 Select (0x10) */
 	outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT);
+
 	/* GPIO9 - UART1_RX */
 	/* Set: Input Enable   (0x20) */
 	outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
Index: src/southbridge/amd/cs5536/cs5536.c
===================================================================
--- src/southbridge/amd/cs5536/cs5536.c	(revision 4967)
+++ src/southbridge/amd/cs5536/cs5536.c	(working copy)
@@ -298,7 +298,7 @@
 		/* Set: OUTAUX1 Select (0x10) */
 		outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
 
-		/* GPIO8 - UART1_RX */
+		/* GPIO9 - UART1_RX */
 		/* Set: Input Enable   (0x20) */
 		outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE);
 		/* Set: INAUX1 Select  (0x34) */
@@ -356,18 +356,18 @@
 		msr.lo |= sb->com2_irq << 28;
 		wrmsr(MDD_IRQM_YHIGH, msr);
 
-		/* GPIO4 - UART2_RX */
+		/* GPIO3 - UART2_RX */
+		/* Set: Input Enable (0x20) */
+		outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE);
+		/* Set: INAUX1 Select (0x34) */
+		outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);
+
+		/* GPIO4 - UART2_TX */
 		/* Set: Output Enable (0x4) */
 		outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
 		/* Set: OUTAUX1 Select (0x10) */
 		outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
 
-		/* GPIO3 - UART2_TX */
-		/* Set: Input Enable (0x20) */
-		outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE);
-		/* Set: INAUX1 Select (0x34) */
-		outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);
-
 		/* Set: GPIO 3 and 4 Pull Up (0x18) */
 		outl(GPIOL_3_SET | GPIOL_4_SET,
 		     gpio_addr + GPIOL_PULLUP_ENABLE);