While hunting yet another bug, I noticed that part of my serial log is missing.
Especially I missed the Allocating & Setting resources.
It turns out that the code which enables specific LDN is somewhat buggy:
static void w83627dhg_pnp_enable(device_t dev)
- if (!dev->enabled)
- pnp_set_enable(dev, 0);
So instead of enable the device the device gets disabled. However after some
time the serial line gets back, most likely some "enable resources" might fix
I'm attaching patch which somewhat fixes the problem and changes the function to
look same in all superio code. Some boards even did not convert the dev->enabled
to 0,1 values.
Also makes me wonder some sio call pnp_enable directly, which has yet another
semantics, it wont enable already enabled devices just disable those which
declared not enabled. And no PnP enter conf magic is called (maybe this is the
Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz>
Not abuild tested, works on dhg. I need to know if this fix is OK this way.