Calibrating delay loop... 296M loops per second. OK.
No LinuxBIOS table found.
Found chipset "NVIDIA MCP55", enabling flash write... OK.
Found board "GIGABYTE GA-M57SLI-S4": enabling flash write... Serial flash segment 0xfffe0000-0xffffffff enabled
Serial flash segment 0x000e0000-0x000fffff enabled
Serial flash segment 0xffee0000-0xffefffff disabled
Serial flash segment 0xfff80000-0xfffeffff enabled
LPC write to serial flash enabled
serial flash pin 29
OK.
Probing for Am29F040B, 512 KB
probe_29f040b: id1 0x49, id2 0x4d
Probing for Am29LV040B, 512 KB
probe_29f040b: id1 0x49, id2 0x4d
Probing for Am29F016D, 2048 KB
probe_29f040b: id1 0xff, id2 0xff
Probing for AE49F2008, 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for At29C040A, 512 KB
probe_jedec: id1 0x49, id2 0x4d
Probing for At29C020, 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for At49F002(N), 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for At49F002(N)T, 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for EN29F002(A)(N)T, 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for EN29F002(A)(N)B, 256 KB
probe_jedec: id1 0x92, id2 0xe4
Probing for MBM29F400TC, 512 KB
probe_m29f400bt: id1 0x49, id2 0x44
Probing for MX29F002, 256 KB
probe_29f002: id1 0x92, id2 0xe4
Probing for MX25L4005, 512 KB
RDID returned c2 20 14.
probe_spi: id1 0xc2, id2 0x2014
Probing for MX25L8005, 1024 KB
RDID returned c2 20 14.
probe_spi: id1 0xc2, id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP) is not set
MX25L8005 found at physical address 0xfff00000.
Flash part is MX25L8005 (1024 KB).
No operations were specified.