On 01.11.2008 22:28, Carl-Daniel Hailfinger wrote:
> On 01.11.2008 20:11, Carl-Daniel Hailfinger wrote:
>
>> On 01.11.2008 18:56, Corey Osgood wrote:
>>
>>
>>> System reset seems to occur between 2 and 3, both of those logs attached,
>>> along with arch/x86/via/stage1.o With HALT_AFTER=3, the post code keeps
>>> changing, as expected with the system rebooting, with HALT_AFTER=2 it was
>>> 0xc2.
>>>
>>>
>>>
>> Great results, thanks a lot!
>> One bug spotted and fixed. Can you retest with the same method and the
>> updated patch attached to this mail? I hope it will die much later,
>> perhaps at HALT_AFTER=13 or so.
>>
>>
>
> Thanks for the information that HALT_AFTER=5 is the last working setting.
>

OK, I reread every line of the code and reimplemented the problematic
stuff from scratch.

Can you try the new patch with HALT_AFTER=5 and 6? I'm pretty confident
that if 6 works, all later numbers should also not reboot.
By the way, the new code should be even better than the (working) v2 code.

That did the trick!

Thanks,
Corey