* Dieter Bloms <dieter(a)bloms.de> [070606 08:36]:
You might have
to adapt the PCI ID of the south bridge's LPC interface
device (24cc in the below example)
I used 24c0, because of:
00:1f.0 ISA bridge : Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface
Bridge [8086:24c0] (rev 02)
Ok, that looks correct.
no it doesn't work neither with 2e nor with 4e :(
Pity! Then this is not the only problem at least. I am sure it is
required on ICH4 based boards though as ICH4 does not decode any superio
at poweron. More at a later time.
I think I have something total wrong with my config.
I have tared my stuff, maybe someone is willing to have a look at it:
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info(a)coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866