Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/303
-gerrit
commit b4cba9b1517555f1c978880bd998404197e0e5de Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Mon Oct 17 18:08:13 2011 +0300
Add support for A-Open DXPL Plus-U motherboard
This is an old (pre-2005) entry-level server mainboard. The code is adapted from mainboard/intel/xe7501devkit.
Featured chips: - Dual socket604 - E7505 northbridge - 82801DB southbridge (with EHCI debug port) - 82870p2 PCI-X bridge - LPC47M102S-MC super-io - 512kB FWH flash (flashrom does the job well)
What works: - Dual-Xeon P4/HT boot with microcode update - RAM: registered ECC DDR266 in dual-channel - PCI-X slot interrupts with ACPI and I/O apic - On-board PCI-X GbE and SCSI - ACPI power-off and wakeup with PME#
Notes : - Current ACPI is more or less a mess - Interrupts do not route correctly with PIRQ - MP-table is not implemented - Issues with reboots remain (cold and warm) - Many superio devices are disabled by default - Audio codec is not investigated
Change-Id: I02d18c83f485a09ada65dde03bcc86e9163f2011 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/mainboard/Kconfig | 3 + src/mainboard/aopen/Kconfig | 17 ++ src/mainboard/aopen/dxplplusu/Kconfig | 56 +++++++ src/mainboard/aopen/dxplplusu/Makefile.inc | 1 + src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl | 68 ++++++++ src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl | 51 ++++++ src/mainboard/aopen/dxplplusu/acpi/i82801db.asl | 138 ++++++++++++++++ src/mainboard/aopen/dxplplusu/acpi/p64h2.asl | 72 +++++++++ src/mainboard/aopen/dxplplusu/acpi/power.asl | 73 +++++++++ src/mainboard/aopen/dxplplusu/acpi/scsi.asl | 20 +++ src/mainboard/aopen/dxplplusu/acpi/superio.asl | 181 ++++++++++++++++++++++ src/mainboard/aopen/dxplplusu/acpi_tables.c | 151 ++++++++++++++++++ src/mainboard/aopen/dxplplusu/bus.h | 16 ++ src/mainboard/aopen/dxplplusu/chip.h | 4 + src/mainboard/aopen/dxplplusu/cmos.layout | 55 +++++++ src/mainboard/aopen/dxplplusu/devicetree.cb | 69 ++++++++ src/mainboard/aopen/dxplplusu/dsdt.asl | 97 ++++++++++++ src/mainboard/aopen/dxplplusu/fadt.c | 166 ++++++++++++++++++++ src/mainboard/aopen/dxplplusu/failover.c | 48 ++++++ src/mainboard/aopen/dxplplusu/ioapic.h | 9 + src/mainboard/aopen/dxplplusu/irq_tables.c | 61 ++++++++ src/mainboard/aopen/dxplplusu/mainboard.c | 7 + src/mainboard/aopen/dxplplusu/romstage.c | 80 ++++++++++ 23 files changed, 1443 insertions(+), 0 deletions(-)
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig index 13032a6..549962f 100644 --- a/src/mainboard/Kconfig +++ b/src/mainboard/Kconfig @@ -14,6 +14,8 @@ config VENDOR_ADVANTECH bool "Advantech" config VENDOR_AMD bool "AMD" +config VENDOR_AOPEN + bool "AOpen" config VENDOR_ARIMA bool "Arima" config VENDOR_ARTEC_GROUP @@ -131,6 +133,7 @@ source "src/mainboard/abit/Kconfig" source "src/mainboard/advansus/Kconfig" source "src/mainboard/advantech/Kconfig" source "src/mainboard/amd/Kconfig" +source "src/mainboard/aopen/Kconfig" source "src/mainboard/arima/Kconfig" source "src/mainboard/artecgroup/Kconfig" source "src/mainboard/asi/Kconfig" diff --git a/src/mainboard/aopen/Kconfig b/src/mainboard/aopen/Kconfig new file mode 100644 index 0000000..5b5497c --- /dev/null +++ b/src/mainboard/aopen/Kconfig @@ -0,0 +1,17 @@ +if VENDOR_AOPEN + +choice + prompt "Mainboard model" + +config BOARD_AOPEN_DXPLPLUSU + bool "DXPL Plus-U" + +endchoice + +source "src/mainboard/aopen/dxplplusu/Kconfig" + +config MAINBOARD_VENDOR + string + default "AOpen" + +endif # VENDOR_AOPEN diff --git a/src/mainboard/aopen/dxplplusu/Kconfig b/src/mainboard/aopen/dxplplusu/Kconfig new file mode 100644 index 0000000..f39771e --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/Kconfig @@ -0,0 +1,56 @@ +if BOARD_AOPEN_DXPLPLUSU + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_INTEL_SOCKET_MPGA604 + select NORTHBRIDGE_INTEL_E7505 + select SOUTHBRIDGE_INTEL_I82870 + select SOUTHBRIDGE_INTEL_I82801DX + select SUPERIO_SMSC_LPC47M10X + select ROMCC + select HAVE_HARD_RESET + select HAVE_PIRQ_TABLE +# select PIRQ_ROUTE + select UDELAY_TSC +# select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default aopen/dxplplusu + +config MAINBOARD_PART_NUMBER + string + default "DXPL Plus-U" + +config IRQ_SLOT_COUNT + int + default 12 + +config BOARD_HAS_FADT + bool + default y + +config LOGICAL_CPUS + bool + default n + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x0 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x0 + +endif # BOARD_AOPEN_DXPLPLUSU diff --git a/src/mainboard/aopen/dxplplusu/Makefile.inc b/src/mainboard/aopen/dxplplusu/Makefile.inc new file mode 100644 index 0000000..0f285cd --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/Makefile.inc @@ -0,0 +1 @@ +ROMCCFLAGS := -mcpu=p4 -O2 diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl new file mode 100644 index 0000000..c429a6c --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl @@ -0,0 +1,68 @@ + + + Device (MBRS) + { + Name (_HID, EisaId ("PNP0C01")) + Name (_UID, 0x01) + Name (MSBF, ResourceTemplate () + { + /* System memory */ + QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxNotFixed, Prefetchable, ReadWrite, + 0x0, 0x100000000, 0x400000000, 0x0, 0x0, ,, _Y1C, AddressRangeMemory, TypeStatic) + + /* Top Of Low Memory */ + Memory32 (ReadOnly, 0x0, 0x0, 0x1, 0x0, _Y1D) + + /* 640kB who wants more? */ + Memory32Fixed (ReadWrite, 0x0, 0xA0000, ) + + /* 64k BIOS bootblock */ + Memory32Fixed (ReadOnly, 0xF0000, 0x10000,) + + /* Memory hole below 16 MB */ + Memory32Fixed (ReadOnly, 0x100000, 0xF00000,) + /* Memory hole in 15-16 MB */ + /* Memory32Fixed (ReadOnly, 0x100000, 0xE00000,) */ + + + /* Local APIC */ + Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000,) + }) + + Method (_CRS, 0, NotSerialized) + { + CreateQWordField (MSBF, _SB.MBRS._Y1C._MIN, MEML) + CreateQWordField (MSBF, _SB.MBRS._Y1C._MAX, MEMM) + CreateQWordField (MSBF, _SB.MBRS._Y1C._LEN, LELM) + + And (_SB.PCI0.RLAR, 0x03FF, Local1) + Increment (Local1) + If (LGreater (Local1, 0x40)) + { + ShiftLeft (Local1, 0x1A, LELM) + } + + + CreateDWordField (MSBF, _SB.MBRS._Y1D._MIN, MS00) + CreateDWordField (MSBF, _SB.MBRS._Y1D._MAX, MS01) + CreateDWordField (MSBF, _SB.MBRS._Y1D._LEN, MEM2) + And (_SB.PCI0.TOLM, 0xF800, Local1) + ShiftRight (Local1, 0x04, Local1) + Decrement (Local1) + If (LGreater (Local1, 0x10)) + { + Subtract (Local1, 0x0F, Local1) + Store (ShiftLeft (Local1, 0x14), MEM2) + Store (0x01000000, MS00) + Store (MS00, MS01) + } + + Return (MSBF) + } + + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + } + diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl new file mode 100644 index 0000000..2ecdd0f --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl @@ -0,0 +1,51 @@ + + Name (PBRS, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, 0x0000, 0x00FF, 0x0000, 0x0100, ,, ) + + /* System IO */ + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0, 0x0, 0xffff, 0x0000, 0x10000, ,,, TypeStatic) + IO (Decode16, 0x0CF8, 0x0CF8, 0x08, 0x08, ) + + /* Video RAM */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000A0000, 0x000BFFFF, + 0x00000000, 0x00020000, ,,, AddressRangeMemory, TypeStatic) + + /* Video ROM */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000C0000, 0x000C7FFF, + 0x00000000, 0x00008000, ,,, AddressRangeMemory, TypeStatic) + + /* Option ROMs ? */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000C8000, 0x000DFFFF, + 0x00000000, 0x00018000, ,,, AddressRangeMemory, TypeStatic) + + /* Top Of Lowmemory to IOAPIC */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x02000000, 0xFEBFFFFF, + 0x00000000, 0xFCC00000, ,, _Y08, AddressRangeMemory, TypeStatic) + }) + + Method (_CRS, 0, NotSerialized) + { + + /* Top Of Lowmemory to IOAPIC */ + CreateDWordField (PBRS, _SB.PCI0._Y08._MIN, MEML) + CreateDWordField (PBRS, _SB.PCI0._Y08._LEN, LENM) + And (_SB.PCI0.TOLM, 0xF800, Local1) + ShiftRight (Local1, 0x04, Local1) + ShiftLeft (Local1, 0x14, MEML) + Subtract (0xFEC00000, MEML, LENM) + + Return (PBRS) + } + + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + diff --git a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl new file mode 100644 index 0000000..fdf0101 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl @@ -0,0 +1,138 @@ + + Device (USB0) { + Name (_ADR, 0x001D0000) + Name (_PRW, Package () { 0x03, 0x05 }) + + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { Offset (0xC4), URES, 8 } + } + + Device (USB1) { + Name (_ADR, 0x001D0001) + Name (_PRW, Package () { 0x04, 0x05 }) + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { Offset (0xC4), URES, 8 } + } + + Device (USB2) { + Name (_ADR, 0x001D0002) + Name (_PRW, Package () { 0x0C, 0x05 }) + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { Offset (0xC4), URES, 8 } + } + + Device (USB3) { + Name (_ADR, 0x001D0007) + Name (_PRW, Package () { 0x0D, 0x05 }) /* PME_B0_STS any 0:1d or 0:1f device */ + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { Offset (0xC4), URES, 8 } + } + + Device(PCI5) { + Name (_ADR, 0x001E0000) + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + Name (_PRT, Package() { + Package() { 0x0003ffff, 0, 0, 20 }, + Package() { 0x0003ffff, 1, 0, 21 }, + Package() { 0x0003ffff, 2, 0, 22 }, + Package() { 0x0003ffff, 3, 0, 23 }, + }) + } + + Device (ICH0) { + Name (_ADR, 0x001F0000) + + OperationRegion (D310, PCI_Config, 0x00, 0xFF) + Field (D310, ByteAcc, NoLock, Preserve) + { + Offset (0x40), PBAR, 16, + Offset (0x58), GBAR, 16, + } + + OperationRegion (ACPI, SystemIO, 0x0400, 0xC0) + Field (ACPI, ByteAcc, NoLock, Preserve) + { + Offset (0x00), PS1L,8, PS1H,8, PE1L,8, PE1H,8, + Offset (0x28), GS0L,8, GS0H,8, GSPL,8, GSPH,8, + Offset (0x2C), GE0L,8, GE0H,8, GEPL,8, GEPH,8, + Offset (0xB8), GPLV,8 + } + + Name (MSBF, ResourceTemplate () { + + /* IOAPIC 0 */ + Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000,) + + IO (Decode16, 0x0, 0x0, 0x80, 0x0, PMIO) + IO (Decode16, 0x0, 0x0, 0x40, 0x0, GPIO) + + /* 8254 legacy irq */ + IO (Decode16, 0x04D0, 0x04D0, 0x02, 0x02,) + + /* reset generator */ + IO (Decode16, 0x0092, 0x0092, 0x01, 0x01, ) + }) + + Method (_CRS, 0, NotSerialized) + { + CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MIN, IOA1) + CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MAX, IOA2) + CreateByteField (MSBF, _SB_.PCI0.ICH0.PMIO._LEN, IOAL) + + Store (PBAR, Local0) + If ( Land(Local0, 0x01) ) { + And (Local0, 0xFFFE, Local0) + Store (Local0, IOA1) + Store (Local0, IOA2) + Store (0x80, IOAL) + } Else { + Store (0x00, IOAL) + } + + CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MIN, IOS1) + CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MAX, IOS2) + CreateByteField (MSBF, _SB_.PCI0.ICH0.GPIO._LEN, IOSL) + + Store (GBAR, Local0) + If ( Land(Local0, 0x01) ) { + And (Local0, 0xFFFE, Local0) + Store (Local0, IOS1) + Store (Local0, IOS2) + Store (0x40, IOSL) + } Else { + Store (0x00, IOSL) + } + Return (MSBF) + } + + + + Device (FWH) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + + Name (MSBG, ResourceTemplate () { + Memory32Fixed (ReadOnly, 0xFFF00000, 0x00080000,) + Memory32Fixed (ReadOnly, 0xFFF80000, 0x00080000,) + }) + + Method (_CRS, 0, NotSerialized) + { + Return (MSBG) + } + } + + Device (SMSC) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x02) + #include "acpi/superio.asl" + } + + } + + + diff --git a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl new file mode 100644 index 0000000..914996d --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl @@ -0,0 +1,72 @@ + + + /* bus 03 */ + + Device(PBIO) { + Name (_HID, "ACPI000A") + Name (_ADR, 0x001c0000) + } + + Device(P64B) { + Name (_ADR, 0x001d0000) + + Name (_PRT, Package() { + Package() { 0x0002ffff, 0, 0, 24 }, /* eth0 */ + Package() { 0x0002ffff, 1, 0, 25 }, /* eth1 */ + Package() { 0x0002ffff, 2, 0, 26 }, + Package() { 0x0002ffff, 3, 0, 27 }, + Package() { 0x0003ffff, 0, 0, 28 }, /* eth2 */ + Package() { 0x0003ffff, 1, 0, 29 }, /* eth3 */ + Package() { 0x0003ffff, 2, 0, 30 }, + Package() { 0x0003ffff, 3, 0, 31 }, + Package() { 0x0004ffff, 0, 0, 32 }, /* eth4 */ + }) + + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) + Field (PBPC, ByteAcc, NoLock, Preserve) + { Offset (0x3E), BCRL, 8, BCRH, 8 } + + + Device (ETH0) { + Name (_ADR, 0x00040000) + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + } + } + + + /* bus 04 */ + + Device(PAIO) { + Name (_HID, "ACPI000A") + Name (_ADR, 0x001e0000) + } + + Device(P64A) { + Name (_ADR, 0x001f0000) + Name (_PRT, Package() { + Package() { 0x0002ffff, 0, 0, 48 }, /* eth5 */ + Package() { 0x0002ffff, 1, 0, 49 }, /* eth6 */ + Package() { 0x0002ffff, 2, 0, 50 }, + Package() { 0x0002ffff, 3, 0, 51 }, + + Package() { 0x0003ffff, 0, 0, 52 }, + Package() { 0x0003ffff, 1, 0, 53 }, + Package() { 0x0003ffff, 2, 0, 54 }, /* ? */ + Package() { 0x0003ffff, 3, 0, 55 }, /* ? */ + + Package() { 0x0004ffff, 0, 0, 54 }, /* not 56 ?? */ + Package() { 0x0004ffff, 1, 0, 55 }, /* not 57 ?? */ + }) + + + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) + Field (PBPC, ByteAcc, NoLock, Preserve) + { Offset (0x3E), BCRL, 8, BCRH, 8 } + + #include "acpi/scsi.asl" + + } + + diff --git a/src/mainboard/aopen/dxplplusu/acpi/power.asl b/src/mainboard/aopen/dxplplusu/acpi/power.asl new file mode 100644 index 0000000..cbe38c2 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/power.asl @@ -0,0 +1,73 @@ + + + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S1, Package () { 0x01, 0x01, 0x00, 0x00 }) + Name (_S3, Package () { 0x05, 0x05, 0x00, 0x00 }) + Name (_S4, Package () { 0x06, 0x06, 0x00, 0x00 }) + Name (_S5, Package () { 0x07, 0x07, 0x00, 0x00 }) + + + Scope (_GPE) + { + Method (_L03, 0, NotSerialized) + { + Notify (_SB.PCI0.USB0, 0x02) + } + Method (_L04, 0, NotSerialized) + { + Notify (_SB.PCI0.USB1, 0x02) + } + + /* WOL header */ + Method (_L08, 0, NotSerialized) + { + Notify (_SB.PCI0.PCI5, 0x02) + Notify (_SB.SLBT, 0x02) + } + + /* PME# */ + Method (_L0B, 0, NotSerialized) + { +#if 1 + Notify (_SB.LID0, 0x02) +#else + Notify (_SB.PCI0.HLIB.P64B.ETH0, 0x02) + Notify (_SB.PCI0.HLIB.P64B, 0x02) + Notify (_SB.PCI0.HLIB.P64A, 0x02) +#endif + } + Method (_L0C, 0, NotSerialized) + { + Notify (_SB.PCI0.USB2, 0x02) + } + /* PME_B0_STS# */ + Method (_L0D, 0, NotSerialized) + { + Notify (_SB.PCI0.USB3, 0x02) + } + + } + + /* clear power buttons */ + Method (_INI, 0, NotSerialized) + { + Or (_SB.PCI0.ICH0.PS1H, 0x09, _SB.PCI0.ICH0.PS1H) + Or (_SB.PCI0.ICH0.PE1H, 0x01, _SB.PCI0.ICH0.PE1H) + } + + /* Prepare To Sleep */ + Method (_PTS, 1, NotSerialized) + { + Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) + Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) + } + + /* System Wake */ + Method (_WAK, 1, NotSerialized) + { + Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) + Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) + Return ( Package() { 0x0, 0x0 } ) + } + + diff --git a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl new file mode 100644 index 0000000..528fe49 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl @@ -0,0 +1,20 @@ + Device (SCS0) { + Name (_ADR, 0x00040000) + OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) + Field (SCSC, ByteAcc, NoLock, Preserve) { + Offset (0x2C), SID, 32, + Offset (0xE0), PMC, 8, + Offset (0xFF), IDW, 8 + } + } + + Device (SCS1) { + Name (_ADR, 0x00040001) + OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) + Field (SCSC, ByteAcc, NoLock, Preserve) { + Offset (0x2C), SID, 32, + Offset (0xE0), PMC, 8, + Offset (0xFF), IDW, 8 + } + } + diff --git a/src/mainboard/aopen/dxplplusu/acpi/superio.asl b/src/mainboard/aopen/dxplplusu/acpi/superio.asl new file mode 100644 index 0000000..4b3d4bd --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi/superio.asl @@ -0,0 +1,181 @@ + + Name (MSBF, ResourceTemplate () { + IO (Decode16, + 0x0000, // Range Minimum + 0x0000, // Range Maximum + 0x01, // Alignment + 0x80, // Length + _Y1B) + }) + + OperationRegion (LPC0, SystemIO, 0x0E00, 0x60) + Field (LPC0, ByteAcc, NoLock, Preserve) + { + PME0, 8, + Offset (0x02), PME2, 8, + Offset (0x04), PME4, 8, + Offset (0x0A), PMEA, 8, + Offset (0x23), + GC10,8,GC11,8,GC12,8,GC13,8,GC14,8,GC15,8,GC16,8,GC17,8, + GC20,8,GC21,8,GC22,8,GC23,8,GC24,8,GC25,8,GC26,8,GC27,8, + GC30,8,GC31,8,GC32,8,GC33,8,GC34,8,GC35,8,GC36,8,GC37,8, + GC40,8,GC41,8,GC42,8,GC43,8, + Offset (0x3F), + GC50,8,GC51,8,GC52,8,GC53,8,GC54,8,GC55,8,GC56,8,GC57,8, + GC60,8,GC61,8, + Offset (0x4B), GP_1, 8, GP_2, 8, GP_3, 8, GP_4, 8, GP_5, 8, GP_6, 8, + Offset (0x56), FAN1, 8, + Offset (0x5D), LED1, 8, LED2, 8 + } + + OperationRegion (SMC1, SystemIO, 0x2E, 0x02) + Field (SMC1, ByteAcc, NoLock, Preserve) + { + INDX, 8, + DATA, 8 + } + + IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, + Offset (0x22), + PWRC, 8, + Offset (0x30), + ACTR, 8, + Offset (0x60), + IOAH, 8, + IOAL, 8, + IOBH, 8, + IOBL, 8, + Offset (0x70), + INTR, 8, + Offset (0x72), + INT1, 8, + Offset (0x74), + DMCH, 8, + Offset (0xB2), + SPS1, 8, + SPS2, 8, + Offset (0xB8), + D2TS, 8, + Offset (0xF0), + OPT1, 8, + OPT2, 8, + OPT3, 8, + Offset (0xF4), + WDTC, 8, + Offset (0xF6), + GP01, 8, + GP02, 8, + GP04, 8 + } + + Method (ECFG, 0, NotSerialized) + { + Store (0x55, INDX) + } + + Method (XCFG, 0, NotSerialized) + { + Store (0xAA, INDX) + } + + Method (_CRS, 0, NotSerialized) + { + + CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MIN, IOM1) + CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MAX, IOM2) + CreateByteField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._LEN, IOML) + ECFG () + Store (0x0A, _SB.PCI0.ICH0.SMSC.LDN) + Store (0x00, IOM1) + Store (0x00, IOM2) + Or (_SB.PCI0.ICH0.SMSC.IOAH, IOM1, IOM1) + ShiftLeft (IOM1, 0x08, IOM1) + Or (_SB.PCI0.ICH0.SMSC.IOAL, IOM1, IOM1) + Store (IOM1, IOM2) + If (LNotEqual (IOM1, 0x00)) + { + Store (0x80, IOML) + } + XCFG () + + Return (MSBF) + } + + + Method (_INI, 0, NotSerialized) { + + Store (0x00, GC10) + Store (0x81, GC11) + Store (0x00, GC17) + Store (0x0c, GC21) + Store (0x00, GC22) + Store (0x04, GC27) + Store (0x04, GC30) + Store (0x01, GC31) + Store (0x01, GC32) + Store (0x01, GC33) + Store (0x01, GC34) /* GPI pwd */ + Store (0x01, GC35) /* GPI scsi */ +#if 1 + Store (0x01, GC42) /* GPI */ +#else + Store (0x84, GC42) /* nIO_PME */ +#endif + Store (0x86, GC60) /* led 1 */ + Store (0x81, GC61) /* led 2 ?? */ + + Store (GP_1, Local0) + And( Local0, 0x7C, Local0) + Or ( Local0, 0x81, Local0) + Store (Local0, GP_1) + + Store (GP_2, Local0) + And( Local0, 0xFE, Local0) + Or ( Local0, 0x00, Local0) + Store (Local0, GP_2) + + Store (GP_3, Local0) + And( Local0, 0x7F, Local0) + Or ( Local0, 0x80, Local0) + Store (Local0, GP_3) + + Store (GP_4, Local0) + And( Local0, 0x7F, Local0) + Or ( Local0, 0x00, Local0) + Store (Local0, GP_4) + + /* Power Led */ + Store (LED1, Local0) + And( Local0, 0xfc, Local0) + Or ( Local0, 0x01, Local0) + Store (Local0, LED1) + + } + + Method (MLED, 1, NotSerialized) + { + If (LEqual (Arg0, 0x00)) + { + Store (0x00, LED1) + } + + If (LOr (LEqual (Arg0, 0x01), LEqual (Arg0, 0x02))) + { + Store (0x01, LED1) + } + + If (LEqual (Arg0, 0x03)) + { + Store (0x02, LED1) + } + + If (LOr (LEqual (Arg0, 0x04), LEqual (Arg0, 0x05))) + { + Store (0x03, LED1) + } + } + + diff --git a/src/mainboard/aopen/dxplplusu/acpi_tables.c b/src/mainboard/aopen/dxplplusu/acpi_tables.c new file mode 100644 index 0000000..7ef0bba --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/acpi_tables.c @@ -0,0 +1,151 @@ +/* + * Ported to Intel XE7501DEVKIT from Agami Aruma + * written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * (C) 2005 Digital Design Corporation + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <assert.h> +#include "bus.h" +#include "ioapic.h" + + +extern unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int irq_start = 0; + device_t dev = 0; + struct resource* res = NULL; + + + // SJM: Hard-code CPU LAPIC entries for now + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 6); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 1); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 7); + + // Southbridge IOAPIC + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH4, 0xfec00000, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_B, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_A, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + + // Map ISA IRQ 0 to IRQ 2 + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0); + + // IRQ9 differs from ISA standard - ours is active high, level-triggered + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD); + + return current; +} + +#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_madt_t *madt; + acpi_facs_t *facs; + acpi_fadt_t *fadt; + acpi_header_t *dsdt; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current+=madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp,madt); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *)current; + memcpy(dsdt,(void *)AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + ALIGN_CURRENT; + memcpy(dsdt,(void *)AmlCode, dsdt->length); + + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt,facs,dsdt); + acpi_add_table(rsdp,fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} + diff --git a/src/mainboard/aopen/dxplplusu/bus.h b/src/mainboard/aopen/dxplplusu/bus.h new file mode 100644 index 0000000..870ab74 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/bus.h @@ -0,0 +1,16 @@ +#ifndef XE7501DEVKIT_BUS_H_INCLUDED +#define XE7501DEVKIT_BUS_H_INCLUDED + +// These were determined by seeing how coreboot enumerates the various +// PCI (and PCI-like) buses on the board. + +#define PCI_BUS_ROOT 0 +#define PCI_BUS_AGP 1 // AGP +#define PCI_BUS_E7501_HI_B 2 // P64H2#1 +#define PCI_BUS_P64H2_B 3 // P64H2#1 bus B +#define PCI_BUS_P64H2_A 4 // P64H2#1 bus A +#define PCI_BUS_ICH4 5 // ICH4 + +#define SUPERIO_BUS 8 // (arbitrary but unique bus #) + +#endif // XE7501DEVKIT_BUS_H_INCLUDED diff --git a/src/mainboard/aopen/dxplplusu/chip.h b/src/mainboard/aopen/dxplplusu/chip.h new file mode 100644 index 0000000..06f11d0 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/chip.h @@ -0,0 +1,4 @@ +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +}; diff --git a/src/mainboard/aopen/dxplplusu/cmos.layout b/src/mainboard/aopen/dxplplusu/cmos.layout new file mode 100644 index 0000000..66b4d86 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/cmos.layout @@ -0,0 +1,55 @@ +# NOTE: This file must be in UNIX format (not DOS) or build_opt_tbl fails: +# "Error - Name is an invalid identifier in line" + +entries + +#start-bit length config config-ID name +0 512 r 0 reserved_memory1 # We know nothing about the factory BIOS +512 512 r 0 reserved_memory2 # More factory BIOS + +# Work in progress. +# This is where we would put the LB RTC_BOOT_BYTE options once the code +# supports finding them there. +#1024 1 e 4 boot_option +#1025 1 e 4 last_boot +#1026 1 e 1 ECC_memory +#1028 4 r 0 reboot_bits + +# Options used by XE7501DevKit +#1032 3 e 5 baud_rate +#1035 1 e 2 hyper_threading +#1036 1 e 1 power_on_after_fail +#1037 1 e 1 nmi + +#1040 4 e 6 debug_level + +#1048 16 h 0 check_sum + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew + +checksums + +# Checksum FROM bit-location TO bit-location STORE AT bit-location +checksum 1024 1047 1048 diff --git a/src/mainboard/aopen/dxplplusu/devicetree.cb b/src/mainboard/aopen/dxplplusu/devicetree.cb new file mode 100644 index 0000000..b3afe69 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/devicetree.cb @@ -0,0 +1,69 @@ +chip northbridge/intel/e7505 + device pci_domain 0 on + device pci 0.0 on end # Chipset host controller + device pci 0.1 on end # Host RASUM controller + device pci 2.0 on # Hub interface B + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 4.0 off end # (undocumented) + device pci 6.0 off end # (undocumented) + chip southbridge/intel/i82801dx + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.7 on end # USB EHCI + device pci 1e.0 on # Hub to PCI bridge + device pci 2.0 off end + end + device pci 1f.0 on # LPC bridge + chip superio/smsc/lpc47m10x + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a on # ACPI + io 0x60 = 0x0e00 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC97 Audio + device pci 1f.6 off end # AC97 Modem + end # SB + end # PCI_DOMAIN + device lapic_cluster 0 on + chip cpu/intel/socket_mPGA604 + device lapic 0 on end +# device lapic 1 on end + end +# chip cpu/intel/socket_mPGA604 +# device lapic 6 on end +# device lapic 7 on end +# end + end +end diff --git a/src/mainboard/aopen/dxplplusu/dsdt.asl b/src/mainboard/aopen/dxplplusu/dsdt.asl new file mode 100644 index 0000000..1ffde87 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/dsdt.asl @@ -0,0 +1,97 @@ +/* This is a dummy dsdt. Normal ACPI requires a DSDT, but in this case, ACPI + is just a workaround for QNX. It would be nice to eventually have a real + dsdt here. + Note: It will not be hooked up at runtime. It won't even get linked. + But we still need this file. */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv2", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + Scope(_SB) { + + Device(PCI0) { + Name (_HID, EISAID("PNP0A03")) + Name (_ADR, 0x00) + Name (_PRT, Package() { + Package() { 0x001dffff, 0, 0, 16 }, + Package() { 0x001dffff, 1, 0, 19 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 23 }, + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 17 }, + }) + + #include "acpi/e7505_sec.asl" + + OperationRegion (I750, PCI_Config, 0x00, 0x0100) + Field (I750, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), + TOLM, 16, + RBAR, 16, + RLAR, 16 + } + } + #include "acpi/e7505_pri.asl" + + + Device (PWBT) + { + Name (_HID, EisaId ("PNP0C0C")) + Name (_PRW, Package () { 0x08, 0x05 }) + } + Device (SLBT) + { + Name (_HID, EisaId ("PNP0C0E")) + Name (_PRW, Package () { 0x0B, 0x05 }) + } + Device (LID0) + { + Name (_HID, EisaId ("PNP0C0D")) + Name (_PRW, Package () { 0x0B, 0x05 }) + } + + } + + Scope(_SB.PCI0) { + + Device(PCI1) { + Name (_ADR, 0x00010000) + Name (_PRT, Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + }) + + } + + Device(HLIB) { + Name (_ADR, 0x00020000) + Name (_PRT, Package() { + Package() { 0x001dffff, 0, 0, 18 }, + Package() { 0x001dffff, 1, 0, 18 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 18 }, + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 18 }, + Package() { 0x001fffff, 2, 0, 18 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + #include "acpi/p64h2.asl" + } + + #include "acpi/i82801db.asl" + + } + + #include "acpi/power.asl" + +} + + + diff --git a/src/mainboard/aopen/dxplplusu/fadt.c b/src/mainboard/aopen/dxplplusu/fadt.c new file mode 100644 index 0000000..1daf8e9 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/fadt.c @@ -0,0 +1,166 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ +#define APM_CNT 0x0 /* ACPI mode only */ +#define CST_CONTROL 0x85 +#define PST_CONTROL 0x0 +#define ACPI_DISABLE 0xAA +#define ACPI_ENABLE 0x55 +#define S4_BIOS 0x77 +#define GNVS_UPDATE 0xea + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, "CORE ", 6); + memcpy(header->oem_table_id, "COREBOOT", 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = 0; /* PM_MOBILE; */ + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = ACPI_ENABLE; + fadt->acpi_disable = ACPI_DISABLE; + fadt->s4bios_req = S4_BIOS; + fadt->pstate_cnt = PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = 0x0; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x28; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0) + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; /* CST_CONTROL; */ + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 85; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = 0x03; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x28; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/aopen/dxplplusu/failover.c b/src/mainboard/aopen/dxplplusu/failover.c new file mode 100644 index 0000000..cadcc0c --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/failover.c @@ -0,0 +1,48 @@ +#define ASSEMBLY 1 +#define __PRE_RAM__ +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "pc80/mc146818rtc_early.c" +#include "southbridge/intel/i82801dx/cmos_failover.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7505/reset_test.c" + +static unsigned long main(unsigned long bist) +{ + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else { + + check_cmos_failed(); + + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + } + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); +#if 0 + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); +#endif + fallback_image: + return bist; +} diff --git a/src/mainboard/aopen/dxplplusu/ioapic.h b/src/mainboard/aopen/dxplplusu/ioapic.h new file mode 100644 index 0000000..2f97f2a --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/ioapic.h @@ -0,0 +1,9 @@ +// IOAPIC addresses determined by coreboot enumeration. +// Someday add functions to get APIC IDs and versions from the chips themselves. + +#define IOAPIC_ICH4 2 +#define IOAPIC_P64H2_BUS_B 3 // IOAPIC 3 at 02:1c.0 MBAR = fe300000 DataAddr = fe300010 +#define IOAPIC_P64H2_BUS_A 4 // IOAPIC 4 at 02:1e.0 MBAR = fe301000 DataAddr = fe301010 + +#define P64H2_IOAPIC_VERSION 0x20 +#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-4 and P64-H2 diff --git a/src/mainboard/aopen/dxplplusu/irq_tables.c b/src/mainboard/aopen/dxplplusu/irq_tables.c new file mode 100644 index 0000000..a66a3d6 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/irq_tables.c @@ -0,0 +1,61 @@ +/* Run checkpir to verify any changes to this table... + Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx +*/ + +#include <arch/pirq_routing.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include "bus.h" + +#define UNUSED_INTERRUPT {0, 0} +#define PIRQ_A 0x60 +#define PIRQ_B 0x61 +#define PIRQ_C 0x62 +#define PIRQ_D 0x63 +#define PIRQ_E 0x68 +#define PIRQ_F 0x69 +#define PIRQ_G 0x6A +#define PIRQ_H 0x6B + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, // Size of this struct in bytes + 0, // PCI bus number on which the interrupt router resides + PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router + 0, // PCI-exclusive IRQ bitmap + PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router + PCI_DEVICE_ID_INTEL_82801DB_LPC, // Device ID of compatible PCI interrupt router + 0, // Additional miniport information + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero + 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0) + { + // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space + // This was determined from linux-2.6.11/arch/i386/pci/irq.c + // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15 + // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13 + // Not sure why IRQ9 isn't routable (inherited from Tyan S2735) + + // INTA# INTB# INTC# INTD# + // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu + + {PCI_BUS_ROOT, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus + {PCI_BUS_ROOT, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // USB 1.1 + + {PCI_BUS_P64H2_B, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_B, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_B, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // GbE + + {PCI_BUS_P64H2_A, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_A, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_A, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // SCSI + + {PCI_BUS_ICH4, PCI_DEVFN(3, 0), {{PIRQ_E, 0xdcf8}, {PIRQ_F, 0xdcf8}, {PIRQ_G, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // 32-bit slot + + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/aopen/dxplplusu/mainboard.c b/src/mainboard/aopen/dxplplusu/mainboard.c new file mode 100644 index 0000000..2d41509 --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/mainboard.c @@ -0,0 +1,7 @@ +#include <device/device.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("AOpen DXPL Plus-U Mainboard") +}; + diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c new file mode 100644 index 0000000..c8bb2dc --- /dev/null +++ b/src/mainboard/aopen/dxplplusu/romstage.c @@ -0,0 +1,80 @@ +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> +#include <stdlib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> + +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "southbridge/intel/i82801dx/early_smbus.c" +#include "southbridge/intel/i82801dx/reset.c" +#include "northbridge/intel/e7505/raminit.h" +#include "northbridge/intel/e7505/debug.c" +#include "superio/smsc/lpc47m10x/early_serial.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47M10X2_SP1) + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/e7505/raminit.c" +#include "northbridge/intel/e7505/reset_test.c" +#include "lib/generic_sdram.c" +#include "lib/ramtest.c" + + +// This function MUST appear last (ROMCC limitation) +static void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { 0x50, 0x52, 0, 0 }, + .channel1 = { 0x51, 0x53, 0, 0 }, + }, + }; + + if (bist == 0) { + // Skip this if there was a built in self test failure + early_mtrr_init(); + enable_lapic(); + } + + // Get the serial port running and print a welcome banner + lpc47m10x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); +// uart_init(); + console_init(); + + // Halt if there was a built in self test failure + report_bist_failure(bist); + + // print_pci_devices(); + + // If this is a warm boot, some initialization can be skipped + if (!bios_reset_detected()) { + enable_smbus(); + // dump_spd_registers(&memctrl[0]); + // dump_smbus_registers(); + // memreset_setup(); No-op for this chipset + sdram_initialize(ARRAY_SIZE(memctrl), memctrl); + + ram_check(0x200000,0x800000); + } + + + // NOTE: ROMCC dies with an internal compiler error + // if the following line is removed. + print_debug("SDRAM is up.\r\n"); + +}