On 12/18/2017 12:14 PM, Nico Huber wrote:
On 18.12.2017 11:44, Federico Amedeo Izzo wrote:
Hello,
I wanted to update coreboot on my X201 from the Feb 2017 source (commit 068edc1c52cb1e5b6376ba7f296ef8797a24cd5f) to current master (commit f2e7b37c52cac5e7825d0e01b3c45c1506e99253) But when compiling it gives the following error
src/northbridge/intel/nehalem/gma.c: In function 'gma_func0_init': src/northbridge/intel/nehalem/gma.c:1066:5: error: implicit declaration of function 'intel_gma_init' [-Werror=implicit-function-declaration] intel_gma_init(conf, res2mmio(gtt_res, 0, 0),```
Wooops, my fault! Fix here: https://review.coreboot.org/#/c/coreboot/+/22930
You just need to remove the #if and #endif in lines 575 and 1012, respectively.
Thanks, the fix works, and now the master compiles again.
Now it's configured to load a VGA blob, if I enable "native graphics init" instead, the compile error goes away, but the resulting image does not boot (beep and flashing leds)
I fear this error is not gfx related. The Nehalem code isn't widely tes- ted, I suggest trying again with different DIMMS / DIMM combinations.
Hope that helps, Nico
The current coreboot master does not boot even with VGA blob, and it looks like a memory problem as you were suggesting. In fact watching the serial console it appears that the DIMM training phase does not finish, and after a while the computer turns itself off. I've also tried different DIMMS and combinations but without success.
I'm just finished doing a `git bisect` keeping the working commit as Fallback and the one to test as a Normal. This attempt was not a success, because even with the last working commit, when selecting "Normal" mode via nvramcui, it always reboots in Fallback mode.
Do you have any other suggestions?
Thanks, Federico