W dniu 23 marca 2010 17:10 użytkownik Rudolf Marek <r.marek@assembler.cz> napisał:

Hi,

You have the hang with coreboot already running?

No, I have still problems :(

How did you setup the northbridge?

I basically used the K8T890 and the vt8737r as the southbridges
(I'm avoiding the code for vt8735 because it dose not always work)

Also, if you need to have APIC working you need:

1) set the APIC to FSB mode
2) set the VT8735 to APIC mode (might be already check) 0:11.0
3) set correctly the bypass de-assert message - some reg 0:11.0
4) set correctly (force A2 from APIC FSB to low) some reg 0:11.0

You need to setup correctly also 0:0.7 offsets 0x70-0x7f

Otherwise it will not work.

Basically call vt8237r_cfg
and disable vt8237r_vlink_init

Ok, thanks a lot for the hints
I will try this at this weekend,
see what happens