[coreboot] Patch set updated for coreboot: 6709bdd Fix multipleVGA cards resource conflict on Windows

[Kerry Sheh]

Kerry Sheh ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/489

-gerrit

commit 6709bdd2da765178084de3e72ec7d8ce36f2ec37
Author: Kerry Sheh 
Date:   Mon Dec 19 13:13:34 2011 +0800

Fix multipleVGA cards resource conflict on Windows

If multiple VGA-compatible legacy graphic cards decode the IO range
    3B0-3DF and MEM range A00000-BFFFF, Windows 7 complain a resource conflict,
    so only one VGA card can works at the same time.

By disable the IO & MEM decode of the second vga graphic device,
    this patch resolved the resource conflict in windows7, multiple
    vga-compatible graphic cards can work together in windows7.

There is a discuss in coreboot mail list before,
    please reference thread: "how to prevent legacy resource conflictwith   multipleVGA cards"

Linux using VGA Arbiter module(vgaarb) to resolve this resource conflict,
    Please see the following linux dmesg log, more information can be found in
    Linux source dir Documentation/vgaarbiter.txt.
    But it seems that windows don't dealwith this conflict.
    ~# dmesg | grep -i vgaarb
    [    0.774076] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem
    [    0.776065] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,l
    [    0.780051] vgaarb: loaded
    [    0.784049] vgaarb: bridge control possible 0000:01:00.0
    [    0.788050] vgaarb: bridge control possible 0000:00:01.0

For the second legacy graphic device, coreboot already disabled the
    IO and MEM decode in function set_vga_bridge_bits().
    But it will be enabled again in function pci_set_resource(),
    if the second legacy vga-compatible graphic device take any IO/MEM resources.

Following log printed by enable_resources() shows the problem:
    ...snip...
    PCI: 00:00.0 cmd <- 06
    PCI: 00:01.0 subsystem <- 1022/1410
    PCI: 00:01.0 cmd <- 07                <== The first graphic device
    PCI: 00:01.1 subsystem <- 1022/1410
    PCI: 00:01.1 cmd <- 02
    PCI: 00:02.0 bridge ctrl <- 0003
    PCI: 00:02.0 cmd <- 07
    ...snip...
    PCI: 01:00.0 cmd <- 03                <== The second graphic device
    PCI: 01:00.1 cmd <- 02
    PCI: 02:00.0 cmd <- 02
    PCI: 03:00.0 cmd <- 03
    done.
    ...snip...

Signed-off-by: Kerry Sheh 
    Signed-off-by: Kerry Sheh 
    Change-Id: I0de5e3761b51e2723d9c1dc0c39fff692e3a779d
---
 src/devices/pci_device.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c
index 2ccb38a..0ba7fd2 100644
--- a/src/devices/pci_device.c
+++ b/src/devices/pci_device.c
@@ -494,6 +494,21 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
    		dev->command |= PCI_COMMAND_IO;
    	if (resource->flags & IORESOURCE_PCI_BRIDGE)
    		dev->command |= PCI_COMMAND_MASTER;
+
+		/* It isn't safe to enable multiple VGA cards.
+		 * Windows will report resource conflict when more than one
+		 * VGA-compatible legacy graphic card in the system.
+		 */
+#if CONFIG_VGA_BRIDGE_SETUP == 1
+		extern device_t vga_pri;
+		if (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) &&
+			(dev != vga_pri)) {
+			if (((vga_pri->class >> 8) == PCI_CLASS_DISPLAY_VGA) &&
+				((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA)) {
+				dev->command &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+			}
+		}
+#endif
    }

/* Get the base address. */