On Tue, May 12, 2009 at 6:16 AM, Joseph Smith
<joe@settoplinux.org> wrote:
On Mon, 11 May 2009 20:54:38 +0200, Quentin RAMEAU <quinq.ml@gmail.com>
wrote:
> Hi,
>
> I have got a Veriton FP2 (
>
http://www.acersupport.com/desktop/html/vfp2.html)
> with a S511P motherboard, Intel 82815 northbridge and 82801BA
southbridge.
>
> I can do tests on it (socketed plcc32 bios and serial port available)
> I attach informations from system to this mail, I can give more if
needed.
Unfortunately the i815 northbridge is not supported YET. It is on my todo
list. The good news is there are quite a few publicly available docs so It
shouldn't be too difficult. I just don't have the time right now to do it.
If you want, you can check the supported chipsets page periodically to see
if it has been supported yet.
http://www.coreboot.org/Supported_Chipsets_and_Devices
It's also VERY similar to the i810, which is supported. IMO, the best place to start would probably be with the i810 and i815 datasheets side-by-side, find the differences, and modify i810 to fit. I have an i815 board here that I've been meaning to poke at since last fall, but there's too little time in the day. Maybe now that school's out I can get back to some of these projects.
-Corey