Actually the irqtable entries is only for
peer root pci bus scan when mptable is used.
So you need to make sure mptable is right,
and put entries for hypertransport chain other than on bus0.
YH
From:
vincente.tsou@gmail.com [mailto:vincente.tsou@gmail.com] On Behalf Of Vincente Tsou
Sent: Tuesday, June 20, 2006 7:05
PM
To: Lu, Yinghai
Cc: Stefan Reinauer;
linuxbios@linuxbios.org
Subject: Re: [LinuxBIOS] New guy
in LinuxBios
Dear YH,
excuse me, how about the irq_tables.c?
should I modify it like tyan/s2882 did.
printk_debug("setting
Onboard Broadcom NIC\n");
static const unsigned char
slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 };
pci_assign_irqs(bus_8131_1, 9,
slotIrqs_8131_1_9);
write_pirq_info(pirq_info,
bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
pirq_info++; slot_num++;
2006/6/20, Lu, Yinghai <yinghai.lu@amd.com>:
You need to update the entries at mptable.c for your slots or
onboard pci device.
YH
--
Best Regards,
Vincente Tsou
Engineer
R/D, S/W Dept.
NEXCOM International Co.
Tel: 886-2-82280606 Ext. 3205
Fax: 886-2-82280506
E-mail: vincentetsou@nexcom.com.tw
Web: http://www.nexcom.com.tw/