This is the message I got in
the end. Linuxbios tries to load the ELF image.
It seems that there are 2
segments in the ELF. In the end, linuxbios jumps to an entry that looks like
the in the middle of the first segment.
Does it look right?
The FILO.elf
doesn’t seem to load succeffully.
Gin
============================================================
Found ELF candiate at offset 0
(cleaned up) New
segment addr 0x100000 size
0x270f0 offset 0xa0 filesize 0xd068
(cleaned up) New
segment addr 0x127100 size
0x48 offset 0xd120 filesize 0x48
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz:
0x00000000000270f0 filesz: 0x00 0000000000d068
Loading Segment: addr: 0x0000000000127100 memsz:
0x0000000000000048 filesz: 0x00 00000000000048
Jumping to boot code at
0x1092e4
entry
= 0x001092e4
lb_start = 0x00004000
lb_size = 0x00024000
adjust =
0xfe5d8400
buffer =
0xfe5b8400
elf_boot_notes = 0x00015680
adjusted_boot_notes = 0xfe5eda80