coreboot-2.0.0-r4253M Tue Jul 28 03:50:01 CST 2009 starting... bsp_apicid=0x0 core0 started: 01SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x60f82. CPU Rev is K8_G0. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() begin msr fid, vid: hi=0x32111e1e, lo=0x110d0000 Current fid_cur: 0x0, fid_max: 0xd Requested fid_new: 0xd FidVid table step fidvid: 0xa FidVid table step fidvid: 0xa 200MHZ step fidvid: 0xc 100MHZ step fidvid: 0xd end msr fid, vid: hi=0x32111e11, lo=0x110d000d needs_reset=0x1 ht reset - coreboot-2.0.0-r4253M Tue Jul 28 03:50:01 CST 2009 starting... bsp_apicid=0x0 core0 started: 01SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x60f82. CPU Rev is K8_G0. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() begin msr fid, vid: hi=0x32111e11, lo=0x110d000d end msr fid, vid: hi=0x32111e11, lo=0x110d000d needs_reset=0x0 sysinfo->nodes: 1 sysinfo->ctrl: cf188 spd_addr: ffffa348 Ram1.00 Ram2.00 sdram_set_spd_registers: paramx :000cece4 Unbuffered 400MHz 400MHz RAM: 0x00100000 kB Ram3 sdram_enable: tsc0[8]: 000ceda4Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 1024MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=13 done DQS Training:DQSPos: 00 TrainDQSRdWrPos: buf_a:000ce870 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=2b done DQS SAVE NVRAM: c2000 DQS Training:tsc[00]=0000000018229146 DQS Training:tsc[01]=00000000193be158 DQS Training:tsc[02]=0000000019431284 DQS Training:tsc[03]=000000003adca380 DQS Training:tsc[04]=000000003c13aeb7 Ram4 v_esp=000cee78 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Uncompressing image to RAM. Jumping to image. coreboot-2.0.0-r4253M Tue Jul 28 03:50:01 CST 2009 booting... Enumerating buses... Mainboard DBM690T Enable. dev=0x00025690 dbm690t_enable, TOP MEM: msr.lo = 0x40000000, msr.hi = 0x00000000 dbm690t_enable, TOP MEM2: msr2.lo = 0x00000000, msr2.hi = 0x00000000 dbm690t_enable: uma size 0x08000000, memory start 0x38000000 enable_onboard_nic. Init adt7461 end , status 0x02 00 APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled rs690_enable: dev=00027908, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x00027908, dev=0x00029b68, port=0x8 PCI: 00:00.0 [1002/7910] enabled PCI: 00:00.0 [1002/7910] enabled next_unitid: 0015 PCI: pci_scan_bus for bus 00 rs690_enable: dev=00027908, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x00027908, dev=0x00029b68, port=0x8 PCI: 00:00.0 [1002/7910] enabled rs690_enable: dev=00027d54, VID_DID=0x79121002 Bus-0, Dev-1, Fun-0. PCI: 00:01.0 [1002/7912] enabled rs690_enable: dev=000281a0, VID_DID=0x79131002 Bus-0, Dev-2,3, Fun-0. enable=1 rs690_gfx_init, nb_dev=0x00027908, dev=0x000281a0, port=0x2. rs690_gfx_init step0. rs690_gfx_init step1. rs690_gfx_init step2. rs690_gfx_init step4. rs690_gfx_init step8.1. rs690_gfx_init step8.2. rs690_gfx_init step8.3. rs690_gfx_init step8.4. rs690_gfx_init step8.5. rs690_gfx_init step8.6. rs690_gfx_init step8.8. rs690_gfx_init step8.9. rs690_gfx_init step8.10. rs690_gfx_init step8.11. rs690_gfx_init step8.12. rs690_gfx_init step8.13. rs690_gfx_init single_port_configuration. PcieLinkTraining port=2:lc current state=2030400 rs690_gfx_init single_port_configuration step12. rs690_gfx_init single_port_configuration step13. rs690_gfx_init single_port_configuration step14. Disabling static device: PCI: 00:02.0 rs690_enable: dev=000285ec, VID_DID=0xffffffff Bus-0, Dev-2,3, Fun-0. enable=0 rs690_enable: dev=00028a38, VID_DID=0x79141002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x00028a38, port=0x4 PcieLinkTraining port=4:lc current state=4000102 PcieTrainPort port=0x4 result=0 PCI: 00:04.0 subbordinate bus PCI Express PCI: 00:04.0 [1002/7914] enabled rs690_enable: dev=00028e84, VID_DID=0x79151002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x00028e84, port=0x5 PcieLinkTraining port=5:lc current state=4000102 PcieTrainPort port=0x5 result=0 PCI: 00:05.0 subbordinate bus PCI Express PCI: 00:05.0 [1002/7915] enabled rs690_enable: dev=000292d0, VID_DID=0x79161002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x000292d0, port=0x6 PcieLinkTraining port=6:lc current state=4000102 PcieTrainPort port=0x6 result=0 PCI: 00:06.0 subbordinate bus PCI Express PCI: 00:06.0 [1002/7916] enabled rs690_enable: dev=0002971c, VID_DID=0x79171002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x0002971c, port=0x7 PcieLinkTraining port=7:lc current state=a0b0f10 addr=e0000004,bus=0,devfn=38 PcieTrainPort reg=0x0 PcieTrainPort port=0x7 result=1 PCI: 00:07.0 subbordinate bus PCI Express PCI: 00:07.0 [1002/7917] enabled rs690_enable: dev=00029b68, VID_DID=0x79181002 Bus-0, Dev-8, Fun-0. enable=0 disable_pcie_bar3() sb600_enable() PCI: 00:12.0 [1002/4380] enabled sb600_enable() PCI: 00:13.0 [1002/4387] enabled sb600_enable() PCI: 00:13.1 [1002/4388] enabled sb600_enable() PCI: 00:13.2 [1002/4389] enabled sb600_enable() PCI: 00:13.3 [1002/438a] enabled sb600_enable() PCI: 00:13.4 [1002/438b] enabled sb600_enable() PCI: 00:13.5 [1002/4386] enabled sb600_enable() PCI: 00:14.0 [1002/4385] enabled sb600_enable() PCI: 00:14.1 [1002/438c] enabled sb600_enable() PCI: 00:14.2 [1002/4383] enabled sb600_enable() PCI: 00:14.3 [1002/438d] enabled sb600_enable() PCI: 00:14.4 [1002/4384] enabled sb600_enable() PCI: 00:14.5 [1002/4382] enabled sb600_enable() PCI: 00:14.6 [1002/438e] enabled PCI: pci_scan_bus for bus 01 rs690_internal_gfx_enable dev=0x00029fb8, nb_dev=0x00027908. nb_dev, 0x8c=0x10002333 PCI: 01:05.0 [1002/791f] enabled PCI: 01:05.2 [1002/7919] enabled PCI: pci_scan_bus returning with max=001 PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: 05:00.0 [14e4/169d] enabled PCI: pci_scan_bus returning with max=005 PCIe: tuning PCI: 05:00.0 smbus: PCI: 00:14.0[0]->I2C: 01:50 enabled smbus: PCI: 00:14.0[0]->I2C: 01:51 enabled smbus: PCI: 00:14.0[0]->I2C: 01:52 enabled smbus: PCI: 00:14.0[0]->I2C: 01:53 enabled PNP: 002e.0 disabled PNP: 002e.1 enabled PNP: 002e.2 disabled PNP: 002e.3 disabled PNP: 002e.4 disabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PCI: pci_scan_bus for bus 06 PCI: 06:05.0 [1106/3038] enabled PCI: 06:05.1 [1106/3038] enabled PCI: 06:05.2 [1106/3104] enabled PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus returning with max=006 done Allocating resources... Reading resources... PCI: 00:00.0 register 1c(e0000004), read-only ignoring it rs690_gfx_read_resources. PCI: 00:04.0 1c <- [0x0001fff000 - 0x0001ffefff] size 0x00000000 gran 0x0c bus 02 io PCI: 00:04.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 02 prefmem PCI: 00:04.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 02 mem PCI: 00:05.0 1c <- [0x0001fff000 - 0x0001ffefff] size 0x00000000 gran 0x0c bus 03 io PCI: 00:05.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 03 prefmem PCI: 00:05.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 03 mem PCI: 00:06.0 1c <- [0x0001fff000 - 0x0001ffefff] size 0x00000000 gran 0x0c bus 04 io PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 mem PCI: 00:07.0 1c <- [0x0001fff000 - 0x0001ffefff] size 0x00000000 gran 0x0c bus 05 io PCI: 00:07.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 05 prefmem PCI: 00:14.4 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 06 prefmem Done reading resources. Allocating VGA resource PCI: 01:05.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... 0: mmio_basek=003c0000, basek=00000300, limitk=00100000 VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] size 0x00003000 gran 0x0c io PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x14 prefmem PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc4fffff] size 0x00500000 gran 0x14 mem PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io PCI: 00:01.0 24 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x14 bus 01 prefmem PCI: 00:01.0 20 <- [0x00fc000000 - 0x00fc1fffff] size 0x00200000 gran 0x14 bus 01 mem PCI: 01:05.0 10 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x1b prefmem64 PCI: 01:05.0 18 <- [0x00fc100000 - 0x00fc10ffff] size 0x00010000 gran 0x10 mem64 PCI: 01:05.0 20 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io PCI: 01:05.0 24 <- [0x00fc000000 - 0x00fc0fffff] size 0x00100000 gran 0x14 mem PCI: 01:05.0 30 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x00 romem PCI: 01:05.2 10 <- [0x00fc110000 - 0x00fc113fff] size 0x00004000 gran 0x0e mem64 PCI: 00:07.0 20 <- [0x00fc200000 - 0x00fc2fffff] size 0x00100000 gran 0x14 bus 05 mem PCI: 05:00.0 10 <- [0x00fc200000 - 0x00fc20ffff] size 0x00010000 gran 0x10 mem64 PCI: 00:12.0 10 <- [0x0000003020 - 0x0000003027] size 0x00000008 gran 0x03 io PCI: 00:12.0 14 <- [0x0000003060 - 0x0000003063] size 0x00000004 gran 0x02 io PCI: 00:12.0 18 <- [0x0000003030 - 0x0000003037] size 0x00000008 gran 0x03 io PCI: 00:12.0 1c <- [0x0000003070 - 0x0000003073] size 0x00000004 gran 0x02 io PCI: 00:12.0 20 <- [0x0000003000 - 0x000000300f] size 0x00000010 gran 0x04 io PCI: 00:12.0 24 <- [0x00fc409000 - 0x00fc4093ff] size 0x00000400 gran 0x0a mem PCI: 00:13.0 10 <- [0x00fc404000 - 0x00fc404fff] size 0x00001000 gran 0x0c mem PCI: 00:13.1 10 <- [0x00fc405000 - 0x00fc405fff] size 0x00001000 gran 0x0c mem PCI: 00:13.2 10 <- [0x00fc406000 - 0x00fc406fff] size 0x00001000 gran 0x0c mem PCI: 00:13.3 10 <- [0x00fc407000 - 0x00fc407fff] size 0x00001000 gran 0x0c mem PCI: 00:13.4 10 <- [0x00fc408000 - 0x00fc408fff] size 0x00001000 gran 0x0c mem PCI: 00:13.5 10 <- [0x00fc40a000 - 0x00fc40a0ff] size 0x00000100 gran 0x08 mem ERROR: PCI: 00:14.0 74 mem size: 0x0000001000 not assigned ERROR: PCI: 00:14.0 14 mem size: 0x0000000400 not assigned ERROR: PCI: 00:14.0 10 io size: 0x0000000010 not assigned PCI: 00:14.1 10 <- [0x0000003040 - 0x0000003047] size 0x00000008 gran 0x03 io PCI: 00:14.1 14 <- [0x0000003080 - 0x0000003083] size 0x00000004 gran 0x02 io PCI: 00:14.1 18 <- [0x0000003050 - 0x0000003057] size 0x00000008 gran 0x03 io PCI: 00:14.1 1c <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io PCI: 00:14.1 20 <- [0x0000003010 - 0x000000301f] size 0x00000010 gran 0x04 io PCI: 00:14.2 10 <- [0x00fc400000 - 0x00fc403fff] size 0x00004000 gran 0x0e mem64 PCI: 00:14.3 a0 <- [0x00fc40d000 - 0x00fc40d01f] size 0x00000020 gran 0x05 mem PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq PCI: 00:14.4 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 06 io PCI: 00:14.4 20 <- [0x00fc300000 - 0x00fc3fffff] size 0x00100000 gran 0x14 bus 06 mem PCI: 06:05.0 20 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io PCI: 06:05.1 20 <- [0x0000002020 - 0x000000203f] size 0x00000020 gran 0x05 io PCI: 06:05.2 10 <- [0x00fc300000 - 0x00fc3000ff] size 0x00000100 gran 0x08 mem PCI: 00:14.5 10 <- [0x00fc40b000 - 0x00fc40b0ff] size 0x00000100 gran 0x08 mem PCI: 00:14.6 10 <- [0x00fc40c000 - 0x00fc40c0ff] size 0x00000100 gran 0x08 mem PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 00 PCI: 00:00.0 subsystem <- 1022/3050 PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 bridge ctrl <- 000b PCI: 00:01.0 cmd <- 07 PCI: 01:05.0 subsystem <- 1022/3050 PCI: 01:05.0 cmd <- 03 PCI: 01:05.2 cmd <- 02 PCI: 00:04.0 bridge ctrl <- 0003 PCI: 00:04.0 cmd <- 00 PCI: 00:05.0 bridge ctrl <- 0003 PCI: 00:05.0 cmd <- 00 PCI: 00:06.0 bridge ctrl <- 0003 PCI: 00:06.0 cmd <- 00 PCI: 00:07.0 bridge ctrl <- 0003 PCI: 00:07.0 cmd <- 06 PCI: 05:00.0 cmd <- 02 PCI: 00:12.0 cmd <- 03 PCI: 00:13.0 subsystem <- 1022/3050 PCI: 00:13.0 cmd <- 02 PCI: 00:13.1 subsystem <- 1022/3050 PCI: 00:13.1 cmd <- 02 PCI: 00:13.2 subsystem <- 1022/3050 PCI: 00:13.2 cmd <- 02 PCI: 00:13.3 subsystem <- 1022/3050 PCI: 00:13.3 cmd <- 02 PCI: 00:13.4 subsystem <- 1022/3050 PCI: 00:13.4 cmd <- 02 PCI: 00:13.5 subsystem <- 1022/3050 PCI: 00:13.5 cmd <- 02 PCI: 00:14.0 subsystem <- 1022/3050 PCI: 00:14.0 cmd <- 403 PCI: 00:14.1 subsystem <- 1022/3050 PCI: 00:14.1 cmd <- 01 PCI: 00:14.2 subsystem <- 1022/3050 PCI: 00:14.2 cmd <- 02 PCI: 00:14.3 subsystem <- 1022/3050 PCI: 00:14.3 cmd <- 0f sb600 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff sb600 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 sb600 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 PCI: 00:14.4 bridge ctrl <- 0003 PCI: 00:14.4 cmd <- 07 PCI: 06:05.0 cmd <- 01 PCI: 06:05.1 cmd <- 01 PCI: 06:05.2 cmd <- 02 PCI: 00:14.5 subsystem <- 1022/3050 PCI: 00:14.5 cmd <- 02 PCI: 00:14.6 subsystem <- 1022/3050 PCI: 00:14.6 cmd <- 02 PCI: 00:18.1 subsystem <- 1022/3050 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 1022/3050 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 cmd <- 00 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 60f82 CPU: family 0f, model 68, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB Setting variable MTRR 1, base: 1024MB, range: 128MB, type WB Setting variable MTRR 2, base: 896MB, range: 128MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Turion(tm) 64 X2 Mobile Technology TL-62 Setting up local apic... apic_id: 0x00 done. ECC Disabled CPU #0 initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device 60f82 CPU: family 0f, model 68, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB Setting variable MTRR 1, base: 1024MB, range: 128MB, type WB Setting variable MTRR 2, base: 896MB, range: 128MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Turion(tm) 64 X2 Mobile Technology TL-62 Setting up local apic... apic_id: 0x01 done. CPU #1 initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:00.0 init pcie_init in rs690_ht.c PCI: 01:05.0 init internal_gfx_pci_dev_init device=791f, vendor=1002, vga_rom_address=0xfff00000. On mainboard, rom address for PCI: 01:05.0 = fff00000 Device or Vendor ID mismatch Vendor 1106, Device 3038 PCI: 00:12.0 init No Primary Master SATA drive on Slot0 No Primary Slave SATA drive on Slot1 No Secondary Master SATA drive on Slot2 No Secondary Slave SATA drive on Slot3 PCI: 00:13.0 init PCI: 00:13.1 init PCI: 00:13.2 init PCI: 00:13.3 init PCI: 00:13.4 init PCI: 00:13.5 init usb2_bar0=fc40a000 PCI: 00:14.0 init sm_init(). lapicid = 0000000000000000 set power on after power fail ++++++++++no set NMI+++++ RTC Init 3.11, ABCFG:0x54 3.12, ABCFG:0x54 sm_init() end PCI: 00:14.1 init On mainboard, rom address for PCI: 00:14.1 = 0 PCI: 00:14.2 init base = fc400000 codec_mask = 04 codec viddid: 10ec0882 Dev=PCI: 00:14.2 Default viddid=10ec0882 Reading viddid=10ec0882 verb_size: 48 verb loaded! PCI: 00:14.3 init PNP: 002e.1 init PNP: 002e.5 init Keyboard init... Keyboard selftest failed ACK: 0xfe PNP: 002e.6 init PCI: 00:14.4 init PCI: 00:18.1 init On mainboard, rom address for PCI: 00:18.1 = 0 PCI: 00:18.2 init On mainboard, rom address for PCI: 00:18.2 = 0 PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 01:05.2 init On card, rom address for PCI: 01:05.2 = 0 PCI: 05:00.0 init On card, rom address for PCI: 05:00.0 = 0 PCI: 06:05.0 init On card, rom address for PCI: 06:05.0 = 0 PCI: 06:05.1 init On card, rom address for PCI: 06:05.1 = 0 PCI: 06:05.2 init On card, rom address for PCI: 06:05.2 = 0 Devices initialized High Tables Base is 3fff0000. Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done. Writing IRQ routing tables to 0x3fff0000...write_pirq_routing_table done. ACPI: Writing ACPI tables at 3fff0400... ACPI: * HPET ACPI: added table 1/9 Length now 40 ACPI: * MADT ACPI: added table 2/9 Length now 44 ACPI: * SSDT processor_brand=AMD Turion(tm) 64 X2 Mobile Technology TL-62 Pstates Algorithm ... Pstate_freq[0] = 2100MHz Pstate_vid[0] = 19 Pstate_volt[0] = 1075mv Pstate_power[0] = 35 000mw Pstate_freq[1] = 2000MHz Pstate_vid[1] = 20 Pstate_volt[1] = 1050mv Pstate_power[1] = 31 800mw Pstate_freq[2] = 1800MHz Pstate_vid[2] = 21 Pstate_volt[2] = 1025mv Pstate_power[2] = 27 274mw Pstate_freq[3] = 1600MHz Pstate_vid[3] = 22 Pstate_volt[3] = 1000mv Pstate_power[3] = 23 075mw Pstate_freq[4] = 800MHz Pstate_vid[4] = 30 Pstate_volt[4] = 800mv Pstate_power[4] = 7384mw ACPI: added table 3/9 Length now 48 ACPI: * FACS ACPI: * DSDT ACPI: * DSDT @ 3fff08ba Length 267c ACPI: * FADT pm_base: 0x0800 ACPI: added table 4/9 Length now 52 ACPI: done. Wrote the mp table end at: 00000020 - 00000134 Wrote the mp table end at: 3fff3410 - 3fff3524 Moving GDT to 0x3fff3800...ok Multiboot Information structure has been written. Writing high table forward entry at 0x00000500 Wrote coreboot table at: 00000500 - 00000518 checksum 83df New low_table_end: 0x00000500 Now going to write high coreboot table at 0x3fff3c00 rom_table_end = 0x3fff3c00 Adjust low_table_end from 0x00000500 to 0x00001000 Adjust rom_table_end from 0x3fff3c00 to 0x40000000 Adding high table area uma_memory_base=0x38000000, uma_memory_size=0x8000000 Wrote coreboot table at: 3fff3c00 - 3fff3de4 checksum c82a elfboot: Attempting to load payload. rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 New segment addr 0xf0000 size 0x10000 offset 0x1000 filesize 0x10000 (cleaned up) New segment addr 0xf0000 size 0x10000 offset 0x1000 filesize 0x10000 Dropping non PT_LOAD segment Loading Segment: addr: 0x00000000000f0000 memsz: 0x0000000000010000 filesz: 0x0000000000010000 Jumping to boot code at 000fc275 Start bios init ivt init bda init pic init timer tsc calibrate start=3490760611 end=3494368211 diff=3607600 CPU Mhz=2101 math cp init bios_table_addr: 0x000fd500 end=0x000fdd00 Find memory size Attempting to find coreboot table Found coreboot table forwarder. Now attempting to find coreboot memory map init SMBIOS tables SMBIOS table addr=0x000fd500 Ram Size=0x38000000 Found 2 cpu(s) init PNPBIOS table Scan for VGA option rom Attempting to init PCI bdf 01:05.0 (dev/ven 791f1002) Copying option rom (size 0) from 0xfff10000 to c0000 Checking rom 0x000c0000 (sig 0 size 0) init keyboard i8042 ctr old=0 new=20 Got ps2 nak (status=51); continuing ps2_recvbyte timeout keyboard command 2ff failed init lpt Found 0 lpt ports init serial Found 1 serial ports init mouse e820 map has 5 items: 0: 0000000000000000 - 000000000009fc00 = 1 1: 000000000009fc00 - 00000000000a0000 = 2 2: 00000000000f0000 - 0000000000100000 = 2 3: 0000000000100000 - 0000000038000000 = 1 4: 0000000038000000 - 0000000040000000 = 2 final bios_table_addr: 0x000fd5e3 (used 11%) init boot device ordering init floppy drives init hard drives ATA controller 0 at 3020/3060 (dev 90 prog_if 8f) ATA controller 1 at 3030/3070 (dev 90 prog_if 8f) ATA controller 2 at 1f0/3f0 (dev a1 prog_if 8a) ATA controller 3 at 170/370 (dev a1 prog_if 8a) powerup iobase=3020 st=7f powerup iobase=3020 st=7f ata_detect drive=0 sc=7f sn=7f dh=7f powerup iobase=3020 st=7f powerup iobase=3020 st=7f ata_detect drive=1 sc=7f sn=7f dh=7f powerup iobase=3030 st=7f powerup iobase=3030 st=7f ata_detect drive=2 sc=7f sn=7f dh=7f powerup iobase=3030 st=7f powerup iobase=3030 st=7f ata_detect drive=3 sc=7f sn=7f dh=7f powerup IDE floating powerup IDE floating ata_detect drive=4 sc=ff sn=ff dh=ff powerup IDE floating powerup IDE floating ata_detect drive=5 sc=ff sn=ff dh=ff powerup IDE floating powerup IDE floating ata_detect drive=6 sc=ff sn=ff dh=ff powerup IDE floating powerup IDE floating ata_detect drive=7 sc=ff sn=ff dh=ff Scan for option roms Attempting to init PCI bdf 00:00.0 (dev/ven 79101002) Attempting to map option rom on dev 00:00.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:01.0 (dev/ven 79121002) Attempting to map option rom on dev 00:01.0 Skipping non-normal pci device (type=1) Attempting to init PCI bdf 00:04.0 (dev/ven 79141002) Attempting to map option rom on dev 00:04.0 Skipping non-normal pci device (type=1) Attempting to init PCI bdf 00:05.0 (dev/ven 79151002) Attempting to map option rom on dev 00:05.0 Skipping non-normal pci device (type=1) Attempting to init PCI bdf 00:06.0 (dev/ven 79161002) Attempting to map option rom on dev 00:06.0 Skipping non-normal pci device (type=1) Attempting to init PCI bdf 00:07.0 (dev/ven 79171002) Attempting to map option rom on dev 00:07.0 Skipping non-normal pci device (type=1) Attempting to init PCI bdf 00:13.0 (dev/ven 43871002) Copying option rom (size 130560) from 0xfff00000 to c0800 Checking rom 0x000c0800 (sig aa55 size 255) Running option rom at c080:0003 hello, initialize_usb 00:13.0 4387:1002.0 OHCI controller Not supported. 00:13.1 4388:1002.1 OHCI controller Not supported. 00:13.2 4389:1002.2 OHCI controller Not supported. 00:13.3 438a:1002.3 OHCI controller Not supported. 00:13.4 438b:1002.4 OHCI controller Not supported. 00:13.5 4386:1002.5 EHCI controller Not supported. 06:05.0 3038:1106.0 UHCI controller INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... coreboot-2.0.0-r4253M Tue Jul 28 03:50:01 CST 2009 starting... bsp_apicid=0x0 core0 started: 01SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x60f82. CPU Rev is K8_G0. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() begin msr fid, vid: hi=0x32111e11, lo=0x110d000d end msr fid, vid: hi=0x32111e11, lo=0x110d000d needs_reset=0x0 sysinfo->nodes: 1 sysinfo->ctrl: cf188 spd_addr: ffffa348 Ram1.00 Ram2.00 sdram_set_spd_registers: paramx :000cece4 Unbuffered 400MHz 400MHz RAM: 0x00100000 kB Ram3 sdram_enable: tsc0[8]: 000ceda4Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 1024MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=13 done DQS Training:DQSPos: 00 TrainDQSRdWrPos: buf_a:000ce870 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 TrainDQSPos: MutualCSPassW[48] :000ce754 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=2b done DQS SAVE NVRAM: c2000 DQS Training:tsc[00]=000000001835b4ac DQS Training:tsc[01]=00000000194f4600 DQS Training:tsc[02]=000000001956846b DQS Training:tsc[03]=000000003b1e21bf DQS Training:tsc[04]=000000003c557cc7 Ram4 v_esp=000cee78 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Uncompressing image to RAM. Jumping to image. coreboot-2.0.0-r4253M Tue Jul 28 03:50:01 CST 2009 booting... Enumerating buses... Mainboard DBM690T Enable. dev=0x00025690 dbm690t_enable, TOP MEM: msr.lo = 0x40000000, msr.hi = 0x00000000 dbm690t_enable, TOP MEM2: msr2.lo = 0x00000000, msr2.hi = 0x00000000 dbm690t_enable: uma size 0x08000000, memory start 0x38000000 enable_onboard_nic. Init adt7461 end , status 0x02 00 APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled rs690_enable: dev=00027908, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x00027908, dev=0x00029b68, port=0x8 PCI: 00:00.0 [1002/7910] enabled PCI: 00:00.0 [1002/7910] enabled next_unitid: 0015 PCI: pci_scan_bus for bus 00 rs690_enable: dev=00027908, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x00027908, dev=0x00029b68, port=0x8 PCI: 00:00.0 [1002/7910] enabled rs690_enable: dev=00027d54, VID_DID=0x79121002 Bus-0, Dev-1, Fun-0. PCI: 00:01.0 [1002/7912] enabled rs690_enable: dev=000281a0, VID_DID=0x79131002 Bus-0, Dev-2,3, Fun-0. enable=1 rs690_gfx_init, nb_dev=0x00027908, dev=0x000281a0, port=0x2. rs690_gfx_init step0. rs690_gfx_init step1. rs690_gfx_init step2. rs690_gfx_init step4. rs690_gfx_init step8.1. rs690_gfx_init step8.2. rs690_gfx_init step8.3. rs690_gfx_init step8.4. rs690_gfx_init step8.5. rs690_gfx_init step8.6. rs690_gfx_init step8.8. rs690_gfx_init step8.9. rs690_gfx_init step8.10. rs690_gfx_init step8.11. rs690_gfx_init step8.12. rs690_gfx_init step8.13. rs690_gfx_init single_port_configuration. PcieLinkTraining port=2:lc current state=2030400 rs690_gfx_init single_port_configuration step12. rs690_gfx_init single_port_configuration step13. rs690_gfx_init single_port_configuration step14. Disabling static device: PCI: 00:02.0 rs690_enable: dev=000285ec, VID_DID=0xffffffff Bus-0, Dev-2,3, Fun-0. enable=0 rs690_enable: dev=00028a38, VID_DID=0x79141002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x00028a38, port=0x4 PcieLinkTraining port=4:lc current state=4000102 PcieTrainPort port=0x4 result=0 PCI: 00:04.0 subbordinate bus PCI Express PCI: 00:04.0 [1002/7914] enabled rs690_enable: dev=00028e84, VID_DID=0x79151002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x00028e84, port=0x5 PcieLinkTraining port=5:lc current state=4000102 PcieTrainPort port=0x5 result=0 PCI: 00:05.0 subbordinate bus PCI Express PCI: 00:05.0 [1002/7915] enabled rs690_enable: dev=000292d0, VID_DID=0x79161002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x00027908, dev=0x000292d0, port=0x6