I
get 5.2.6 but the vga stack when reachs:
Jumping
to boot code at 0x20000
I enable btext.
Sagiv
-----Original Message-----
From: YhLu [mailto:YhLu@tyan.com]
Sent:
To: Sagiv Yefet;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
Please get the Etherboot
You need to use patch for
Regards
YH
From: Sagiv Yefet [mailto:sagivy@3vium.com]
Sent:
To: YhLu;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
Great,
It solved the problem.
About
the etherboot I try to run with
It
stack in: Jumping to LinuxBIOS
When
I use the
Command:
Make bin/r8169.zelf
Now
the elf image is loading and there is no respond from the VGA..
The
kernel parameter is: console=tty0.
Maybe
I didn't patch the kernel with the correct patch file.
Where
can I get the patch of the kernel supporting ATI Ragexl?
I am using
Thanks,
Sagiv
-----Original
Message-----
From: YhLu [mailto:YhLu@tyan.com]
Sent:
To: Sagiv Yefet;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
In the
targest/tyan/s2850/Config.lb
Change
option
ROM_IMAGE_SIZE=0x10000
to
option ROM_IMAGE_SIZE=0x11800
option XIP_ROM_SIZE=0x20000
From: Sagiv Yefet [mailto:sagivy@3vium.com]
Sent:
To: YhLu; linuxbios@clustermatic.org
Subject: RE: Running with VGA
I
try to build freebios2-20041216-0400
And
I get this compilation error:
gcc
-nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/
collect2:
ld returned 1 exit status
make:
*** [linuxbios] Error 1
What
do you think it is?
Sagiv.
-----Original
Message-----
From: YhLu [mailto:YhLu@tyan.com]
Sent:
To: Sagiv Yefet; linuxbios@clustermatic.org
Subject: RE: Running with VGA
I commit the changes for you.
Please check it out from
http://snapshots.linuxbios.org/
one hour later.
YH
From: Sagiv Yefet [mailto:sagivy@3vium.com]
Sent:
To: YhLu;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
I have this definition in
targets/tyan/s2850/Config.lb:
option CONFIG_CONSOLE_BTEXT=1
Not default as you wrote.
Is it ok?
Should I had the same thing in
src/mainboard/tyan/s2850/Config.lb?
Sagiv.
-----Original
Message-----
From: Yinghai Lu
[mailto:yhlu@tyan.com]
Sent:
To: Sagiv Yefet;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
You need to add
uses CONFIG_CONSOLE_BTEXT
default CONFIG_CONSOLE_BTEXT=1
dir /drivers/ati/ragexl
after that you can get ouput in
Linuxbios after vga init.
You also need to enable the btext
in Etherboot. You should use Etherboot
About kernel, you need to use
kernel patch to enable ragexl frame buffer support.
YH
From: linuxbios-admin@clustermatic.org
[mailto:linuxbios-admin@clustermatic.org] On
Behalf Of Sagiv Yefet
Sent:
To: linuxbios@clustermatic.org
Subject: Running with VGA
Hello,
I
am using Linux Bios on Tyan 2850. The machine is running with console.
I
add to the command line: "console=ttyS0,115200" and I have linux
which runs with console.
How can I
run with VGA? Should I add some code to the bios?
The
VGA driver is: ATI Rage XL.
Sagiv