Thanks Uwe,
I flashed the linuxbios.rom and used a JTAG interface to debug it. But what happens is I can't see the initial jump in the rom code. I tried other rom from
http://qa.linuxbios.org/overview.php and the same problem happened. With the original rom image I can debug with no problems.
Do you know what could be the problem?
Otávio
On Thu, May 17, 2007 at 09:32:45AM -0300, Otávio Alcântara wrote:
> I'm porting linuxbios to a plataform similar to msm800sel board (same
> processor, companion e superio) and I'm in doubt about burning flash memory.
> After compiling the code the generated elf format linuxbios.rom file can be
> used to burn the memory or there's another step to convert the file to a
> binary format?
Usually you flash the linuxbios.rom, yes. If this is the first time you
do it, make sure you have a backup facility (extra chip with your
original BIOS etc. etc.)
Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFGTE8MXdVoV3jWIbQRAgELAJ9vU4MHnkjJJpBBined8oJXF0UeJgCeJrhO
FmWrk3ENPSMmOOdqQ3TcDuc=
=PuLW
-----END PGP SIGNATURE-----