Hi,
This is little modification for TIM-5690. Thanks.
Signed-off-by: Libra Li libra.li@technexion.com
Index: src/mainboard/technexion/tim5690/mainboard.c =================================================================== --- src/mainboard/technexion/tim5690/mainboard.c (revision 4821) +++ src/mainboard/technexion/tim5690/mainboard.c (working copy) @@ -47,37 +47,6 @@ uint64_t uma_memory_base, uma_memory_size;
- -/*************************************************** -* This board, the TIM-5690 has two Marvel 88e5056 PCI-E -* 10/100/1000 chips on board. -* Both of their pin PERSTn pins are connected to GPIO 5 of the -* SB600 southbridge. -****************************************************/ -static void enable_onboard_nic() -{ - - u8 byte; - device_t sm_dev; - - printk_info("enable_onboard_nic.\n"); - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0x9a); - byte |= ( 1 << 7); - pci_write_config8(sm_dev, 0x9a, byte); - - byte=pm_ioread(0x59); - byte &= ~( 1<< 5); - pm_iowrite(0x59,byte); - - byte = pci_read_config8(sm_dev, 0xA8); - - byte |= (1 << 1); //set bit 1 to high - pci_write_config8(sm_dev, 0xA8, byte); -} - /* set thermal config */ static void set_thermal_config() @@ -193,7 +162,6 @@ uma_memory_base = 0x38000000; /* 1GB system memory supposed */ #endif
- enable_onboard_nic(); set_thermal_config(); }
Index: targets/technexion/tim5690/Config.lb =================================================================== --- targets/technexion/tim5690/Config.lb (revision 4821) +++ targets/technexion/tim5690/Config.lb (working copy) @@ -8,9 +8,6 @@ #option CONFIG_ROM_SIZE = (1024*1024*2) #option CONFIG_ROM_SIZE = (1024*1024*4)
-option CONFIG_COMPRESSED_PAYLOAD_LZMA=1 - - romimage "normal" option CONFIG_USE_FALLBACK_IMAGE=0 option CONFIG_ROM_IMAGE_SIZE=0x20000