LinuxBIOS-1.0.0 Mon Jan 27 19:49:10 CLST 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Mon Jan 27 19:49:10 CLST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 handle_superio start, nsuperio 1 handle_superio Pass 0, check #0, s 0000ba00 s->super 0000bcb8 handle_superio: Pass 0, Superio SiS 950 handle_superio port 0x0, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 0, done #0 handle_superio done Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1039/0730] PCI: 00:00.1 [1039/5513] PCI: 00:01.0 [1039/0008] PCI: 00:01.1 [1039/0900] PCI: 00:01.2 [1039/7001] PCI: 00:01.3 [1039/7001] PCI: 00:01.4 [1039/7018] PCI: 00:01.6 [1039/7013] PCI: 00:02.0 [1039/0001] PCI: 00:0b.0 [1105/8300] PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [1039/6300] PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c8f] io PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io PCI: 00:01.1 14 <- [0xfc200000 - 0xfc200fff] mem PCI: 00:01.2 10 <- [0xfc201000 - 0xfc201fff] mem PCI: 00:01.3 10 <- [0xfc202000 - 0xfc202fff] mem PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io PCI: 00:01.4 14 <- [0xfc203000 - 0xfc203fff] mem PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 io PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 prefmem PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 mem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io ASSIGNED RESOURCES, bus 1 PCI: 00:0b.0 10 <- [0xfc100000 - 0xfc1fffff] mem ASSIGNED RESOURCES, bus 0 Allocating VGA resource done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07 PCI: 00:00.1 cmd <- 01 PCI: 00:01.0 cmd <- 0c PCI: 00:01.1 cmd <- 03 PCI: 00:01.2 cmd <- 02 PCI: 00:01.3 cmd <- 02 PCI: 00:01.4 cmd <- 03 PCI: 00:01.6 cmd <- 01 PCI: 00:02.0 cmd <- 27 PCI: 00:0b.0 cmd <- 02 PCI: 01:00.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized totalram: 152M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 128MB, type WB Setting variable MTRR 1, base: 128MB, range: 16MB, type WB Setting variable MTRR 2, base: 144MB, range: 8MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done. Max cpuid index : 1 Vendor ID : AuthenticAMD Processor Type : 0x00 Processor Family : 0x06 Processor Model : 0x03 Processor Mask : 0x00 Processor Stepping : 0x01 Feature flags : 0x0183f9ff MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Disabling local apic...done. CPU #0 Initialized Enabled in SIS 503 regs 0x40 and 0x45 Shadow memory disabled in SiS 730 handle_superio start, nsuperio 1 handle_superio Pass 1, check #0, s 0000ba00 s->super 0000bcb8 handle_superio: Pass 1, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 1, done #0 handle_superio done PCCHIPS M810LMR (and similar)...Entering the initregs process Southbridge fixup done for SIS 503 handle_superio start, nsuperio 1 handle_superio Pass 2, check #0, s 0000ba00 s->super 0000bcb8 handle_superio: Pass 2, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call finishup handle_superio Pass 2, done #0 handle_superio done Copying IRQ routing tables to 0xf0000...done. Verifing priq routing tables copy at 0xf0000...succeed Wrote linuxbios table at: 00000500 - 00000664 checksum cba Jumping to linuxbiosmain()... Welcome to start32, the open sourced starter. This space will eventually hold more diagnostic information. January 2000, James Hendricks, Dale Webster, and Ron Minnich. Version 0.1 init_bytes Gunzip setup gunzip_setup output data is 0x00100000 Gunzipping boot code 43:fill_inbuf() - ram buffer:0x00018b70 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00010000 block_count:0 inbuf[0] is 0x1f flush 0x00100000 count 0x00008000 flush 0x00108000 count 0x00008000 flush 0x00110000 count 0x00008000 flush 0x00118000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00020000 block_count:1 inbuf[0] is 0x3c flush 0x00120000 count 0x00008000 flush 0x00128000 count 0x00008000 flush 0x00130000 count 0x00008000 flush 0x00138000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00030000 block_count:2 inbuf[0] is 0x4d flush 0x00140000 count 0x00008000 flush 0x00148000 count 0x00008000 flush 0x00150000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00040000 block_count:3 inbuf[0] is 0x94 flush 0x00158000 count 0x00008000 flush 0x00160000 count 0x00008000 flush 0x00168000 count 0x00008000 flush 0x00170000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00050000 block_count:4 inbuf[0] is 0xd7 flush 0x00178000 count 0x00008000 flush 0x00180000 count 0x00008000 flush 0x00188000 count 0x00008000 flush 0x00190000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00060000 block_count:5 inbuf[0] is 0xc5 flush 0x00198000 count 0x00008000 flush 0x001a0000 count 0x00008000 flush 0x001a8000 count 0x00008000 flush 0x001b0000 count 0x00008000 flush 0x001b8000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00070000 block_count:6 inbuf[0] is 0x74 flush 0x001c0000 count 0x00008000 flush 0x001c8000 count 0x00008000 flush 0x001d0000 count 0x00008000 flush 0x001d8000 count 0x00008000 done memcpy_from_doc_mil 53:fill_inbuf() - nvram:0x00080000 block_count:7 inbuf[0] is 0xc2 flush 0x001e0000 count 0x00008000 flush 0x001e8000 count 0x00008000 flush 0x001f0000 count 0x00008000 flush 0x001f8000 count 0x00008000 flush 0x00200000 count 0x00008000 flush 0x00208000 count 0x00005f00 <983> fini_bytes command line - [root=/dev/hda1 console=ttyS0,115200 console=tty0 single] Jumping to boot code