[coreboot] Re: [RFH] Test Lenovo X230 with master?

[Merlin Büge]

Hi,

so I have found that on the X230, current master
> commit aa8b1f8b38bf1abcb6dd8c6f5f510c3006d0eec6
>     mb/system76: Configure I2C HID IRQs as level triggered

works with SeaBIOS 1.16 and GRUB 2.04, but not with GRUB 2.06.

Attached is a defconfig that works. If I add these two lines, I get the
issue described in the original post:
> CONFIG_GRUB2_REVISION=y
> CONFIG_GRUB2_REVISION_ID="grub-2.06"

I just found this, it's probably the issue described there:

https://review.coreboot.org/c/coreboot/+/55343

Sorry for the noise!

Merlin

On Tue, 3 May 2022 14:46:48 +0200, Paul Menzel wrote:
> Dear coreboot folks,
>
> In #[e-mail] a user reported, that flashing coreboot 
> built from master (commit aa8b1f8b38 (mb/system76: Configure I2C HID 
> IRQs as level triggered)) to SPI2 does not boot.
> > Display black but lit, no display output. I don't have coreboot logs.
> > Blinking power button + micmute button.
>
> Unfortunately, the user does not have any equipment to get any logs, and 
> SPI flash console is not supported.
>
> Could somebody with such equipment please verify, and provide the logs?
>
> Kind regards,
>
> Paul
>
> PS: `defconfig`:
> CONFIG_VENDOR_LENOVO=y
> CONFIG_CBFS_SIZE=0x400000
> CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=1600
> CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=2560
> CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
> CONFIG_HAVE_IFD_BIN=y
> CONFIG_PCIEXP_HOTPLUG_BUSES=8
> CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
> CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
> CONFIG_BOARD_LENOVO_X230=y
> CONFIG_UART_PCI_ADDR=0x0
> CONFIG_VALIDATE_INTEL_DESCRIPTOR=y
> CONFIG_H8_SUPPORT_BT_ON_WIFI=y
> CONFIG_HAVE_ME_BIN=y
> CONFIG_CHECK_ME=y
> CONFIG_USE_ME_CLEANER=y
> CONFIG_HAVE_GBE_BIN=y
> CONFIG_LOCK_MANAGEMENT_ENGINE=y
> CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
> CONFIG_PCIEXP_HOTPLUG_IO=0x2000
> CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
> CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
> CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
> CONFIG_POST_IO_PORT=0x80
> CONFIG_PAYLOAD_GRUB2=y
> CONFIG_GRUB2_REVISION=y
> CONFIG_GRUB2_REVISION_ID="grub-2.06"
> CONFIG_GRUB2_EXTRA_MODULES="nativedisk crypto cryptodisk luks luks2 
> gcry_serpent gcry_twofish gcry_rijndael gcry_sha1 gcry_sha256 
> gcry_sha512 gcry_crc password_pbkdf2 part_gpt btrfs cat bsd png 
> gfxterm_background all_video usbserial_ftdi usbserial_pl2303"
> CONFIG_COREINFO_SECONDARY_PAYLOAD=y
> CONFIG_MEMTEST_SECONDARY_PAYLOAD=y
> CONFIG_NVRAMCUI_SECONDARY_PAYLOAD=y
>
> coreboot mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]