Hello Naveed,

For you to read: https://en.wikipedia.org/wiki/Physical_Address_Extension

Important: With PAE, IA-32 architecture is augmented with additional address lines used to select the additional memory, so physical address size increases from 32 bits to 36 bits. 

Then, after reading, this can/will help you: https://wj32.org/wp/2011/02/23/pae-patch-updated-for-windows-7-sp1/

Zoran


On Tue, Jun 7, 2016 at 6:23 AM, Naveed Ghori <naveed.ghori@dti.com.au> wrote:

Hi all,

 

I am booting a 32 bit Win 7 image (via Seabios).

 

Windows is detecting only 1.92GB (even though there is 8GB of memory available.

Being a 32 bit OS I would have expected it to see at least 4GB.

 

Coreboot logs shows:

Available memory below 4GB: 0x7ae00000 (1966M)

Available memory above 4GB: 6144M

 

What can cause the full 4GB to not be seen. Should I install only 4GB of memory instead of 4GB? I have ordered some to try in any case.

 

Best Regards,

Naveed

Naveed Ghori | Lead Firmware & Driver Engineer

DTI Group Ltd | Transit Security & Surveillance

31 Affleck Road, Perth Airport, Western Australia 6105, AU

P +61 8 9373 2905,151 | F +61 8 9479 1190 | naveed.ghori@dti.com.au



Visit our website www.dti.com.au

The information contained in this email is confidential. If you receive this email in error, please inform DTI Group Ltd via the above contact details. If you are not the intended recipient, you may not use or disclose the information contained in this email or attachments.


--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot