Ludwig Jaffe wrote:
> Hi,
>
> looking for the unprotect-algorithm I found the AN1122 from ST.
> The figure 4 shows a way to do this, but, how do we put VID=12V to Pin#1?
> Does anybody know how this is done or if we should use the
> programmer-mode/way instaed of insystem/mode/way?
>
> Thanks for your comments.
>
> Attached the application-note, and the datasheet of st29F002B series.
>
>
> Greetings
>
> LuJa
>
>
from the other tread i assume you are talking about the
compaq deskpro en sff 600n motherboard which has a jumper (P34 but not
mounted only pads) to connect pin1 to 12Vdc

---

Express yourself instantly with MSN Messenger! MSN Messenger