[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-bpo.2-486 (Debian 2.6.38-5~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Tue Jun 14 11:07:47 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7be000 (usable) [ 0.000000] BIOS-e820: 000000000f7be000 - 000000000f7e0000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI present. [ 0.000000] DMI: PC Engines ALIX.1C, BIOS 4.0-2408-gad422c0 05/27/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xf7be max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000f7be000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000f400000 page 2M [ 0.000000] 000f400000 - 000f7be000 page 4k [ 0.000000] kernel direct mapping tables up to f7be000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 0b7f5000 - 0ba0e000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 247MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0f7be000 [ 0.000000] low ram: 0 - 0f7be000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000f7be [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000f7be [ 0.000000] On node 0 totalpages: 63309 [ 0.000000] free_area_init_node: node 0, pgdat c13a4fd8, node_mem_map cf5cd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 464 pages used for memmap [ 0.000000] Normal zone: 58862 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at f7e0000 (gap: f7e0000:f0820000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62813 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-bpo.2-486 root=UUID=db00af1b-7a21-4968-9087-92bb7cb92ee0 ro quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 244080k/253688k available (2504k kernel code, 9156k reserved, 1254k data, 472k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xcffbe000 - 0xff7fe000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcf7be000 ( 247 MB) [ 0.000000] .init : 0xc13ac000 - 0xc1422000 ( 472 kB) [ 0.000000] .data : 0xc12720e4 - 0xc13ab980 (1254 kB) [ 0.000000] .text : 0xc1000000 - 0xc12720e4 (2504 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=cf00a000 soft=cf010000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 497.973 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 995.94 BogoMIPS (lpj=1991892) [ 0.004037] pid_max: default: 32768 minimum: 301 [ 0.004267] Security Framework initialized [ 0.004289] SELinux: Disabled at boot. [ 0.004391] Mount-cache hash table entries: 512 [ 0.004803] Initializing cgroup subsys ns [ 0.004819] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004839] Initializing cgroup subsys cpuacct [ 0.004880] Initializing cgroup subsys devices [ 0.004896] Initializing cgroup subsys freezer [ 0.004911] Initializing cgroup subsys net_cls [ 0.004925] Initializing cgroup subsys blkio [ 0.005085] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02 [ 0.012061] Performance Events: no PMU driver, software events only. [ 0.012707] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.012928] devtmpfs: initialized [ 0.014365] print_constraints: dummy: [ 0.014560] NET: Registered protocol family 16 [ 0.015081] EISA bus registered [ 0.017090] PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=0 [ 0.017107] PCI: Using configuration type 1 for base access [ 0.019862] bio: create slab at 0 [ 0.020158] ACPI: Interpreter disabled. [ 0.020440] vgaarb: loaded [ 0.020650] PCI: Probing PCI hardware [ 0.020665] PCI: Probing PCI hardware (bus 00) [ 0.021015] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600 [ 0.021163] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f] [ 0.022027] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300 [ 0.022327] pci 0000:00:01.1: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.022547] pci 0000:00:01.1: reg 14: [mem 0xfe000000-0xfe003fff] [ 0.022764] pci 0000:00:01.1: reg 18: [mem 0xfe004000-0xfe007fff] [ 0.022972] pci 0000:00:01.1: reg 1c: [mem 0xfe008000-0xfe00bfff] [ 0.023181] pci 0000:00:01.1: reg 20: [mem 0xfe00c000-0xfe00ffff] [ 0.023857] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010 [ 0.024139] pci 0000:00:01.2: reg 10: [mem 0xfe010000-0xfe013fff] [ 0.025466] pci 0000:00:0d.0: [1106:3053] type 0 class 0x000200 [ 0.025504] pci 0000:00:0d.0: reg 10: [io 0x1000-0x10ff] [ 0.025533] pci 0000:00:0d.0: reg 14: [mem 0xfe019000-0xfe0190ff] [ 0.025610] pci 0000:00:0d.0: supports D1 D2 [ 0.025628] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold [ 0.025648] pci 0000:00:0d.0: PME# disabled [ 0.025790] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601 [ 0.026140] pci 0000:00:0f.0: reg 10: [io 0x1cb0-0x1cb7] [ 0.026434] pci 0000:00:0f.0: reg 14: [io 0x1400-0x14ff] [ 0.026733] pci 0000:00:0f.0: reg 18: [io 0x1c00-0x1c3f] [ 0.027026] pci 0000:00:0f.0: reg 1c: [io 0x1c80-0x1c9f] [ 0.027329] pci 0000:00:0f.0: reg 20: [io 0x1800-0x187f] [ 0.027648] pci 0000:00:0f.0: reg 24: [io 0x1c40-0x1c7f] [ 0.028233] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101 [ 0.029233] pci 0000:00:0f.2: reg 20: [io 0x1ca0-0x1caf] [ 0.029909] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401 [ 0.030189] pci 0000:00:0f.3: reg 10: [io 0x1880-0x18ff] [ 0.031597] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03 [ 0.031980] pci 0000:00:0f.4: reg 10: [mem 0xfe016000-0xfe016fff] [ 0.033479] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold [ 0.033553] pci 0000:00:0f.4: PME# disabled [ 0.033851] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03 [ 0.034228] pci 0000:00:0f.5: reg 10: [mem 0xfe017000-0xfe017fff] [ 0.035686] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold [ 0.035758] pci 0000:00:0f.5: PME# disabled [ 0.036319] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=mem,locks=none [ 0.037993] pci 0000:00:0f.0: default IRQ router [1022:2090] [ 0.038253] PCI: pci_cache_line_size set to 32 bytes [ 0.038748] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.038767] reserve RAM buffer: 000000000f7be000 - 000000000fffffff [ 0.039279] Switching to clocksource pit [ 0.042123] pnp: PnP ACPI: disabled [ 0.042140] PnPBIOS: Scanning system for PnP BIOS support... [ 0.042448] PnPBIOS: Found PnP BIOS installation structure at 0xc00fd220 [ 0.042473] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc0c5, dseg 0xf0000 [ 0.048331] PnPBIOS: dev_node_info: function not supported on this system [ 0.048368] PnPBIOS: Unable to get node info. Aborting. [ 0.062313] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.062336] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.062540] NET: Registered protocol family 2 [ 0.062861] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.063980] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.064186] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.064336] TCP: Hash tables configured (established 8192 bind 8192) [ 0.064352] TCP reno registered [ 0.064370] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.064402] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.065001] NET: Registered protocol family 1 [ 0.065138] pci 0000:00:01.1: Boot video device [ 0.066127] PCI: CLS 64 bytes, default 32 [ 0.066324] Unpacking initramfs... [ 0.472576] Freeing initrd memory: 2148k freed [ 0.475242] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.476379] audit: initializing netlink socket (disabled) [ 0.476423] type=2000 audit(1338160014.472:1): initialized [ 0.537234] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.550403] VFS: Disk quotas dquot_6.5.2 [ 0.550773] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.551196] msgmni has been set to 480 [ 0.552105] alg: No test for stdrng (krng) [ 0.552440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.552460] io scheduler noop registered [ 0.552474] io scheduler deadline registered [ 0.552562] io scheduler cfq registered (default) [ 0.553392] lxfb 0000:00:01.1: guessed PCI INT A -> IRQ 11 [ 0.553487] lxfb 0000:00:01.1: sharing IRQ 11 with 0000:00:01.2 [ 0.558878] lxfb 0000:00:01.1: 8192 KB of video memory at 0xfd000000 [ 0.577858] fbcon: Geode LX (fb0) is primary device [ 0.587270] Console: switching to colour frame buffer device 80x30 [ 0.595395] fb0: Geode LX frame buffer device [ 0.596006] isapnp: Scanning for PnP cards... [ 0.951319] isapnp: No Plug & Play device found [ 0.951655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.956375] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.957115] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.958626] Linux agpgart interface v0.103 [ 0.959661] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.962157] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.962188] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.963005] mousedev: PS/2 mouse device common for all mice [ 0.963444] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.963494] rtc0: alarms up to one day, 114 bytes nvram [ 0.963753] EISA: Probing bus 0 at eisa.0 [ 0.963779] Cannot allocate resource for EISA slot 1 [ 0.963874] EISA: Detected 0 cards. [ 0.963888] cpuidle: using governor ladder [ 0.963903] cpuidle: using governor menu [ 0.966059] TCP cubic registered [ 0.967196] NET: Registered protocol family 10 [ 0.971397] Mobile IPv6 [ 0.971413] NET: Registered protocol family 17 [ 0.971438] Registering the dns_resolver key type [ 0.971491] Using IPI Shortcut mode [ 0.972113] PM: Hibernation image not present or could not be loaded. [ 0.972162] registered taskstats version 1 [ 0.973199] rtc_cmos rtc_cmos: setting system clock to 2012-05-27 23:06:55 UTC (1338160015) [ 0.973317] Initalizing network drop monitor service [ 0.973654] Freeing unused kernel memory: 472k freed [ 0.974416] Write protecting the kernel text: 2508k [ 0.974545] Write protecting the kernel read-only data: 984k [ 1.061190] udev[43]: starting version 164 [ 1.532912] Switching to clocksource tsc [ 1.538543] SCSI subsystem initialized [ 1.768580] libata version 3.00 loaded. [ 1.794805] pata_amd 0000:00:0f.2: version 0.4.1 [ 1.798475] scsi0 : pata_amd [ 1.799324] scsi1 : pata_amd [ 1.799698] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1ca0 irq 14 [ 1.799720] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1ca8 irq 15 [ 1.957017] spurious 8259A interrupt: IRQ7. [ 1.981224] ata1.00: CFA: TS4GCF133, 20101110, max UDMA/66 [ 1.981246] ata1.00: 7831152 sectors, multi 0: LBA [ 1.981286] ata1.01: ATA-0: PQI IDE DiskOnModule, YUAN1026, max UDMA/33 [ 1.981308] ata1.01: 1015056 sectors, multi 0: LBA [ 1.997132] ata1.00: configured for UDMA/66 [ 2.005125] ata1.01: configured for UDMA/33 [ 2.005536] scsi 0:0:0:0: Direct-Access ATA TS4GCF133 2010 PQ: 0 ANSI: 5 [ 2.007314] scsi 0:0:1:0: Direct-Access ATA PQI IDE DiskOnMo YUAN PQ: 0 ANSI: 5 [ 2.009074] ata2: port disabled. ignoring. [ 2.169889] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 2.170162] sd 0:0:0:0: [sda] Write Protect is off [ 2.170185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.170306] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.173152] sd 0:0:1:0: [sdb] 1015056 512-byte logical blocks: (519 MB/495 MiB) [ 2.173671] sd 0:0:1:0: [sdb] Write Protect is off [ 2.173695] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.173817] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.176448] sda: sda1 sda2 [ 2.180397] sdb: unknown partition table [ 2.181813] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.182061] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.554078] EXT3-fs (sda1): recovery required on readonly filesystem [ 2.554100] EXT3-fs (sda1): write access will be enabled during recovery [ 2.554879] EXT3-fs: barriers not enabled [ 11.499431] kjournald starting. Commit interval 5 seconds [ 11.499491] EXT3-fs (sda1): recovery complete [ 11.508443] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 12.080378] udev[163]: starting version 164 [ 12.622477] AMD Geode RNG detected [ 12.644274] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 12.657867] cs5535_gpio: module is from the staging directory, the quality is unknown, you have been warned. [ 12.685230] cs5535_gpio: base=0x1400 mask=0xb003c66 major=252 [ 12.895625] Geode LX AES 0000:00:01.2: guessed PCI INT A -> IRQ 11 [ 12.895707] Geode LX AES 0000:00:01.2: sharing IRQ 11 with 0000:00:01.1 [ 12.950860] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 13.183400] padlock_aes: VIA PadLock not detected. [ 13.392069] usbcore: registered new interface driver usbfs [ 13.393291] usbcore: registered new interface driver hub [ 13.403660] usbcore: registered new device driver usb [ 13.436579] geode-aes: GEODE AES engine enabled. [ 13.437047] via-rhine 0000:00:0d.0: guessed PCI INT A -> IRQ 10 [ 13.437240] via-rhine 0000:00:0d.0: sharing IRQ 10 with 0000:00:0f.3 [ 13.453138] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:0e:0d:28, IRQ 10. [ 13.453878] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1. [ 13.504609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.504844] ehci_hcd 0000:00:0f.5: guessed PCI INT D -> IRQ 9 [ 13.506556] ehci_hcd 0000:00:0f.5: sharing IRQ 9 with 0000:00:0f.4 [ 13.506688] ehci_hcd 0000:00:0f.5: setting latency timer to 64 [ 13.506729] ehci_hcd 0000:00:0f.5: EHCI Host Controller [ 13.506818] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 [ 13.540144] ehci_hcd 0000:00:0f.5: cache line size of 64 is not supported [ 13.540200] ehci_hcd 0000:00:0f.5: irq 9, io mem 0xfe017000 [ 13.551504] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 [ 13.551621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.551645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.551664] usb usb1: Product: EHCI Host Controller [ 13.551682] usb usb1: Manufacturer: Linux 2.6.38-bpo.2-486 ehci_hcd [ 13.551700] usb usb1: SerialNumber: 0000:00:0f.5 [ 13.552893] hub 1-0:1.0: USB hub found [ 13.552924] hub 1-0:1.0: 4 ports detected [ 13.656042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 13.656247] ohci_hcd 0000:00:0f.4: guessed PCI INT D -> IRQ 9 [ 13.656478] ohci_hcd 0000:00:0f.4: sharing IRQ 9 with 0000:00:0f.5 [ 13.656609] ohci_hcd 0000:00:0f.4: setting latency timer to 64 [ 13.656649] ohci_hcd 0000:00:0f.4: OHCI Host Controller [ 13.656708] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2 [ 13.656785] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe016000 [ 13.752213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.752239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.752259] usb usb2: Product: OHCI Host Controller [ 13.752276] usb usb2: Manufacturer: Linux 2.6.38-bpo.2-486 ohci_hcd [ 13.752295] usb usb2: SerialNumber: 0000:00:0f.4 [ 13.754061] hub 2-0:1.0: USB hub found [ 13.754095] hub 2-0:1.0: 4 ports detected [ 13.854469] usbcore: registered new interface driver usbserial [ 13.854572] USB Serial support registered for generic [ 13.863811] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 14.053485] usb 1-1: New USB device found, idVendor=0951, idProduct=162d [ 14.053511] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.053531] usb 1-1: Product: DataTraveler 102 [ 14.053547] usb 1-1: Manufacturer: Kingston [ 14.053563] usb 1-1: SerialNumber: 0013728EE05CAA20662B00E5 [ 14.057240] usbcore: registered new interface driver usbserial_generic [ 14.057259] usbserial: USB Serial Driver core [ 14.184928] usbcore: registered new interface driver uas [ 14.217426] USB Serial support registered for GSM modem (1-port) [ 14.219011] usbcore: registered new interface driver option [ 14.219029] option: v0.7.2:USB Driver for GSM modems [ 14.307914] Initializing USB Mass Storage driver... [ 14.312005] scsi2 : usb-storage 1-1:1.0 [ 14.312903] usbcore: registered new interface driver usb-storage [ 14.312919] USB Mass Storage support registered. [ 14.392249] cs5535audio 0000:00:0f.3: guessed PCI INT B -> IRQ 10 [ 14.392359] cs5535audio 0000:00:0f.3: sharing IRQ 10 with 0000:00:0d.0 [ 14.392601] cs5535audio 0000:00:0f.3: setting latency timer to 64 [ 15.320905] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 102 1.00 PQ: 0 ANSI: 2 [ 15.326097] sd 2:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 15.326825] sd 2:0:0:0: [sdc] Write Protect is off [ 15.326849] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 15.327937] sd 2:0:0:0: [sdc] No Caching mode page present [ 15.328212] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 15.333433] sd 2:0:0:0: [sdc] No Caching mode page present [ 15.333709] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 15.441345] sdc: sdc1 [ 15.446337] sd 2:0:0:0: [sdc] No Caching mode page present [ 15.446612] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 15.446891] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 15.664938] EXT3-fs (sda1): using internal journal [ 16.134996] loop: module loaded [ 16.334570] ppdev: user-space parallel port driver [ 16.433038] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 18.643802] EXT3-fs: barriers not enabled [ 18.644347] kjournald starting. Commit interval 5 seconds [ 18.644408] EXT3-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended [ 18.658821] EXT3-fs (sdb): using internal journal [ 18.658838] EXT3-fs (sdb): recovery complete [ 18.658858] EXT3-fs (sdb): mounted filesystem with ordered data mode [ 18.662283] EXT3-fs: barriers not enabled [ 18.663059] kjournald starting. Commit interval 5 seconds [ 18.665497] EXT3-fs (sda2): using internal journal [ 18.665519] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 19.252603] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 29.435811] sshd (948): /proc/948/oom_adj is deprecated, please use /proc/948/oom_score_adj instead. [ 29.890865] eth0: no IPv6 routers present