Run flashrom with no parameters and it should tell you what Rom chip you have.<br><br>Before you pull the trigger you should make sure that you have a way to recover the original BIOS (with out the use of the computer you are doing this to).<br><br>Mvh Anders<br><br><div id="htc_header" style="">----- Reply message -----<br>Fra: &quot;Daniel J. Celta&quot; &lt;dcelta@gmail.com&gt;<br>Dato: man., jul. 5, 2010 23:02<br>Emne: [coreboot] H8DME-2<br>Til: &lt;coreboot@coreboot.org&gt;<br><br></div>Has anyone updated this Supermicro server Board BIOS for the H8DME-2......<br><br>I have installed FC10, (i was able to complete this installation by turning of the RAID configuration in the BIOS), and now I am having trouble when trying to upgrade the Operating system to FC13.  <br>
<br><br>I suspect, if I update the BIOS, I currently have the version of the BIOS that came pre-installed with the server, I may be able to upgrade to FC13.<br><br>One thing I like to mention, when running &quot;make menuconfig&quot; I was not sure of the ROM Chip size, and used the largest available setting 4MB.<br>
<br>- How can I check the proper setting for this parameter????<br><br><br><br>So now, I have created the coreboot.rom, and think I am ready to run &quot;flashrom&quot;.......  <br><br>- Is there anything else I need to check before I pull the trigger???<br>
 <br>- Has anyone had any problems I should be aware of????<br><br><br>Thanks<br><br>Daniel<br>